Adaptec XHub2 - Hub - USB Manual de usuario

Adaptec XHub2

Quick Start Guide

Before You Begin

To use your Adaptec

XHub2

, you need:

■A PC-compatible notebook or desktop computer with:

■A 266-MHz or faster processor

■Windows®XP or Windows 2000

■An available USB port

■One high-quality USB cable for each USB device you

wish to connect to your XHub2. (H

igh quality USB

cables are available for purchase on the Adaptec Web

site, at

www.adaptec.com/buy-cables

About USB 2.0 Performance

For your XHub2 and USB 2.0 devices to operate at USB 2.0

speeds, the XHub2 must be connected to a USB 2.0 port,

and USB 2.0 drivers with hub support must be installed on

your computer.

If your computer does not have a built-in USB 2.0 port,

Adaptec recommends connecting your XHub2 to an

Adaptec USB 2.0 adapter for the highest-quality USB 2.0

connection.

Note:

USB 1.1 devices won’t operate at USB 2.0 speeds,

even if they’re connected to a USB 2.0 hub or adapter.

Plugging in Your XHub2

Follow the picture to connect your XHub2. You don’t have

to power off your computer before connecting the hub.

You do not need to install any device drivers. When your

XHub2 is connected and your computer is powered on,

your hub is ready for use.

Unplugging Your XHub2

Your XHub2 is hot-pluggable, which means it can be

connected

and disconnected while your computer is on.

(Your USB devices

may not be hot-pluggable, however; see

Unplugging Your Devices on page 3 for more information.)

USB ports (Port 1 on top, Port 2 on bottom)

USB Device LED 1 and 2:

When a Device LED is illuminated, a device is

connected to the corresponding USB port.

USB port on notebook or desktop computer

(The location of your USB port may differ

from what’s shown in this example.)

Power LED:

When this LED is illuminated,

the XHub2 is receiving power.

Plugging in Your Devices

Follow this picture to connect your USB 1.1 and 2.0 devices

to your XHub2. You can use either USB port on your hub.

Note: USB 1.1 devices won’t operate at USB 2.0

speeds, even if they’re connected to a USB 2.0 hub or

adapter. See About USB 2.0 Performance on page 1 for

more information.

Unplugging Your Devices

Device manufacturers support hot-plugging in different

ways. Some devices (like CD-ROM drives) must be

stopped before they are unplugged. Refer to your devices’

documentation for disconnection recommendations.

may be reproduced, stored in a retrieval system, or transmitted in

any form or by any means, electronic, mechanical, photocopying,

recording or otherwise, without the prior written consent of

Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.

Trademarks

XHub, Adaptec, and the Adaptec logo are trademarks of Adaptec,

Inc., which may be registered in some jurisdictions.

Windows 2000 and Windows XP are trademarks of Microsoft

Corporation in the US and other countries, used under license.

All other trademarks are the property of their respective owners.

Changes

The material in this document is for information only and is subject

to change without notice. While reasonable efforts have been made

in the preparation of this document to assure its accuracy, Adaptec,

Inc. assumes no liability resulting from errors or omissions in this

document, or from the use of the information contained herein.

Adaptec reserves the right to make changes in the product design

without reservation and without notification to its users.

Disclaimer

THIS

PRODUCT

DIRECTS

YOU

COPY

MATERIALS

YOU

MUST

HAVE

PERMISSION

FROM

THE

OWNER

THE

MATERIALS

AVOID

VIOLATING

THE

LAW

WHICH

COULD

RESULT

DAMAGES

OTHER

REMEDIES

Adaptec Customer Support

If you have questions about installing or using your Adaptec

product, check this document first—you will find answers to most

of your questions here. If you need further assistance, use the

support options listed below.

Technical Support Identification (TSID) Number

■

Before contacting Technical Support, you need your unique 12-

digit TSID number. The TSID number identifies your product

and support status.

■The TSID number is included on two white, bar-coded labels,

like the example below.

Support Options

■Search the Adaptec Support Knowledgebase (ASK) at

ask.adaptec.com for articles, troubleshooting tips, and

frequently asked questions for your product.

■For support via Email, submit your question to Adaptec's

Technical Support Specialists at ask.adaptec.com.

■To order Adaptec products, including accessories and cables,

call +1 408-957-7274. Or, you can order cables online at

www.adaptec.com/buy-cables.

Europe

■Visit our Web site at www.adaptec-europe.com.

■German and English: Search the Adaptec Support

Knowledgebase (ASK) at ask-de.adaptec.com for articles,

troubleshooting tips, and frequently asked questions for your

product.

For support via e-mail, submit your question to Adaptec's

Technical Support Specialists at ask-de.adaptec.com.

■French: Search the Adaptec Support Knowledgebase (ASK) at

ask-fr.adaptec.com for articles, troubleshooting tips, and

frequently asked questions for your product.

For support via e-mail, submit your question to Adaptec's

Technical Support Specialists at ask-fr.adaptec.com.

■To order Adaptec products, including accessories and cables,

go to www.adaptec.com/buy-cables.

Japan

■Search the Adaptec Support Knowledgebase (ASK) at

ask.adaptec.co.jp

■Visit our Web site at www.adaptec.co.jp.

Limited 2-Year Hardware Warranty

1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product

that it will be free from defects in material and workmanship for a

period of two (2) years from the date of purchase. If the product should

become defective within the warranty period, Adaptec, at its option,

will repair or replace the product, or refund the purchaser’s purchase

price for the product, provided it is delivered at the purchaser’s

expense to an authorized Adaptec service facility or to Adaptec.

2. Repair or replacement parts or products will be furnished on an

exchange basis and will either be new or reconditioned. All replaced

parts or products shall become the property of Adaptec. This warranty

shall not apply if the product has been damaged by accident, misuse,

abuse or as a result of unauthorized service or parts.

3. Warranty service is available to the purchaser by delivering the product

during the warranty period to an authorized Adaptec service facility or

to Adaptec and providing proof of purchase price and date. The

purchaser shall bear all shipping, packing and insurance costs and all

other costs, excluding labor and parts, necessary to effectuate repair,

replacement or refund under this warranty.

4. For more information on how to obtain warranty service, write or

telephone Adaptec at 691 South Milpitas Boulevard, Milpitas, CA

95035, (800) 959-7274.

5. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY

PRODUCT WHICH HAS BEEN DAMAGED AS A RESULT OF

ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF

UNAUTHORIZED SERVICE OR PARTS.

6. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS

WARRANTIES WHICH NOW OR HEREAFTER MIGHT OTHERWISE

ARISE RESPECT TO THIS PRODUCT. IMPLIED WARRANTIES,

INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL (A)

HAVE NO GREATER DURATION THAN 2 YEARS FROM THE DATE

OF PURCHASE, (B) TERMINATE AUTOMATICALLY AT THE

EXPIRATION OF SUCH PERIOD AND (C) TO THE EXTENT

PERMITTED BY LAW BE EXCLUDED. IN THE EVENT THIS

PRODUCT BECOMES DEFECTIVE DURING THE WARRANTY

PERIOD, THE PURCHASER’S EXCLUSIVE REMEDY SHALL BE

REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE.

INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING

WITHOUT LIMITATION LOSS OF DATA, ARISING FROM BREACH

OF ANY EXPRESS OR IMPLIED WARRANTY ARE NOT THE

RESPONSIBILITY OF ADAPTEC AND, TO THE EXTENT

PERMITTED BY LAW, ARE HEREBY EXCLUDED BOTH FOR

PROPERTY DAMAGE, AND TO THE EXTENT NOT

UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE.

7. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

CONSUMER PRODUCTS, AND SOME STATES DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,

SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY

TO YOU.

8. This warranty gives you specific legal rights, and you may also have

other rights which vary from state to state.

Regulatory Compliance Statements

Federal Communications Commission Radio Frequency Interference

Statement

WARNING: Changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate

radio frequency energy, and if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. However, if this equipment does cause

interference to radio or television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between equipment and receiver.

■Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

■Consult the dealer or an experienced radio/television technician for

help.

■Use a shielded and properly grounded I/O cable and power cable to

ensure compliance of this unit to the specified limits of the rules.

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Tabla de contenidos

Otros manuales de Adaptador de Adaptec

Adaptec

Adaptec ULTRA160 Manual de usuario

Adaptec

Adaptec AHA-3980 Manual de usuario

Adaptec

Adaptec 29320A Manual de usuario

Adaptec

Adaptec AHA-1540C Manual de usuario

Adaptec

Adaptec 81605ZQ Manual de usuario

Adaptec

Adaptec SLIMSCSI 1460 Manual de usuario

Adaptec

Adaptec PC/104 Manual de usuario

Adaptec

Adaptec 131CA - AAA RAID Controller Instrucciones de montaje

Adaptec

Adaptec SlimSCSI APA-460 Manual

Adaptec

Adaptec ASA-7211C/F Manual de usuario

Adaptec

Adaptec AHA-1510A Series Manual de usuario

Adaptec

Adaptec AUA-2000 Manual de usuario

Adaptec

Adaptec Trantor T160 Manual

Adaptec

Adaptec 1220SA - RAID Controller Manual de usuario

Adaptec

Adaptec SlimSCSI APA-1460A Manual de usuario

Adaptec

Adaptec DuoConnect AUA-3121 Manual de usuario

Adaptec

Adaptec USBXchange Manual de usuario

Adaptec

Adaptec SlimSCSI APA-1460A Manual de usuario

Adaptec

Adaptec Serial Attached SCSI Manual de usuario

Adaptec

Adaptec ANA-6910/FX SC Manual de usuario

Adaptec

Adaptec ASH-1205SA Manual de usuario

Adaptec

Adaptec 9210LP Manual de usuario

Adaptec

Adaptec RCM-FC2500 Manual de usuario

Adaptec

Adaptec 29320ALP Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario