ADEMCO Security System VISTA-10SE Instrucciones de funcionamiento

N7227PRGDV3 6/01

A-

-1

Security System

Programming Guide

ARMED

READY

PANIC

OFF AWAY STAY

MAX TEST BYPASS

INSTANT CODE CHIME

READY

123

654

897

ON OFF

- 2 -

- 3 -

Table of Contents

•••••••••••••••••••••••••••••••••••••••••••••••••

Programming Guide........................................................................5

System Setup..............................................................................................5

Zone Sounds and Timing............................................................................5

Dialer Programming....................................................................................5

Zone Assignment/Alarm Report Codes......................................................6

RF Expansion Zones ..................................................................................7

Explanation of Zone Assignment Table Headings......................................7

System Status Report Codes......................................................................8

Restore Report Codes ................................................................................8

Output and System Setup...........................................................................8

Download Information.................................................................................9

Output Relays Worksheet..........................................................................10

Alpha Vocabulary List................................................................... 11

Enrolled Transmitters.................................................................... 12

5800 Series Transmitter Input Loop Identification...................... 13

Summary of Connections Diagram.............................................. 15

- 4 -

Programming Form

– 5 –

Local programming requires the use of a 2-line alpha keypad (e.g., 6139) connected to the keypad terminals on the control.

To set all program fields to ADEMCO default values: Press ✱97.

Field Function [ ] = Default Value Programmed Values Field Function [ ] = Default Value Programmed Values

SYSTEM SETUP (✱

✱✱

✱20 – ✱

✱✱

✱30)

✱20 INSTALLER CODE [4 1 1 1] | | |

Enter 4 digits, 0–9

✱21 QUICK ARM ENABLE [0] †

1 = enable: 0 = disable

✱22 RF SYSTEM TYPE [0] †

0 = none; 2 = 5800 (5881/5882)

4 = 5800 w/ RF Jam Detection

✱23 FORCED BYPASS FUNCTION [0] †

0 = none; 1 = bypass faulted zones

✱24 RF HOUSE ID CODE [00] |

00 = disable all wireless keypad usage;

01–31 = when using 5827 and 5827BD keypad

✱25 OUTPUT RELAY MODULE [0] †

0 = none; 3 = 4204

✱26 VOICE MODULE ACCESS CODE [0] |

1st digit: Enter 1-9;

2nd digit: Enter only # + 11 for ✱, # + 12 for #.

0 in either position = disables phone module

✱27 OUTPUT TO LONG RANGE RADIO [0] †

0 = no; 1 = yes. If yes selected, dialer reports to Primary

No. (field ✱47) will also be sent via LRR. All dialer and LRR

reports will be in Contact ID®format (overriding field ✱46)

UL Installations: Must be set to 0.

ZONE SOUNDS AND TIMING (✱

✱✱

✱28 – ✱

✱✱

✱39)

✱28 SINGLE ALARM SOUNDING/ZONE [0] †

0 = no limit; 1 = once per arming period

UL Installations: Must be 0.

✱29 FIRESOUNDERTIMEOUT [0] †

0 = fire sounder timeout; 1 = no fire sounder timeout.

✱30 ALARM BELL TIMEOUT [1] †

0 = none; 1 = 4 min; 2 = 8 min;

3 = 12 min; 4 = 16 min

UL Installations: Must be set to 1 (minimum).

✱38 ENTRY DELAY [2] †

0 = 0 sec; 1 = 20 sec; 2 = 30 sec; 3 = 45 sec;

4 = 60 sec; 5 = 90 sec

UL Installations: 45 seconds (maximum).

EXIT Delay = ENTRY Delay + 15 sec.

✱39 AUDIBLE EXIT WARNING [1] †

0 = no; 1 = yes

DIALER PROGRAMMING (✱

✱✱

✱40 – ✱

✱✱

✱50)

In fields ✱40, ✱41, and ✱42, enter up to the number of digits shown. Do not fill unused spaces. Enter 0–9; # +11 for ✱;

# +12 for #; # +13 for a pause.

✱40 PABX ACCESS CODE | | |

Enter up to 4 digits if PABX code is needed to access an

outside line. If fewer than 4 digits are entered, do not fill

unused spaces.

Exit by pressing ✱(and press 41, if entering next field). To

clear entries from this field, press ✱40✱ .

✱41 PRIMARY PHONE NO.

| | | | | | | | | | |

Enter up to 12 digits; do not fill unused spaces. If fewer than

12 digits entered, exit by pressing ✱(and press 42, if

entering next field). To clear entries from this field, press

✱41✱.

✱42 SECONDARY PHONE NO.

| | | | | | | | | | |

Enter up to 12 digits; do not fill unused spaces. If fewer than

12 digits entered, exit by pressing ✱(and press 43, if

entering next field). To clear entries from this field, press

✱42✱.

✱43 SUBSCRIBER ACCOUNT NUMBER

| | |

Enter 0–9; # +11 for B; # +12 for C; # +13 for D;

# +14 for E; # +15 for F. Enter ✱as 4th digit if 3+1 dialer

reporting is to be used. Enter 0 as the first digit of a 4-digit

account number for Nos. 0000-0999.

Exit by pressing ✱(and press next field).

To clear entries from this field, press ✱43✱.

Examples:

For Acct. No. 1234, enter: 1 | 2 | 3 | 4

For Acct. No. B234, enter: #+11| 2 | 3 | 4

For Acct. No. 123, enter: 1 | 2 | 3 | ✱

✱45 PHONE SYSTEM SELECT [1] †

If Cent. Sta. is NOT on a WATS line:

0 = Pulse Dial; 1 = Tone Dial;

If Cent. Sta. IS on a WATS line:

2 = Pulse Dial; 3 = Tone Dial

†Entry of a number other than one specified will give unpredictable results.

– 6 –

✱46 REPORT FORMAT [7] †

0 = 3+1, 4+1 ADEMCO L/S STANDARD

1= 3+1, 4+1 RADIONICS STANDARD

2= 4+2 ADEMCO L/S STANDARD

3 = 4+2 RADIONICS STANDARD

or undefined = 4+2 ADEMCO EXPRESS

= ADEMCO CONTACT ID®REPORTING

= 3+1, 4+1 ADEMCO L/S EXPANDED

= 3+1, 4+1 RADIONICS EXPANDED

For an explanation of these formats, refer to the

SYSTEM COMMUNICATION section of the

Installation Instructions.

✱47 SPLIT/DUAL REPORTING [0]

0 = Disable (Backup report only)

TO PRIMARY PHONE NO. TO SECONDARY PHONE NO.

1 = Alarms, Restore, Cancel Other Reports

2 = All except Open/Close, Test Open/Close, Test

3 = Alarms, Restore, Cancel All Reports

4 = All except Open/Close, Test All Reports

5=All (Dual Reporting) All Reports

TO PRIMARY PHONE NO. TO PAGING NO.* (Secondary)

6=AllexceptOpen/Close **Alarms,Open/Close, Troubles

7=Allreports **Alarms,Troubles

8=Allreports **Alarms,Open/Close, Troubles

9 = All except Open/Close **Alarms, Open/Close for

users 5-25***, Troubles

*Can only be used if Primary reporting is ADEMCO Contact

ID®.

A 10-digit code is sent to the pager consisting of a 4-digit

Subscriber No., a 3-digit Event code, and a 3-digit User (or

Zone No.). See VISTA-10SE Installation Instructions for an

explanation of the paging format.

*** Refer to field ✱47 in the DATA FIELD DESCRIPTIONS

section of the Installation Instructions.

✱48 15 SEC DIALER DELAY (BURG) [0] †

0 = no delay; 1 = 15 sec delay

UL installations: 0 must be selected .

✱49 PERIODIC TEST MESSAGE [0] †

0 = none; 1 = 24 hours; 2 = weekly; 3 = monthly

(Enter Test Code in field ✱64.)

UL installations: 1 (24 hours) must be selected.

✱50 SESCOA/RADIONICS SELECT [0] †

0 = Radionics (0 – 9, B – F reporting);

1 = SESCOA (0 – 9 only reporting)

Select 0 for all other formats.

✱51 CONFIRMATION OF ARMING DING [0] †

0 = disables ding;

1 = enables 1/2 sec ding

2 =

enables 1/2 sec ding from RF arming

✱52 ZONE 3 RESPONSE TO OPEN [0] †

0 = 400mS nominal; 1 = 10mS nominal

†Entry of a number other than one specified will give unpredictable results.

✱

✱✱

✱56 / ✱

✱✱

✱58 ZONE ASSIGNMENT/ALARM REPORT CODES

These fields are interactive modes. Fill in the required data on the worksheet below (and on next page) and follow

the programming procedure in the installation manual. Zone Types are shown on the next page of this manual.

NOTE: All numbers in brackets [ ] are default settings.

ZONES ON CONTROL: See explanation of headings on next page →

→→

→

ZONE ZONE ALARM RPT CODE INPUT RF

ZONE NO. TYPE (Hex) TYPE INPUT

DESCRIPTION (Zn) (ZT) (RC) (In) (RT)

Wired Zone 1 0 1 [01] [01] [00] HW —

Wired Zone 2 0 2[04] [01] [00] HW —

Wired Zone 3 0 3[03] [01] [00] HW —

Wired Zone 4 04[03] [01] [00] HW —

Wired Zone 5 05[09] [01] [00] HW —

Wired Zone 6 06[07] [01] [00] HW —

Keypad Panic (✱& #, or B) 07[06] [01] [00] ——

Keypad Duress 08——[00] [00] ——

Tamper 0 9 05[01] [00] — —

Keypad Panic (1 & ✱, or A) 95[00] [01] [00] — —

Keypad Panic (3 & #, or C) 96[00] [01] [00] — —

– 7 –

RF EXPANSION ZONES: Assign zone numbers (Zn) 10–25 to 5881L (up to 8); 5881M or 5881H (up to 16).

NOTE: All numbers in brackets [ ] are default settings.

ZONE ZONE ZONE ALARM RPT CODE INPUT LEARNED

DESCRIPTION NO. TYPE (Hex) TYPE RF INPUT

(Zn) (ZT) (RC) (In) (L)

RF Zones 1 0 [00] [01] [00] [03] [1]

1 1 [00] [01] [00] [03] [1]

1 2 [00] [01] [00] [03] [1]

1 3 [00] [01] [00] [03] [1]

1 4 [00] [01] [00] [03] [1]

1 5 [00] [01] [00] [03] [1]

1 6 [00] [01] [00] [03] [1]

1 7 [00] [01] [00] [03] [1]

1 8 [00] [01] [00] [03] [1]

1 9 [00] [01] [00] [03] [1]

2 0 [00] [01] [00] [03] [1]

2 1 [00] [01] [00] [03] [1]

2 2 [00] [01] [00] [03] [1]

2 3 [00] [01] [00] [03] [1]

2 4 [00] [01] [00] [03] [1]

2 5 [00] [01] [00] [03] [1]

EXPLANATION OF ZONE ASSIGNMENT TABLE HEADINGS

Zn = ZONE NO.

Hardwired Zone Numbers run from 01 to 06. Wireless zones run from 10 to 25.

Pre-assigned zones (if programmed): 7, 8, and 9.

With Field

✱22 set for RF (5800), use Zone Nos. 10-25.

ZT =ZONE TYPE

00 = Zone Not Used

01 = Entry/Exit

02 = Do not use

03 = Perimeter

04 = Interior Follower

05 = Trouble Day/Alarm Night

06 = 24-Hr Silent

07 = 24-Hr Audible

08 = 24-Hr Aux

09 = Fire

10 = Interior w/ Delay

20 = Arm–STAY*

21 = Arm–AWAY*

22 = Disarm*

23 = No Alarm Response

* 20, 21, and 22 used for 5800 RF systems only

RC = ALARM REPORT CODE

Two hex digits. For each hex digit, enter: 00–09 for 0–9; 10 for A; 11 for B; 12 for C; 13 for D; 14 for E;

15 for F.

If 00 is entered in the first pair of boxes, there will be no report for that zone.

For Contact ID®reporting, this is an enabling code only. Enter any hex digit (other than 00) in the first pair of

boxes. The second pair of boxes is ignored.

In = INPUT TYPE

HW = Hardwired zone (automatic for zones 1 – 6)

Enter 3 for RF: Supervised RF (default)

Enter 4 for UR: Unsupervised RF

Enter 5 for BR: Button-Type RF

L = RF INPUT LOOP

Used with 5800 RF Input Devices. Record transmitter input number.

– 8 –

SYSTEM STATUS REPORT CODES (✱

✱✱

✱60 – ✱

✱✱

✱68)

TO PROGRAM SYSTEM STATUS & RESTORE

REPORT CODES (✱60– ✱75):

With a 3+1 or 4+1 Standard Format: Enter a code in the first

box: 1–9, 0, B, C, D, E, or F. Enter #+10 for 0, #+11 for B, #+12

for C, #+13 for D, #+14 for E, #+15 for F.

A 0 (not #+10) in the first box will disable a report.

A 0 (not #+10) in the second box will result in automatic

advance to the next field when programming.

With an Expanded or 4+2 Format: Enter codes in both boxes

(1st and 2nd digits) for 1–9, 0, or B–F, as described above.

A 0 (not #+10) in the second box will eliminate the expanded

message for that report.

A 0 (not #+10) in both boxes will disable the report.

With ADEMCO Contact ID®Reporting: Enter any digit (other

than 0) in the first box, to enable zone to report (entries in the

second boxes will be ignored).

A 0 (not #+10) in the first box will disable the report.

Examples:

For Code

3(single digit), enter: 3 | 0

For Code

3 2 (two digits), enter: 3 | 2

For Code

B 2 (Hexadecimal), enter: #+11 | 2

✱60 TROUBLE REPORT CODE [00] |

✱61 BYPASS REPORT CODE [00] |

✱62 AC LOSS REPORT CODE

[00] |

✱63 LOW BAT REPORT CODE [00] |

✱64 TEST REPORT CODE [00] |

✱65 OPEN/EXIT ALARM RPT CODE [00] |

2nd digit of OPEN REPORT is automatically sent as the

user number if expanded or 4+2 reporting is selected.

2nd digit of EXIT ALARM REPORT is automatically sent as

the 2nd digit of the zone alarm report code programmed in

✱56, if expanded or 4+2 reporting is selected.

✱66 AWAY/STAY CLOSE RPT CODE [00] |

2nd digit of any CLOSE REPORT is automatically sent as

the user number, if expanded or 4+2 reporting is selected.

✱67 RF XMTR LOW BAT RPT CODE [00] |

✱68 CANCEL REPORT CODE [00] |

RESTORE REPORT CODES (✱

✱✱

✱70 – ✱

✱✱

✱75)

✱70 ALARM RESTORE RPT CODE [0]

2nd digit is automatically sent as the 2nd digit of

the zone alarm report code programmed in ✱56,

if expanded or 4+2 reporting is selected.

✱71 TROUBLE RESTORE RPT CODE [00] |

✱72 BYPASS RESTORE RPT CODE [00] |

✱73 AC RESTORE RPT CODE [00] |

✱74 LOW BAT RESTORE RPT CODE [00] |

✱75 RF XMTR LO BAT RST RPT CODE [00] |

OUTPUT AND SYSTEM SETUP (✱

✱✱

✱80 – ✱

✱✱

✱93)

✱80 OUTPUT RELAYS

✱81 ZONE LISTS FOR

OUTPUT RELAYS

Program only if relays are

to be used. Refer to the

Output Relays Worksheet

on page 8.

✱82 CUSTOM ALPHA EDITING (Also entered from field

✱56) See procedure in Installation Instructions.

✱91 OPTION SELECTION (AAV) [0]

0 = None;

4 = AAV;

8 = Enable Exit Delay Restart;

# + 12 = Both enabled

0 for UL installations.

NOTE: AAV should not be used when Paging or

Alarm reports are being sent to a secondary number.

See Audio Alarm Verification (AAV) in the Installation

Instructions.

✱92 REPORTS PER ARMED PERIOD [0]

0 = 10 max total alarm + alarm restore;

1 = unlimited

1st Entry 2nd Entry

✱93 DYNAMIC SIGNALING [0] †[0]

†

DS Delay DS Priority

DS Delay; 0-15 times a 15-sec delay

1 = 15 secs; 2 = 30 secs; 3 = 45 secs;

4 = 60 secs…etc.

0 = No delay. (Reports are sent to both

the Primary Phone No. and LRR).

UL installations: set for 0 (No delay)

DS Priority; 0 = Send message to Primary

Phone No. first;

1 = Send message to LRR first

†Entry of a number other than one specified will give unpredictable results.

– 9 –

DOWNLOAD INFORMATION (✱

✱✱

✱94- ✱

✱✱

✱97)

✱94 DOWNLOAD PHONE NO.

| | | | | | | | | | |

Enter up to 12 digits, 0–9; #+11 for ✱; #+12 for #;

# + 13 for a pause. Do not fill unused spaces. If

fewer than 12 digits entered, exit field by pressing ✱

(and press 95, if entering next field). To clear

entries from this field, press ✱94✱.

✱95 RING DET COUNT FOR DWNLDING [0]

0 = Disable Station Initiated Download; 1–14 =

number of rings (1–9, # +10 =10, # +11 =11,

# +12 =12, # +13 =13, # +14 =14); 15 = answering

machine defeat (# +15 =15)

✱96 INITIALIZES DOWNLOAD ID, SUBSCRIBER

ACCOUNT NO. FOR INITIAL DOWNLOAD.

No data entry required.

✱97 SETS ALL PROGRAM FIELDS TO ADEMCO

DEFAULT VALUES. No data entry required.

EXITS (✱

✱✱

✱98, ✱

✱✱

✱99)

✱98 Exits programming mode and prevents re-entry

by: Installer Code + 8+ 0. If ✱98 is used to exit

programming mode, system must be powered

down. Then power up, and press ✱and # within

50 seconds of power-up.

✱99 Exits programming mode and allows re-entry by:

Installer Code + 8 + 0; or powerup, then press ✱

and # within 50 seconds of powerup.

– 10 –

OUTPUT RELAYS WORKSHEET FOR FIELDS ✱80 and ✱81.

Applicable only if 4204 relays are to be used.

✱80 OUTPUT RELAYS – This is an Interactive Menu mode. Fill in the required data on the worksheet below and follow the

programming procedure in the installation manual as you enter the data in response to the displays and prompts that

appear in sequence.

Notes: 1. For Relays, field ✱25 must be programmed for a 4204 relay module (enter 3).

2. Tampers of contacts or an expansion unit cannot be used to operate relays.

START

either or both STOP

either or both

OUTPUT

RELAY

ACTION

(A)

ZONE

EVENT LIST

(EV) (ZL)

ZONE TYPE

SYSTEM OPERATION

(ZT)

RESTORE of

ZONE LIST

(ZL)

ZONE TYPE/

SYSTEM OPERATION

(ZT)

Where: A = DEVICE ACTION 0 = No response; 1 = Close for 2 sec; 2 = Close and stay closed; 3 = Pulse on and off.

EV = EVENT 0 = Not used; 1 = Alarm; 2 = Fault; 3 = Trouble.

ZL = ZONE LIST 1, 2, or 3 (from Field ✱81) or 0 = Not used.

START ZONE LIST: Upon alarm, fault, or trouble of ANY zone on this list, relay action

will START.

STOP RESTORE of ZONE LIST: Upon restore of ALL zones on this list, device action

will STOP. It need not be same list as used for START.

ZT = ZONE TYPE/SYSTEM OPERATION

Choices for Zone Types are:

00 = Not Used 06 = 24-Hr Silent

01 = Entry/Exit #1 07 = 24-Hr Audible

03 = Perimeter 08 = 24-Hr Aux

04 = Interior Follower 09 = Fire

05 = Trouble Day/Alarm Night 10 = Interior w/ Delay

Note: Any zone in "ZT" going into

alarm, fault, or trouble will

actuate relay.

Any zone of that type that

restores will stop relay action.

Choices for System Operation are:

20 = Arming–STAY 36 = At Bell Timeout**

21 = Arming–AWAY 38 = Chime

22 = Disarming (Code + OFF) 39 = Any Fire Alarm

31 = End of Exit Time 40 = Bypassing

32 = Start of Entry Time 41 = AC Power Failure

33 = Any Burglary Alarm 42 = System Battery Low

34 = Code + # + 7 Key Entry 58 = Duress

35 = Code + # + 8 Key Entry

** Or at Disarming, whichever occurs first.

✱81 ZONE LISTS FOR OUTPUT RELAYS Record desired zone numbers. More or fewer boxes than shown may be

needed, since any list may include any or all of system's zone numbers.

Zone List 01: Started or stopped by zone numbers (enter 00 to end entries).

, , , , , , , , , ...etc.

Zone List 02: Started or stopped by zone numbers (enter 00 to end entries).

, , , , , , , , , ...etc.

Zone List 03: Started or stopped by zone numbers (enter 00 to end entries).

, , , , , , , , , ...etc.

Otros manuales para Security System VISTA-10SE

Tabla de contenidos

Otros manuales de Sistema de seguridad de ADEMCO

ADEMCO

ADEMCO Vista-20 Manual de usuario

ADEMCO

ADEMCO LYNX Manual de usuario

ADEMCO

ADEMCO 4110 Manual de usuario

ADEMCO

ADEMCO VISTA-48D Instrucciones de montaje

ADEMCO

ADEMCO VISTA-32FB Instrucciones de montaje

ADEMCO

ADEMCO LYNXR Manual del propietario

ADEMCO

ADEMCO VISTA-20SEA Manual de usuario

ADEMCO

ADEMCO 4140 Manual de usuario

ADEMCO

ADEMCO VISTA-32FB Instrucciones de montaje

ADEMCO

ADEMCO VISTA-128B Manual de usuario

ADEMCO

ADEMCO VISTA-100 Manual de usuario

ADEMCO

ADEMCO Security System VISTA-15 Instrucciones de montaje

ADEMCO

ADEMCO Security System VISTA-10SE Manual de usuario

ADEMCO

ADEMCO 4110DL Manual de usuario

ADEMCO

ADEMCO Security System VISTA-15 Instrucciones de funcionamiento

ADEMCO

ADEMCO VISTA-20P Series Instrucciones de funcionamiento

ADEMCO

ADEMCO Vista 4140XMPT Manual de usuario

ADEMCO

ADEMCO Vista-10P Instrucciones de montaje

ADEMCO

ADEMCO VISTA-50PEN Instrucciones de montaje

ADEMCO

ADEMCO LYNXR-EN Manual de usuario

ADEMCO

ADEMCO 4130XM Manual de usuario

ADEMCO

ADEMCO Vista-10P Manual de usuario

ADEMCO

ADEMCO Ademco N7001V2 Manual de usuario

ADEMCO

ADEMCO 676 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario