Acromag VPX4812 Manual de usuario

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

VPX4812/4814

Single-Slot 3U VPX Bus

XMC Carrier Card with P16 Support

VPX Switch Card

USER’S MANUAL

ACROMAG INCORPORATED

30765 South Wixom Road

Wixom, MI 48393-2417 U.S.A.

Tel: (248) 295-0310

Data and specifications are subject to change without notice.

8501022D

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

The information contained in this manual is subject to change without notice. Acromag, Inc. makes no

warranty of any kind with regard to this material, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Further, Acromag, Inc. assumes no responsibility

for any errors that may appear in this manual and makes no commitment to update, or keep current,

the information contained in this manual.

No part of this manual may be copied or reproduced in any form, without the prior written consent of

Acromag, Inc.

IMPORTANT SAFETY CONSIDERATIONS

It is very important for the user to consider the possible adverse effects of power, wiring, component,

sensor, or software failures in designing any type of control or monitoring system. This is especially

important where economic property loss or human life is involved. It is important that the user

employ satisfactory overall system design. It is agreed between the Buyer and Acromag, that this is

the Buyer's responsibility.

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

1.0 General Information ........................................................................................................................5

Key Features.....................................................................................................................................5

Introduction .....................................................................................................................................6

Module and Backplane Profiles .......................................................................................................6

Build Levels ......................................................................................................................................7

2.0 Ordering Information.......................................................................................................................8

3.0 Preparation For Use.........................................................................................................................9

Unpacking and Inspection................................................................................................................9

4.0 Operational Block Diagram............................................................................................................10

5.0 Board Layout..................................................................................................................................11

6.0 Connectors.....................................................................................................................................12

P0 Connector .................................................................................................................................12

P1 Connector .................................................................................................................................12

P2 Connector .................................................................................................................................13

J15 Connector ................................................................................................................................13

J16 Connector ................................................................................................................................14

J5 Connector –JTAG Header..........................................................................................................14

7.0 Switch Settings...............................................................................................................................15

Front Panel Layout.........................................................................................................................17

8.0 Handling.........................................................................................................................................18

ESD Safe Work Area Guidelines .....................................................................................................18

9.0 Installation .....................................................................................................................................19

Board Keying ..................................................................................................................................19

Installation Notes...........................................................................................................................19

10.0 Specifications .................................................................................................................................20

Physical ..........................................................................................................................................20

Front Panel.....................................................................................................................................20

Power Requirements .....................................................................................................................20

Power Consumption ......................................................................................................................20

Auxiliary Supply..............................................................................................................................21

Power-Up/Reset Sequence............................................................................................................21

Bus Compliance..............................................................................................................................21

Form Factor....................................................................................................................................21

Flammability ..................................................................................................................................21

Environmental................................................................................................................................22

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

EMI/EMC Regulatory Compliance..................................................................................................23

11.0 Service and Repair .........................................................................................................................24

Service and Repair Assistance........................................................................................................24

Preliminary Service Procedure.......................................................................................................24

Where to Get Help.........................................................................................................................24

Appendix A –Accessory Modules...............................................................................................................25

TRANS-V112...................................................................................................................................25

Certificate of Volatility ................................................................................................................................29

Revision History ..........................................................................................................................................30

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

1.0 General Information

The VPX4812 is an XMC Carrier Card Module in the 3U VPX form factor, targeted for processing,

communications, and display applications in the commercial, military, and aerospace markets.

The VPX4812 provides support for Rear I/O connections from the XMC P16 connector. The

TRANS-V112 is the Rear Transition Module for the VPX4812 used to bring out Rear I/O

connections through the backplane.

The VPX4812 supports up to four VPX Fat Pipe (x4) connections to other cards in the system at

Gen 2.0 speeds. The VPX4812 can be used as a switch card allowing an upstream Fat Pipe or

Double Fan Pipe connection –typically to a CPU –to communicate with up to three downstream

Fat Pipe connections or a single Double Fat Pipe connection.

The VPX4812 also provides support for a VPX Double Fat Pipe (x8) connection to an XMC card at

Gen 2.0 speeds.

The VPX4814 disconnects the PCIe connection to the third downstream card allowing it to be

used in systems with an Ethernet control plane interface. This provides the VPX4814 with the

ability to be used as an XMC Carrier Card in the majority of the standard OpenVPX profiles.

Key Features

•24-Channel 5-Port PCI Express Gen. 2.0 Switch

•The XMC site is PCIe 8-Lanes Gen. 2.0

•Module conforms to VPX Spec. VITA 46.0, 46.4, and 46.9

•The XMC site supports X24s+X8d+X12d I/O mapping (VITA

46.9)

•16 Lanes PCI Express to backplane (VITA 46.0 and 46.4)

•Supports Non-Transparent Bridging Applications

•3U VPX form factor supporting OpenVPX/VITA 65

•Air and conduction cooled variants available

•REDI covers supporting VITA 48 available

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

Introduction

The VPX4812 has two primary functions that can be utilized in a VPX system simultaneously.

1. XMC Carrier Card –The VPX4812 supports a Double Fat Pipe (x8) connection from an

XMC module to the on-board PCIe switch. The voltage used to power the XMC module

can be toggled between 5V or 12V using a DIP switch located on the VPX4812.

2. VPX Switch Card –The VPX4812 contains a 24-lane 5-port PCIe switch capable of Gen

2.0 speeds. When utilizing the VPX4812 as a switch card, a CPU module configured to be

an upstream port can communicate with up to three downstream VPX cards in the

system as well as an XMC module on the 4812.

The VPX4812 supports the use of non-transparent bridging using the on-board PCIe switch. By

utilizing non-transparent bridging (NTB), the VPX4812 can be used to implement multi-hosted

topologies including intelligent adapter cards, dual-host systems with redundancy, and even

blade server systems.

Module and Backplane Profiles

The VPX4812 conforms to OpenVPX switch module profile MOD3-SWH-4F-16.4.5-2. This switch

profile is intended to be used in the OpenVPX backplane profile BKP3-CEN06-15.2.12-n shown

below.

Figure 1: OpenVPX Backplane Profile BKP3-CEN06-15.2.12-n

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

The VPX4812 also conforms to OpenVPX peripheral module profile MOD3-PER-1F-14.3.2 when

used as an XMC carrier card. Typically, this peripheral profile can be used in a wide range of

OpenVPX backplane profiles but due to the PCIe switch connections on P1, the VPX4812 may be

incompatible with profiles that contain other plane interfaces on P1. Check the VPX connector

pinout in this manual against the intended backplane topology to ensure compatibility.

The VPX4814 disconnects the lower PCIe lanes on P1 while retaining all of the XMC carrier card

functionality of the VPX4812. This allows it to be used as an XMC carrier card in a wider range of

OpenVPX backplane profiles including profiles that contain Ethernet control plane interfaces on

P1.

Build Levels

The VPX4812/14 is available in three electrically compatible build levels, each of which is

carefully tailored to a particular set of requirements and environments. All three levels fully

support the power and versatility of VPX, so no matter how large or diversified your project,

absolute compatibility is assured at all stages of development. The three build levels have three

basic mechanical configurations, both in accordance with the VITA 46.0 VPX standard and the

VITA 48 REDI standard:

1. Air (convection) cooled modules are intended for use in standard industrial chassis.

2. Conduction-cooled modules are intended for use in sealed Air Transportable Racking

(ATR) and other conduction-cooled environments.

3. REDI cover, Conduction-cooled modules are intended for use in sealed Air Transportable

Racking (ATR) and other conduction-cooled environments.

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

2.0 Ordering Information

Available Models

VPX4812-LF

VPX4812 Air-cooled Model

VPX4812-CC-LF

VPX4812 Conduction-cooled Model

VPX4812-REDI-LF

VPX4812 REDI Model

VPX4814-LF

VPX4814 Air-cooled Model

VPX4814-CC-LF

VPX4814 Conduction-cooled Model

VPX4814-REDI-LF

VPX4814 REDI Model

VPX4812/4814 User’s Manual Single-Slot 3U VPX Bus XMC Carrier Card/Switch Card Module

Acromag, Inc. Tel: 248-295-0310 -

- www.acromag.com

3.0 Preparation For Use

Unpacking and Inspection

Upon receipt of this product, inspect the shipping carton for evidence

of mishandling during transit. If the shipping carton is badly

damaged or water stained, request that the carrier's agent be present

when the carton is opened.

If the carrier's agent is absent when the carton is opened, and the

contents of the carton are damaged, keep the carton and packing

material for the agent's inspection.

For repairs to a product damaged in shipment, refer to the Acromag

Service Policy to obtain return instructions. It is suggested that

salvageable shipping cartons and packing material be saved for future

use in the event the product must be shipped.

This board is physically protected with packing material and

electrically protected with an anti-static bag during shipment. It is

recommended that the board be visually inspected for evidence of

mishandling prior to applying power.

The board utilizes static sensitive components and should only be

handled at a static-safe workstation.

IMPORTANT: Adequate air circulation must be provided to prevent a temperature rise above the

maximum operating temperature.

Adequate air circulation must be provided to prevent a temperature rise above the maximum

operating temperature and to prolong the life of the electronics.

If the installation is in an industrial environment and the board is exposed to environmental air,

careful consideration should be given to air-filtering.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa portadora de Acromag

Acromag

Acromag ACPC4610E/CC Manual de usuario

Acromag

Acromag AVME9630 Series Manual de usuario

Acromag

Acromag VPX4812A Manual de usuario

Acromag

Acromag AVME9675 Series Manual de usuario

Acromag

Acromag XMCAP2022 Manual de usuario

Acromag

Acromag APC8620 Series Manual de usuario

Acromag

Acromag ACEX4041 Manual de usuario

Acromag

Acromag AVME9675A Series Manual de usuario

Manuales populares de Placa portadora de otras marcas

CTJ

CTJ TX2 Manual de usuario

Amfeltec

Amfeltec AngelShark Series Manual de usuario

Advantech

Advantech CPC-2420 Manual de instalación y operación

Bob's Space Racers

Bob's Space Racers BSR-3000 Manual de usuario

RTimes

RTimes Z509 Manual de usuario

mikroElektronika

mikroElektronika Clicker 2 Manual de usuario

Connect Tech

Connect Tech Sprocket Carrier Manual de usuario

ETAS

ETAS ES5372.1-B Manual de usuario

TQ-Systems

TQ-Systems MBa7x Manual de usuario

Arbor Technology

Arbor Technology PBE-1101 Manual de usuario

Aetina

Aetina AN310 Manual de usuario

RTimes

RTimes Z603L/LE Manual de usuario

Hemisphere GPS

Hemisphere GPS SBX-4 Instrucciones de montaje

REDEKOP

REDEKOP Actuated Tailboard Manual de usuario

XJTAG

XJTAG SPEA 3030 Manual de usuario

Exor

Exor GigaSOM gS01 Manual de usuario

Aaeon

Aaeon ECB-920A-A11 Manual de usuario

ESD

ESD PCIe-XPIMC-Carrier Manual de usuario