ADC Double Pair/Line Power G.SHDSL WorldDSL G.S Manual de usuario

www.adc.com • +1-952-938-8080 • 1-800-366-3891

Spec Sheet

WorldDSL™G.S

Double Pair/Line Power

G.SHDSL for CO and Customer Premises

ADC’s WorldDSL G.S is a family of high-speed

G.shdsl access devices complying with the

ITU-T G.991.2 G.shdsl standard. These modems

are specifically designed for the diverse

telecommunication needs of global markets. Ideal

for telco and enterprise networks, WorldDSL G.S

products conform to international standards to

ensure compatibility, performance and safety

within your network environment.

The new G.shdsl modems are part of the broad

family of WorldDSL HDSL modems and share common chassis’, enclosures, management software

and accessories. They are fully G.shdsl compliant including 36/72 timeslot operation and all

required performance monitoring statistics. Both G.821 and G.826 statistics are provided for E1

ports giving users maximum flexibility. Each WorldDSL G.S modem is software-selectable as a

communication master or communication slave, so any two units can be used for a point-to-point

circuit. The modems are part of a fully managed system, interfacing with a VT100 compatible

terminal or a PC. The units can be managed via their local craft port or a central management card

installed in a CO shelf. ADC’s Stargazer, Windows or UNIX-based SNMP management software

can be used to provision the system, collect alarm and performance data, and conduct diagnostic

tests locally or from a remote management station. In any of these modes, the remote unit can be

programmed and managed through the CO, minimizing travel to the outdoor site.

Features:

• Fiber optic quality (BER 10-10)

• Single pair operation or double pair operation to

double the bandwidth or extend the reach

Single Pair – 2.304 Mbps

Double Pair – 4.608 Mbps

• Nx64K rate selectable from 64 kbps to 2.304

Mbps single pair or 64 kbps to 4.608 Mbps

double pair

• E1 and FEI (Fractional EI)

• 10/100 Ethernet bridge

• Automatic protection of TS0 and TS16 for

fractional E1 use

• Software programmable data port—V.35/V.36/RS-

530/X.21

• E1/FE1 and dataport or E1/FE1 and Ethernet port

simultaneous operation sharing the bandwidth

• Intelligent multi-range line power management

for 120, 150, and 200 VDC per EN60950

• Complete G.shdsl reach/range coverage including

line power

• Support wetting current

• One pair can be set up as 1+1 protection for the

other pair, TSP

• Two pairs can also be configured as point to

multi-point

• Auto loop crossover management

• 10/100 IEEE 802.3u, layer 2 MAC bridge, wire-

speed, auto negotiation or programmable for

10/100, full/half modes

• Centralized software download for easy upgrade

• Jitter meets G.823 requirements

12/06 • 100458AE WorldDSL™G.S

www.adc.com • +1-952-938-8080 • 1-800-366-3891

WorldDSL™G.S

Specifications

SHDSL INTERFACE

Line Code: 16 Level Trellis coded PAM

Line Data Rate: user selectable from

1-pair 192 kbps to 2.304 Mbps

2-pair 384 kbps to 4.608 Mbps

Range: (see chart on next page)

Connector: DB9F (adapters available)

Protection: ITU-T K.20 and K.21 compliant

Compliance: ITU-T G.991.2

E1 INTERFACE

Line Code: HDB3

Data Rate: 64 kbps to 2048 kbps

Operation: full or fractional

Blocking: per 64 kbps channel

Idle Code Insertion: user selectable word

Impedance: 120 Ωbalanced or 75 Ωunbalanced

Framing: structured with or without CRC-4 or unstructured

Connectors: both D15F (balanced) and BNC (unbalanced)

Timing: internal, external, G.703

Compliance: ITU-T G.703, G.704, G.706, G.821, G.823, G.826, CTR12

10/100 ETHERNET INTERFACE

802.3U

Mac bridge

Auto sensing 10/100

Half or full duplex

VLAN pass through

DATA INTERFACE

User software selectable as: V.35, V.36, RS-530, X.21

Data Rate: 64 kbps to 2304 kbps or 64 to 4608 kbps (2 pair)

Connector: D25F (adapters available)

Timing: internal, external, loop, Nx64

Compliance: Net 2

PERFORMANCE MONITORING

DSL PM: ES, SES, UAS, CV, LOSW seconds

DSL Alarms: noise margin, loop attenuation, errored seconds, loss of synch word

DSL Alarms Thresholds (user settable): noise margin, loop attenuation, errored seconds

E1: G.821 and G.826

Performance Measurements: ES, SES, UAS, BBES, ESR, SESR, BBER

E1 Alarms: LOS, LFA, RAI, RAIS

PM History: 96x15 minute increments, 7x24 hour increments for both HDSL and E1 performance. Indefinite resettable

alarm log showing first and last occurrence date and time, and number of occurrences for each alarm type

Alarm Relay: Form C relay contacts NO, NC and COM

Loopbacks: local or remote towards customer or central office

Test pattern: PRBS generator and BER meter from the customer premise or CO ends

POWER

Input Power: DC -36 to -72 VDC or AC 90 to 264VAC 47 to 63 Hz.

LINE POWER

Cover full reach for G.shdsl standard span. One pair, two pair, 120 VDC, 150 VDC, 200 VDC

CHASSIS/ENCLOSURE

Chassis: EMS-830 or EMS-832; Enclosure: ERE-811 L5, L6 or L7 single-slot enclosure

ENVIRONMENTAL

Operating Temperature: -5ºC to +50ºC; Storage Temperature: -40ºC to +85ºC

Humidity: up to 95% RH non-condensing

SAFETY/EMISSIONS COMPLIANCE

CE Marked

Safety: EN60950; Emissions, Susceptibility and Immunity: EN 300386-2. CO IN EMS-83x,

Other Locations in ERE-811 or ETU versions

12/06 • 100458AE WorldDSL™G.S

www.adc.com • +1-952-938-8080 • 1-800-366-3891

WorldDSL™G.S

Specifications and Ordering Information

Description Type Catalog Number

GS-2P-E1 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GN-XX-01

GS-2P-E1 Wide Temp Wide Temp Plug in card for EMS-830 CO chassis WD921GN-XX-02

GS-2P E1 + Serial Nx64 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GN-XX-01

GS-2P eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD920GN-1B-01

GS-2P E1 + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GN-1B-01

GS-2P E1 + Serial + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GN-1B-01

GS-2P LP E1 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GL-XX-01

GS-2P LP E1 + Serial Nx64 Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GL-XX-01

GS-2P LP eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD920GL-1B-01

GS-2P LP E1 + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GL-1B-01

GS-2P LP E1 + Serial + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GL-1B-01

Ordering Information

DSL Rate

0.4mm 0.6mm 0.8mm

With Noise1No Noise2With Noise1No Noise2With Noise1No Noise2

4608 2.2 3.8 4.4 7.6 6.3 9.3

4095 2.4 3.9 4.8 7.8 6.8 11.1

3584 2.5 4.0 5.0 8.0 7.2 11.8

3072 5.7 4.1 5.4 8.4 8.2 12.3

2560 2.9 4.3 5.8 8.6 9.0 12.8

2304 3.0 4.4 6.0 8.8 9.5 13.2

2048 3.2 4.5 6.4 9.0 10.2 13.6

1536 3.7 4.8 7.4 9.6 11.7 14.1

1280 4.0 4.9 8.0 9.8 12.7 14.7

1024 4.2 5.0 8.4 10.0 13.5 15.3

768 4.8 5.5 9.6 11.0 14.7 15.7

512 5.5 5.8 11.0 11.6 16.8 16.8

384 6.0 6.3 12.0 12.6 17.1 17.1

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080

Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101

Specifications published here are current as of the date of publication of this document. Because we are continuously

improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may

verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.

views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features

contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer

Spec Sheet

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de ADC

ADC

ADC H2TU-C-202 Instrucciones de funcionamiento originales

ADC

ADC HiGain HDU-404 LIST 2 Instrucciones de funcionamiento originales

ADC

ADC PG-PLUS PLL-722 Manual de usuario

ADC

ADC Digivance NXD Manual

ADC

ADC HiGain HMS-318 List 3 Manual de usuario

ADC

ADC PG-FLEXPLUS PMU-712 Manual de usuario

ADC

ADC HiGain HLU-200 Manual de usuario

ADC

ADC Digivance Manual de usuario

ADC

ADC HIGAIN H2TU-R-402 LIST 7G Instrucciones de funcionamiento originales

ADC

ADC FlexWave MMX 6000 Manual de usuario

ADC

ADC GPRS Support Node GGSN & SGSN WAVE.GSN Manual de usuario

ADC

ADC H2TU-C-319 List 1A Instrucciones de funcionamiento originales

ADC

ADC HiGain H2TU-C-319 List 4E Instrucciones de funcionamiento originales

ADC

ADC LoopStar 780 Manual de usuario

ADC

ADC DSX-1 Manual de usuario

ADC

ADC Baluns Series Manual de usuario

ADC

ADC HRE-425 List 1 Instrucciones de funcionamiento originales

ADC

ADC PG-FlexPlus PG-CAB001 Manual de usuario

ADC

ADC H2TU-C-388 HiGain Manual de usuario

ADC

ADC PG-FLEXPLUS PLL-735 Manual de usuario

ADC

ADC H2TU-C-202 Manual de usuario

ADC

ADC FlexWave MMX 7000 Manual de usuario

ADC

ADC DSX-1 Manual

ADC

ADC OmniReach NCX-1000s Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

Lanner

Lanner NCA-1525 Manual de usuario