Abocom MH200 Manual de usuario

M73-APO09-400

Multi-Homing Dual

WAN Firewall Router

Quick Installation Guide

- 1-

Multi-Homing Dual WAN Firewall Router Overview

The Multi-Homing Dual WAN Firewall Router provides three 10/100Mbit

Ethernet network interface ports which are the LAN, WAN 1, and WAN 2

port. It also provides an easily operated software WebUI that allows users to

set system parameters or monitor network activities using a web browser.

Multi-Homing Dual WAN Firewall Router security feature

Some functions that are available in the Multi-Homing are: Packet Filter,

Proxy Server, Hacker invasion alarm, Packet monitor log, Policy, etc.

Multi-Homing Dual WAN Firewall Router installation

This product is a hardware Multi-Homing. Therefore the installation is much

easier than a software Multi-Homing. First the user has to prepare three

network cables, and connect them to the LAN, WAN 1 and WAN 2

connectors respectively. The LAN interface has to connect to the office’s

LAN network on the same HUB/Switch. The WAN 1 interface has to

connect with a WAN 1 router, DSL modem, or Cable modem. The WAN 2

interface has to connect with a WAN 2 router, DSL modem, or Cable

modem.

Multi-Homing Dual WAN Firewall Router function setting

The Multi-Homing Dual WAN Firewall Router has a built in WEBUI (Web

User Interface). All configurations and management are done through the

WEBUI using an Internet web browser.

Multi-Homing Dual WAN Firewall Router monitoring function

The Multi-Homing provides monitoring functions which contains traffic log,

event log, traffic alarm, event alarm, and traffic statistics. Traffic alarm

records the packets of hacker invasions. Not only does the Multi-Homing log

these attacks, it can be set up to send E-mail alerts to the Administrator

automatically for immediate hacker’s invasion crisis management.

Multi-Homing Dual WAN Firewall Router supporting protocols

The Multi-Homing Dual WAN Firewall Router supports all the TCP, UDP and

ICMP protocols, such as HTTP, TELNET, SMTP, POP3, FTP, DNS, PING,

etc. System Administrators can set up proprietary protocols according to

operating requirements.

Hardware Description

DC Power

Reset WAN 1

External 1 Port LAN

WAN 2

External 2 Port

External Port (WAN 1): Use this port to connect to the WAN 1 router,

DSL modem, or Cable modem.

External Port (WAN 2): Use this port to connect to the WAN 2 router,

DSL modem, or Cable modem.

LAN Port (LAN): Use this port to connect to the LAN network of the office.

Reset: Reset the Multi-Homing Dual WAN Firewall Router to the original

default settings.

DC Power: connect one end of the power supply to this port, the other

end to the electrical wall outlet.

- 2-

Connecting Example:

Multi-Homing:

LAN Port = 192.168.1.1

WAN 1 Port = x.x.x.x (provided by ISP)

WAN 2 Port = x.x.x.x (provided by ISP)

Connection Type: 10/100 Mbps Cable Connection

【LAN 1 Port】= 192.168.1.3

【LAN 2 Port】= 192.168.1.4

【LAN 3 Port】= 192.168.1.5

【LAN 4 Port】= 192.168.1.6

【WAN 1 Port】= 61.11.11.11

【WAN 2 Port】= 61.22.22.22

- 3-

Multi-Homing Dual WAN Firewall Router Software (management

tool) description

Multi-Homing Dual WAN Firewall Router management tool: WebUI

The main menu functions are located on the left-hand side of the screen, and

the display window will be on the right-hand side. The main functions include

12 items, which are: Administrator, Configuration, Address, Service,

Schedule, Policy, VPN, Virtual Server, Log, Alarm, Statistics, and Status.

- 4-

- 5-

Quick Setup

WebUI Configuration example

STEP 1:

Connect both the Administrator’s PC and the LAN port of the Multi-Homing

Dual WAN Firewall Router to a hub or switch. Make sure there is a link light

on the hub/switch for both connections. The Multi-Homing Dual WAN Firewall

Router has an embedded web server used for management and

configuration. Use a web browser to display the configurations of the

Multi-Homing (such as Internet Explorer 4(or above) or Netscape 4.0(or

above) with full java script support). The default IP address of the

Multi-Homing is 192.168.1.1 with a subnet mask of 255.255.255.0. Therefore,

the IP address of the Administrator PC must be in the range between

192.168.1.2 /24– 192.168.1.254/24.

If the company’s LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN IP

Address is 172.16.0.1) the Administrator must change his/her PC IP address

to be within the same range of the LAN subnet (i.e. 192.168.0.0). Reboot

the PC if necessary.

By default, the Multi-Homing Dual WAN Firewall Router Multi-Homing is

shipped with its DHCP Server function enabled. This means the client

computers on the LAN network including the Administrator PC can set their

TCP/IP settings to automatically obtain an IP address from the Multi-Homing

Dual WAN Firewall Router.

The following table is a list of private IP addresses. These addresses may

not be used as a WAN 1 IP address.

10.0.0.0 ~ 10.255.255.255

172.16.0.0 ~ 172.31.255.255

192.168.0.0 ~ 192.168.255.255

STEP 2:

Once the Administrator PC has an IP address on the same network as the

Multi-Homing Dual WAN Firewall Router, open up an Internet web browser

and type in http://92.168.1.1 in the address bar.

A pop-up screen will appear and prompt for a username and password. A

username and password is required in order connect to the Multi-Homing.

Enter the default login username and password of Administrator (see below).

Username: admin

Password: admin

Click OK

- 6-

- 7-

STEP 3:

After entering the username and password, the Multi-Homing Dual WAN

Firewall Router WEBUI screen will display.

Select the Interface tab on the left menu and a sub-function list will be

displayed.

Click on LAN from the sub-function list, and enter proper Layer 3 network

setup information. (for example)

LAN interface IP Address 192.168.1.1

NetMask 255.255.255.0

Select the Interface tab on the left menu and a sub-function list will be

displayed.

Click on WAN from the sub-function list, and enter proper Layer 3 network

setup information.

Click Modify to modify WAN 1/2 settings.

Note: The above figures are only examples. Please fill in the appropriate IP

address information provided to you by the ISP.

- 8-

STEP 4:

Click on the Policy tab from the main function menu, and then click on

Outgoing from the sub-function list.

Click on New Entry button.

When the New Entry option appears, then enter the following configuration:

Source Address – select “Inside_Any”

Destination Address – select “Outside_Any”

Service - select “ANY”

Action - select “Permit”

Click on OK to apply the changes.

- 9-

Tabla de contenidos

Otros manuales de Enrutador de red de Abocom

Abocom

Abocom WRN500 Manual de usuario

Abocom

Abocom SW500A Manual de usuario

Abocom

Abocom M73-APO07-300 Manual de usuario

Abocom

Abocom SW800RE Manual de usuario

Abocom

Abocom PLS342 Manual de usuario

Abocom

Abocom WR5503U Manual de usuario

Abocom

Abocom SW800 Manual de usuario

Abocom

Abocom WR104 Manual de usuario

Abocom

Abocom PLS485 Manual de usuario

Abocom

Abocom SW1600B Manual de usuario

Abocom

Abocom PL1000 Manual de usuario

Abocom

Abocom CAS2042 Manual de usuario

Abocom

Abocom CAS1040 Manual de usuario

Abocom

Abocom P3102-4g Manual de usuario

Abocom

Abocom WR5207 Manual de usuario

Abocom

Abocom ARM804 Manual de usuario

Abocom

Abocom WR5208 Manual de usuario

Abocom

Abocom BR580 Manual de usuario

Abocom

Abocom SW1600R Manual de usuario

Abocom

Abocom WR5502 Manual de usuario

Abocom

Abocom SW800AE Manual de usuario

Abocom

Abocom AR1000 Manual de usuario

Abocom

Abocom AR3000 Advanced Manual de usuario

Abocom

Abocom WR5205G Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad