ACME BOOTES Manual de usuario

- 1 -

CONTENTS

01/ Safety Instructions.................................................................................................. 2

02/ Technical Specifications ........................................................................................ 4

03/ Control Panel........................................................................................................... 6

04/ Fixture Installation.................................................................................................. 7

05/ Effect Wheels & Lamp ........................................................................................... 9

5.1 Effect Wheels................................................................................................... 9

5.2 Light Source...................................................................................................... 9

5.3 Lamp Replacement........................................................................................ 10

5.4 Lamp Replacement Warning .......................................................................12

06/ How To Set The Unit............................................................................................12

6.1 Main Functions ..............................................................................................12

6.2 Home Position Adjustment ......................................................................... 24

07/ Control By Universal DMX Controller.............................................................. 27

7.1 DMX512 Connection................................................................................... 27

7.2 Address Setting.............................................................................................. 28

7.3 DMX512 Configuration............................................................................... 28

08/ Error Information .................................................................................................. 33

09/ Troubleshooting ....................................................................................................39

10/ Fixture Cleaning....................................................................................................40

- 2 -

01/ Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer

will not accept liability for any resulting defects or problems.

Unpack and check carefully to ensure that there is no transportation damage before

using the unit.

This product is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of

head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from

adjacent surfaces.

Be sure that no ventilation slots is blocked, otherwise the unit will be overheated.

Before operation, ensure that you are connecting this product to the proper voltage in

accordance with the specifications in this manual or on the product’s specification label.

It’s important to ground the yellow/green conductor to earth in order to avoid electric

shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃. Do

not operate this product at a lower or higher temperature.

DO NOT connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does

not necessarily mean that the device is defective, and it will decrease gradually within 15

minutes.

Keep flammable materials away from the fixture while operating to avoid fire hazard.

Make sure the power cord is not crimped or damaged; replace it immediately if damaged.

Please read the instruction carefully which includes important information

about the installation, usage and maintenance.

- 3 -

Unit’s surface temperature may reach up to 70 ℃. DO NOT touch the housing

bare-handed during its operation.

Avoid any flammable liquids, water or metal from entering the unit. Once it happens, cut

off the mains power immediately.

DO NOT operate in a dirty or dusty environment. DO clean the fixture regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid entanglement of the power cord with other wires.

The minimum distance to objects/surface must be more than 12 meters.

Disconnect mains power before fuse/lamp replacement or servicing.

Replace fuse/lamp only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly

damaged.

DO NOT open the housing as there are no user serviceable parts inside.

DO NOT attempt to operate this unit if it becomes damaged. DO NOT attempt any

repairs yourself. Repairs carried out by unskilled people can lead to damage or

malfunction. Please contact the nearest authorized technical assistance center if needed.

Disconnect this product from its power source before servicing.

DO use the original packaging if the device is to be transported.

Hot lamp explosion hazard. DO NOT open the unit within 15 minutes after switching off.

DO replace the bulb once it is damaged, deformed or life-expired.

Avoid direct eye exposure to the light source while the product is on.

Never touch bulb with bare fingers, as it is very hot after using.

DO NOT operate this product if you see damage on the housing, shields, or cables. Have

the damaged parts replaced by an authorized technician at once.

- 4 -

02/ Technical Specifications

Power Voltage

180-240V~ 50/60Hz

Power Consumption

485W

Light Source

PHILIPS MSD Silver 380W

Color Temperature

7800K

Beam Angle

2°

Dimmer/Strobe

0-100% smooth dimming; outstanding strobe effect with variable

speed

Color Wheel

14 fixed colors plus white, with rainbow effect

Gobo Wheel

Static Gobo Wheel

13 gobos plus open

Movement

Pan

540°

Tilt

244°

Pan/Tilt Resolution

16 bit

Automatic pan/tilt position correction

Control

DMX Channel

19/14 Channels

Control Mode

DMX512

RDM

Firmware Upgrade

Firmware Upgrade via DMX link

Construction

Display

LCD display

Data In/Out

3-pin XLR (5-pin XLR is optional)

Power In/Out

Power Connector in/out

Protection Rating

IP20

Features

Motorized focus

Independent frost effect

2 x prisms: 8-facet prism + 24-facet prism, capable of bidirectional

rotation and superposition

2 x soft filters provide soft and even light beam

Dimensions

350x253x565mm

13.8"x10"x22.2"in

Weight

19.1kgs

42.1lbs

- 5 -

Photometric Diagram:

- 6 -

03/ Control Panel

1. Display

To show the various menus and the selected function

2. Buttons

To enter into move backward or leave the menu

UP

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

3. DMX IN

For DMX512 link, use 3-pin XLR cable to link the unit and DMX

controller to input DMX signal (5-pin XLR cable is optional)

4. DMX OUT

For DMX512 link, use 3-pin XLR cable to link the next units to

output DMX signal (5-pin XLR cable is optional)

5. POWERCON IN

To connect to supply power

6. POWERCON OUT

To connect to the next fixture

7. FUSE(T 10A)

Protects the unit from damage of over-voltage or short circuit

- 7 -

04/ Fixture Installation

DO install and operate by qualified operator. Fixture(s) should be installed in areas

outside walking paths, seating areas, or away from areas were unauthorized personnel

might reach the fixture by hand. NEVER stand directly below the fixture(s) when rigging,

removing or servicing.

Always ensure that the unit is firmly fixed to avoid vibration and slipping off during

operation. Ensure that the trussing or area of installation must be able to hold 10 times

the weight without any deformation. Always attach a safety cable that can hold at least

12 times the weight of the fixture whenever installing this fixture in a suspended

environment to ensure that the fixture will not fall if the clamp fails.

This fixture is fully operational in three different mounting positions: hanging

upside-down, mounted sideways on trussing, or set on a flat level surface. Always use

and install the supplied safety cable as a safety measure to prevent accidental damage

and/or injury in the event the clamp fails.

- 8 -

Steps for installing the omega brackets to the fixture:

- 9 -

05/ Effect Wheels & Lamp

5.1 Effect Wheels

5.2 Light Source

PHILIPS MSD Silver 380W

Because of its high internal pressure, there might be a risk that the discharge lamp would

explode during operation. The lamp emits intense UV radiation which is harmful to the eyes

and skin. The high luminance of the arc can cause severe damage to the retina if you take a

close look at the lamp.

To protect the lamp, always turn off the lamp first (via control panel or DMX controller)

and let the unit run at least five minutes to cool down before switching off the mains

supply. Never handle the lamp or luminary when it is hot.

Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured

alcohol and wipe it with a lint free cloth before installation.

The lamp generates UV radiation. Never operate the lamp without appropriate shielding.

When lighting up, the lamp operates at high pressure and there is a slight risk of arc tube

rupture. The risk increases with age, temperature and improper handling of the lamp. Do

not use the lamp longer than its lifespan.

Make sure the lamp is located in the center of the reflector for the best projection.

DANGER!

Install the color wheel / gobo wheel with the device switched off only.

Unplug from mains before changing the color wheel / gobo wheel!

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de ACME

ACME

ACME LED-0408 Manual de usuario

ACME

ACME Stage Par 220MP-220 Manual de usuario

ACME

ACME LED-212RGB Manual de usuario

ACME

ACME BRIGHT Manual de usuario

ACME

ACME ENERGY HYBRID X-400 BSW Manual de usuario

ACME

ACME LED-245/2 Manual de usuario

ACME

ACME LED-HC101 II Manual de usuario

ACME

ACME HYGIEA Manual de usuario

ACME

ACME LP-1600 BD30 Manual de usuario

ACME

ACME Dragon Scan 50 LED-SC50B Manual de usuario

ACME

ACME Theatre Spot 150m Manual de usuario

ACME

ACME Whack Manual de usuario

ACME

ACME Uploader II Manual de usuario

ACME

ACME GLAMOUR 700Z RGBY Manual de usuario

ACME

ACME LED Move 600SE Manual de usuario

ACME

ACME Spartan Hybrid C Manual de usuario

ACME

ACME XP-280 BS Manual de usuario

ACME

ACME XP-280 BS Manual de usuario

ACME

ACME IL-2420 II Manual de usuario

ACME

ACME BTDG40 Manual de usuario

ACME

ACME Solar Flare Manual de usuario

ACME

ACME ENERGY SPOT XA-400 SPOT Manual de usuario

ACME

ACME LED-PS10 Manual de usuario

ACME

ACME LED-747-1W Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario