Adaptec AAR-1220SA Manual de instrucciones
--------------------------------------------------------------------------------
Release notes for the AAR-1220SA SATA HostRAID dated: September 29, 2006
--------------------------------------------------------------------------------
This release notes contains the following:
1. Description of the release
2. Supported hardware
3. Supported Operating Systems
4. Major functional changes
5. Prerequisites of using the Software
6. Tested Configuration
7. Known Issues
8. Windows registry Parameters
1. Description of the Release:
---------------------------------
Date of release: September 29, 2006
This is the official software release containing the list of software components
listed in the section 3 of the release note.
2. Supported Hardware:
--------------------------
The software release supports the following hardware listed below:
a. Adaptec AAR-1220SA SATA HostRAID controller
3. Supported Operating Systems:
------------------------------------
Windows Driver 32-bit and 64-bit (AMD & EM-64T) - 1.4-0 Build 12047
- Windows 2000 Server, Advanced Server, Professional
- Windows 2003 Server, Standard, Enterprise, Web Edition, x64 Edition
- Windows XP Professional, x64 Edition
Linux Driver - 1.4-0 Build 12047
- Red Hat Enterprise Linux 3.0, IA-32 and x64
- Red Hat Enterprise Linux 4.0, IA-32 and x64
- SUSE Linux Enterprise Server 9.0, IA-32 and x64
- SUSE Linux Enterprise Server 10.0, IA-32 and x64
Netware Driver - 1.4-0 Build 12047
- Netware 6.5 SP5
3.1 Adaptec Storage Manager:
---------------------------------
Adaptec Storage Manager and HRCONF - 4.30 Build 16042
Supported OS:
- Windows IA-32 and x64
- Linux IA-32 and x64
- Netware 6.5
3.2 BIOS and DOS Tools:
----------------------------
1. Expansion ROM BIOS for 1220SA - 5.0-0 Build 2227
2. Adaptec Flash Utility (AFU.EXE) for 1220SA - 5.0-0 Build 2227
4. Major Functional changes:
--------------------------------
1. Support for Medium Error handling from the drives.
2. SATA Tape and CD ROM support.
5. Prerequisites of Using the Software:
-------------------------------------------
- BIOS and the driver should use above stated software version.
6. Tested Configuration:
---------------------------
The software was tested with the Hardware Supported list on the motherboard with
the IBM PC/AT compatible PCI-x platforms. These are the various components used
during the testing:
- IBM x86 PC/AT compatible platform with Intel Xeon
- Tested with direct attached SATA-I and SATA-II drives
- Adaptec Storage Enclosure 335SAS enclosures with SATA drives
7. Known Issues/Limitations:
--------------------------------
7.1 Windows
- All Windows
Drive Letter may disappear after Medium Error on a Simple Volume
On a simple volume with Medium error, the error is reported to the Windows OS.
All the error handling is done by the operating system. The expected behavior
is intermittent and some times drive letter disappear.
- OS Caching cause invalid data in file copy from Medium Error locations in
specific conditions
When read medium error occur in simple volume or RAID-0 or a good member of a
degraded RAID-1/RAID-10, file copy in Windows Explorer will fail the first few
times but will pass on the later attempts; however, the file gets copied has
invalid data in the section where the medium error was. This happens because of
the Windows OS caching invalid data.
7.2 Netware 6.5
- Netware 6.5 SP5
Driver Fails to load if OS is installed in onboard IDE/SATA drive
Reason: IDE Driver takes over the control by default
Work Around: Remove loading of multiple IDEATA.HAM by modifying Startup.ncf,
and reboot. (ADPml00709)
7.3 Linux
- Red Hat Enterprise Linux 4 QU3 (64-bit)
Compatibility issue with Supermicro X6DHE-G Server
Supermicro X6DHE-G Server has a problem with RHEL4 QU3/64 Bit. The system hung
when "formatting /boot file system...", and installation failed.
This issue happens even with IDE drives, and without Adaptec HostRAID
controllers present in the server. (ADPml00943)
8. Windows REGISTRY PARAMETERS:
----------------------------------------------
8.1 Driver Specific Registry Parameters
WARNING: Altering or adding these driver parameters incorrectly can render your
system inoperable. Use them with caution.
Follow the instructions below to enter registry values that affect the
configuration information for the ADP3132 driver. Note that all HostRAID
adapters supported by the installed driver are affected by the values you enter
here.
The key used for this HostRAID release is "ADP3132". To enter driver-specific
parameters, follow these steps:
1) Select Run from the Start button.
2) Type "regedt32" and press Enter.
3) Open the registry list to the following location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ADP3132
If the \Parameters\Device\ keys already exist, skip to step 6 to begin entering
parameters. If the keys do not yet exist, follow steps 4 and 5 to create them.
4) Click on the ADP3132 key. Select "New -> Key" from the Edit menu, type
"Parameters" in the "New Key #1" edit box, and press Enter.
5) Click on the Parameters key. Select the "New -> Key" from the Edit menu, type
"Device" in the "New Key #1" edit box, and press Enter. To specify a specific
host adapter, append Device with the number of the host adapter. For example,
type "Device0" for the first host adapter, "Device1" for the second, etc. If you
omit the host adapter number, the configuration information will apply to all
supported host adapters.
6) Go to the Parameters\Device key. Select "New -> String Value" from the Edit
menu, type "DriverParameters" in the "New Value #1" box, and press Enter twice.
The Edit String text box appears. Enter valid parameters in the text box. Use a
semicolon to separate multiple parameters. For example:
<Parameter1>=<Value1>;<Parameter2>=<Value2>;
MaximumSGList=17;PK=1;
NOTE: Changes made with the Registry Editor do not take effect until you reboot
your computer.
----------------------------------------------------------------
Option: Performance/Compatibility Settings
Definition: This registry option tunes the setting for performance purpose. This
registry option modifies the maximum number of I/Os and maximum number of
scatter gather elements or number of physical breaks. The setting can be set as
high or normal. When set to high it modifies the maximum I/Os to 255 and maximum
scatter gather list to 33. In this mode, system hibernation may not work. Use
the following parameter and value to modify the driver behavior.
To run driver in high performance:
Use the registry file HIGHPERF.REG.
To run driver in normal mode:
Use the registry file WHQL.REG.
Follow these steps to change the settings:
1) Select Run from the Start button.
2) Browse to the folder containing above mentioned version of the HostRAID
driver, select file "HIGHPERF.REG" or "WHQL.REG" and click OK.
NOTE: The default value for this parameter is normal mode and it supports system
hibernation.
Possible Values: Normal Mode - High Performance Mode
Default Value: Normal Mode
----------------------------------------------------------------
Option: ExposeEnclosure
Definition: This registry option changes the appearance of enclosure management
devices to the operating system. One can directly edit the registry and apply
the required changes to this option as explained in section 8.1.
There is another way to reflect expose enclosure change using the
"ENCLOSURE.REG" file. Follow these steps to change the settings:
1) Select Run from the Start button.
2) Browse to the folder containing above mentioned version of the HostRAID
driver, select file "ENCLOSURE.REG" and click OK.
Note: If you use the second option to expose enclosure, then use the
"Performance/Compatibility Settings" option to bring driver to Normal Mode using
"WHQL.REG" file.
Possible Values: 0-1 (0=do not expose enclosure, 1=expose enclosure)
Default Value: 0
----------------------------------------------------------------
8.2 Windows Specific Registry Parameters
NOTE: This setting applies to Windows Server 2003, Windows 2000, and Windows XP.
The only Windows-specific parameter that you can currently change is the
TimeOutValue. This registry option increases the timeout for all disk class
devices (in contrast to the driver-specific registry parameters that affect only
your HostRAID adapter).
The default TimeOutValue is 10 seconds. Follow these steps to increase this
value to 60 seconds:
1) Select Run from the Start button.
2) Browse to the folder containing above mentioned version of the HostRAID
driver, select the file "TIMEOUT.REG"
and click OK.
Note: Changes made with the Registry Editor do not take effect until you reboot
your computer.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
(c) 2006 Adaptec, Inc. All Rights Reserved.
This software contains the valuable trade secrets of Adaptec or its
licensors. The software is protected under international copyright
laws and treaties. This software may only be used in accordance with
the terms of its accompanying license agreement.
No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without prior
written consent of Adaptec, Inc.,
691 South Milpitas Blvd.,Milpitas, CA 95035
Otros manuales para AAR-1220SA
1
Tabla de contenidos
Otros manuales de Hardware de computadora de Adaptec
Adaptec
Adaptec ASA-7211C Manual de usuario
Adaptec
Adaptec SAS RAID Controllers Manual de usuario
Adaptec
Adaptec RAID 5405 Manual de usuario
Adaptec
Adaptec DuraStor 7200S Manual de usuario
Adaptec
Adaptec ACB-2320 Manual de usuario
Adaptec
Adaptec 2010S - SCSI RAID Storage Controller Manual de usuario
Adaptec
Adaptec 2410SA - Serial ATA RAID Controller Manual de usuario
Adaptec
Adaptec ACB-2370 Manual de usuario
Adaptec
Adaptec SATA RAID FOR ADAPTEC Manual de usuario
Adaptec
Adaptec RAID 5405Z Manual de usuario
Adaptec
Adaptec 9110G Manual de usuario
Adaptec
Adaptec DuraStor 6200S Manual de usuario
Adaptec
Adaptec AHA-1520 Manual de usuario
Adaptec
Adaptec RAID 6805Q Manual de usuario
Adaptec
Adaptec 2100S - SCSI RAID Controller Manual de usuario
Adaptec
Adaptec 2045 Manual de usuario
Adaptec
Adaptec 2100S - SCSI RAID Controller Guía de seguridad
Adaptec
Adaptec RAID 5405Z Manual de usuario
Adaptec
Adaptec 7210S Manual de uso y cuidado
Adaptec
Adaptec ACB-232XD Manual de usuario
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
