ACTi PMON-1001 Manual de usuario

Camera Installation Kit PMON-1001

Quick Installation Guide

~ 1~

I. Package contents

．Camera Installation Kit PMON-1001 ．Belt Bag

．Rechargeable Battery ．Charger

．Quick Installation Guide ．Antenna

II. Additionally required equipment

．Apple iPhone or iPod Touch with iOS5 or newer ．Ethernet cable (1.5 m / 5 ft)

III. Concept of usage

Camera Installation Kit PMON-1001 is a light on-the-belt

hardware utility that connects to the IP camera and

provides PoE power through a short network cable while

providing wireless network access for iPhone or iPod Touch

that has a free downloaded app "CameraGo!" installed.

With the help of this installation kit it is possible to do convenient and time-saving viewing

angle and focus adjustment of ACTi cameras without needing to bring a notebook computer

up on the ladder with the long cable attached or ask someone on the ground for assistance.

IV. Preparing the Camera Installation Kit

1. Screw in the antenna and lock it by [Lock] button.

2. Insert fully charged battery into the kit.

3. Put the kit into the belt bag.

4. Turn on the power (PWR and RDY LEDs will turn on).

~ 2~

V. Preparing the application software for Apple device

Download CameraGo! free app from Apple’s App Store and install to the Apple device.

VI. Using the whole solution

VII.Warranty

PMON-1001 and Charger –1 year

Battery –6 months

More info: http://www.acti.com/support/warranty/

VIII. Additional information

Manuals: www.acti.com/product/

Knowledge Base Articles: www.acti.com/kb/

Online Customer Help Desk: www.acti.com/chd/

1. Connect PMON-1001 to the IP camera by Ethernet cable. ENET LED will

turn on and blink during data transmission. When the camera boot up is

complete, PMON-1001 will activate Wi-Fi network named “Camera_Helper”

and the Wi-Fi indication LEDs of PMON-1001 will start to flash forth and back.

Then use Apple device to connect to that wireless

network (password: 12345678).

2. Launch CameraGo! app.

3. CameraGo! will detect the IP camera.

Press [OK] to connect to live view.

4. Use live view to adjust the viewing angle

and focus of the IP camera. When

installing a zoom camera with auto focus,

you can also use [+] and [-] zoom buttons

and [Re-Focus] button if necessary.

5. When the camera adjustment is done, unplug the network cable from

camera and plug in to the next camera. Updated “Camera_Helper”network

will pop-up that matches with the network segment of the next camera.

Select it and repeat from step 3.

Tabla de contenidos

Otros manuales de Cámara de seguridad de ACTi

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario