Accton Technology CheetaHub Power-3004E Manual de usuario

CheetaHub Power-3004E

Quick Installation Guide

CheetaHub Power-3004E

Introduction

Accton’s CheetaHub Power-3004E is a compact dual-speed

hub featuring 4 10BASE-T/100BASE-TX auto-sensing ports.

This hub is completely plug and play, there is no configuration

necessary. Also, the hub comes with its own versatile hub

stand and can be mounted anywhere, so it’s ideal for small

workgroups.

The components of the CheetaHub Power-3004E are shown

in the figure below:

Check the Package

The CheetaHub Power-3004E includes:

1 EH3004E-TX 1 appropriate AC Power Adapter

1 hub stand 1 registration card (please return)

1 user guide

Quick Installation Guide

Side Panel RJ-45 Connectors

Accton’s CheetaHub Power-3004E features 4 10BASE-T/

100BASE-TX ports with RJ-45 connectors located on the side

panel of the hub. Port 1-4 are MDI-X, with a built-in wiring

crossover that allows for the use of straight-through twisted-

pair cable for connections to devices without built-in crossover

ports (i.e., workstations, printers, etc.).

Port 4 on this hub doubles as a crossover port and a straight-

through Uplink (daisy-chain) port. The MDI Uplink port makes

it convenient to connect straight-through cable from the hub to

a crossover port on another device.

Mount the Hub

The CheetaHub Power-3004E with its flexible stand can be

mounted on any flat or vertical

surface.

To mount the hub on a flat surface:

1 Slide the stand onto the hub base

(to stand upright) or back (to lay

flat).

2 Place the hub on any convenient

flat surface, such as a desktop or nearby shelf.

To mount the hub on a vertical surface:

1 First secure the stand to the

desired location, such as a

wall or side of a desk. You

may use two small screws,

Velcro™ strips, or any other

technique.

2 With the stand secured, slide the hub’s back

onto the stand.

Connect PCs to the Hub

Connect each PC to an RJ-45 port

on the hub with a straight-through

twisted-pair cable, maximum

100 meters (328 ft.). The

CheetaHub Power-3004E

will support up to 4 PCs.

Note that if you are using

port 4, be sure not to use

the Uplink port.

CheetaHub Power-3004E

Cascade Devices to the Hub

If you need more ports, connect a crossover port on another

device to the Uplink port on the hub with straight-through

twisted-pair cable, maximum 5 meters (16.4 ft.). Note that if

you are using the Uplink port you cannot use the fixed

crossover port on port 4.

1. Prepare staight-through

Category 5 twisted-pair

cable with RJ-45 plugs.

Make sure the cable does

not exceed 5 eters (16.4

feet).

2. Connect one end of the

cable to the hubs uplink

port. When using the Uplink

Port be sure not to use Port 4.

3. Connect the other end of the cable to an MDI-X RJ-45 port

on the other device (not an MDI port).

 Alternatively, you can connect fro any MDI-X port on the

hub to an MDI daisy-chain port on the other device.

 You ay also attach to MDI-X ports at both ends if you

use crossover cabling.

 When connecting to another 100Mbps Fast Ethernet

hub, the nu ber of cascaded hubs is li ited to two, and

the total network span allowed is only 205 eters (672

feet).

Verify System Operation

Check each connection by viewing the port status indicators

shown in the following table. The hub monitors the link status

for each port. If the Port indicator fails to light when you

connect a device to the hub, follow the troubleshooting advice

detailed in the next section.

Port and Hub Status LEDs

LEDs Condition Status

Power Green Hub is receiving power.

Collision 100 Flashing

green

Indicates that a packet collision has been

detected on the 100Mbps segment.

Collision 10 Flashing

green

Indicates that a packet collision has been

detected on the 10Mbps segment.

Port 1 ~ 4 Green Port has established a valid 100Mbps

network connection.

Yellow Port has established a valid 10Mbps

network connection.

Flashing Traffic is traversing the port.

Memory Error Yellow Indicates the hub has failed its power-on

self test. If this occurs, contact your Accton

dealer for assistance.

Quick Installation Guide

Troubleshooting

Sy pto : Power LED does not light after power on.

Cause: Power outlet or power cord ay be defective.

Solution: 1. Check for loose connections.

2. Check the power outlet by using it for another

device.

3. Replace the power cord.

Sy pto : Port LED does not light after connection is ade.

Cause: Hub port, network card or cable ay be

defective.

Solution: 1. Check that the hub and attached device are

both powered on.

2. Be sure the network cable is connected to both

devices.

3. Verify that Category 5 cable is used for

100Mbps connections and Category 3 or

greater for 10Mbps connections. Also verify

that the axi u cable length does not exceed

5 eters (16.4 feet) when connecting to a

100Mbps hub, or 100 eters (328 feet) when

connecting to any other device.

4. Check the network card and cable connections

for defects.

5. Replace the defective card or cable if

necessary.

Application Diagram

CheetaHub Power-3004E

Specifications

Standards Conformance IEEE 802.3, IEEE 802.3u, ISO/IEC 8802-3

Number of Ports 4 R -45 ports

Ports 1-3: Twisted-pair, fixed crossover

Port 4: Twisted-pair, choice between fixed

crossover or straight-through (daisy-chain

port)

Network Interface R -45: 100 ohm, UTP cable

10BASE-T: Categories 3, 4, or 5

100BASE-TX: Category 5

Switching Method Store-and-forward

MAC Address Table 1.7K entries per system

Memory Buffer 240 Kbytes per system

Filtering Rate Full line speed

Forwarding Rate Full line speed

Learning Rate Full line speed

Dimensions 130 x 95 x 40 mm (5.1 x 3.7 x 1.6 in)

Weight 0.3 kg (1.76 lbs)

Input Power 9 to 12 VDC, 1A (from external power adapter)

Power Consumption 6.3 Watts

Heat Dissipation 21.5 BTU/hr

Maximum Current 1.0A @ 9 VDC

Access Method CSMA/CD, 10 Mbps or 100 Mbps

Status LEDs Power (green), Collision 100 (green),

Collision 10 (green), Link (10Mbps - yellow;

100Mbps - green)/Activity (flashing), Memory

Error (yellow)

Environmental

Temperature 0° - 50°C / 32° - 122°F (Standard Operating)

-40° - 70°C / -40° - 158°F (Storage)

Humidity 5 - 95% (Noncondensing)

Certification CE Mark

Emissions FCC Class B, VCCI Class B,

EN55022 (CISPR 22)

Class B, C-Tick - AS/NZS 3548 (1995)

Class B,

IEC 1000-4-2/3/4

Safety CSA/NRTL (C22.2.950, UL 1950), TÜV/GS

(EN60950), IEC60950 (CB Report)

Quick Installation Guide

Certification

FCC Class B Certification

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following conditions

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

Warning This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures

 Reorient or relocate the receiving antenna

 Increase the separation between the equipment and receiver

 Connect the equipment into an outlet on a circuit different

from the one which the receiver is connected to

 Consult the dealer or an experienced radio/TV technician for

help

You are cautioned that changes or modifications not expressly

approved by the party responsible for compliance could void

your authority to operate the equipment.

Note: In order to maintain compliance with the limits of a

Class B digital device, Accton requires that you use a quality

interface cable when connecting to this device. Changes or

modifications not expressly approved by Accton could void your

authority to operate this equipment. Suggested cable type is

unshielded or shielded (UTP/STP) cable  Category 3 or

greater for 10Mbps connections, and Category 5 for 100Mbps

connections.

Class B (Canada Department of Communications)

This digital apparatus does not exceed the Class B limits for

radio noise emissions from digital apparatus as set out in the

interference-causing equipment standard entitled "Digital

Apparatus", ICES-003 of the Department of Communications.

Cet appareil numérique respecte les limites de bruits

radioélectriques applicables aux appareils numériques de

Classe B prescrites dans la norme sur le matériel brouilleur

"Appareils Numérques", NMB-003 édictée par le ministère des

Communications.

CheetaHub Power-3004E

VCCI Class B Compliance (Japan)

CE Mark Declaration of Conformance (for EMI

and Safety - Europe)

This is to certify that this product complies with ISO/IEC Guide

22 and EN45014. It conforms to the following specifications

EMC EN55022(1988)/CISPR-22(1985) class B

EN60555-2(1995) class B

EN60555-3

IEC1000-4-2(1995) 4kV CD, 8kV AD

IEC1000-4-3(1995) 3V/m

IEC1000-4-4(1995) 1kV - (power line),

0.5kV - (signal line)

This product complies with the requirements of the Low Voltage

Directive 73/23/EEC and the EMC Directive 89/336/EEC.

Warning! Do not plug a phone jack connector in the RJ-45 port.

This may damage this device. Les raccordeurs ne sont pas

utilisé pour le système téléphonique!

Safety Compliance

Underwriters Laboratories Compliance Statement

Important! Before making connections, make sure you have the

correct Cord Set. Check it (read the label on the cable) against

the following specification list.

egatloV snoitacificepSteSdroC

stloV021teSdroCdeifitreCASC/detsiLLU

drocrotcudnoceerhtTJSroTVSepyt;GWA81uiniM

teef51fohtgneluixaM

V521,A51detargulptnehcattaepytgnidnuorg,edalblellaraP

stloV042teSdroCdeifitreCASC/detsiLLU

)acireAhtroN(drocrotcudnoceerhtTJSroTVSepyt;GWA81uiniM

teef51fohtgneluixaM

V521,A51detargulptnehcattaepytgnidnuorg,edalbednaT

stloV042

)ylnoeporuE(

uinihtiwsrotcudnoceerhtgnivahdrocF-VV50HhtiwteSdroC

²57.0foreteaid

V052,A01detargulpela;elcatpecer023-CEI

Quick Installation Guide

Wichtige Sicherheitshinweise (German Safety Statement)

1. Bitte lesen Sie diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen.

Verwenden Sie keine Flüssigoder Aerosolreiniger. Am besten eignet

sich ein angefeuchtetes Tuch zur Reinigung.

4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und

leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.

Ein Kippen oder Fallen könnte Beschädigungen hervorrufen.

7. Die Belüftungsöffnungen dienen der Luftzirkulation, die das Gerät vor

Überhitzung schützt. Sorgen Sie dafür, daßdiese Öffnungen nicht

abgedeckt werden.

8. Beachten Sie beim Anschlußan das Stromnetz die Anschlußwerte.

9. Verlegen Sie die Netzanschlußleitung so, daßniemand darüber fallen

kann. Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten

Sie es vom Stromnetz trennen. Somit wird im Falle einer

Überspannung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder

Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.

elektrischen Schlag auslösen.

13. Öffnen sie niemals das Gerät. Das Gerät darf aus Gründen der

elektrischen Sicherheit nur von authorisiertem Servicepersonal

geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu

trennen und von einer qualifizierten Servicestelle zu überprüfen:

a. Netzkabel oder Netzstecker sind beschädigt.

b. Flüssigkeit ist in das Gerät eingedrungen.

c. Das Gerät war Feuchtigkeit ausgesetzt.

d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend

funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung

erzielen.

e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Stellen Sie sicher, daßdie Stromversorgung dieses Gerätes nach der

EN 60950 geprüft ist. Ausgangswerte der Stromversorgung sollten die

Werte von AC 7,5-8V, 50-60Hz nicht über oder unterschreiten sowie

den minimalen Strom von 1A nicht unterschreiten.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weniger.

Tabla de contenidos

Otros manuales de Cambiar de Accton Technology

Accton Technology

Accton Technology ES4626 Manual de programación

Accton Technology

Accton Technology ETHERHUB-16MI+ E0398-R01 Manual de usuario

Accton Technology

Accton Technology CheetaHub Power-3008A Manual de usuario

Accton Technology

Accton Technology Fast EtherHub 3500 Series Manual de usuario

Accton Technology

Accton Technology Fast EtherHub-12se Manual de usuario

Accton Technology

Accton Technology VS4512DC Manual de programación

Accton Technology

Accton Technology EH3016G Manual de usuario

Accton Technology

Accton Technology ETHERHUB-16MI+ E0398-R01 Manual de usuario

Accton Technology

Accton Technology 12se Manual de usuario

Accton Technology

Accton Technology SwitcHub-7s Manual de usuario

Accton Technology

Accton Technology CheetahSwitch Workgroup-2027 Manual de usuario

Accton Technology

Accton Technology SwitcHub-2s Manual de usuario

Accton Technology

Accton Technology EH3008D Manual de usuario

Accton Technology

Accton Technology VM2524 Manual de usuario

Accton Technology

Accton Technology Edge-Core ES4528V Manual de usuario

Accton Technology

Accton Technology CheetaHub Power-3012B Manual de usuario

Accton Technology

Accton Technology SuperSmart EtherHub-16se Manual de usuario

Accton Technology

Accton Technology SwitcHub-2se Manual de usuario

Accton Technology

Accton Technology Volare Sensor 2 Manual de usuario

Accton Technology

Accton Technology Cheetah iSharer-3010 Manual de usuario

Accton Technology

Accton Technology ES4512C Manual de programación

Accton Technology

Accton Technology USB204A Manual de usuario

Accton Technology

Accton Technology ES3616 Manual de programación

Accton Technology

Accton Technology CheetahSwitch Workgroup-3627 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario