ABB Arc Guard System TVOC-2-COM Hoja de instrucciones

—

Arc Guard System™ – TVOC-2-COM Modbus

Configuration manual

—

1SFC170017M0201 EN, REV C

Arc Guard System™ – TVOC-2-COM

Modbus configuration manual

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

Thank you for selecting this ABB TVOC-2 Arc Guard

System™. Carefully read and make sure that you

understand all instructions before you mount, connect,

configure the Arc Guard System.

This manual is intended for configuration of the TVOC-2-

COM Modbus interface.

The manual is available on:

http://new.abb.com/low-voltage/products/arc-guard

• Only authorized and appropriately trained personnel

are allowed to install and make the electrical

connection of the Arc Guard System in accordance with

existing laws and regulations.

• Only authorized personnel are allowed to do service

and repair on the Arc Guard System.

• Unauthorized repair will effect the warranty.

• This manual is a part of the TVOC-2 Arc Guard System.

Always keep this manual available when working with

the TVOC-2 Arc Guard System.

• Examine the Arc Guard System and the package when

you unpack your new product. If there are damages,

please contact the transportation company or the ABB

reseller/office immediately.

Safety notes

In this user manual, these symbols are used:

WARNING

General warning symbol indicates the presence

of a hazard which could result in personal injury

and damage to equipment or property.

WARNING

Warning symbol indicates the presence of

hazardous voltage which could result in personal

injury.

INFORMATION

Information sign alerts the reader to relevant

facts and conditions.

Modications to data in this manual can be applied without

notice.

General safety information

WARNING

Only authorized and appropriately trained

personnel are allowed to install and make the

electrical connection of the Arc Guard System in

accordance with existing laws and regulations.

WARNING

Examine the Arc Guard System and the package

when you unpack your new product. If there are

damages, please contact the transportation

company or the ABB reseller/office immediately.

WARNING

Only authorized and appropriately trained

service personnel are allowed to do service

and repair on the Arc Guard System. Note:

unauthorized repair will effect the warranty.

Personal

Service and repair should be performed

by authorized personnel only. Note that

unauthorized repair affects safety and warranty.

—

Read this first

Warning and safety

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

—

Arc Guard System™

TVOC-2-COM Modbus

Configuration manual

GENERAL

INFORMATION

P. 7

TROUBLESHOOTING

P. 33

MODBUS

INSTALLATION

P. 11

CHANGING MODBUS ID

AND COMMUNICATION

PARAMETERS

P. 15

FUNCTIONAL

DESCRIPTION

P. 19

01010203040506

INDEX

P. 36

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGURATION MANUAL 7

8 1.1 Introduction

8 1.2 references

8 1.3 Quick start-up

—

1 General information

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

8ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGURATION MANUAL

1.1 Introduction

This manual covers the Modbus interface, which offers

a direct connection to Modbus-RTU for the Arc Guard

System™ TVOC-2.

TVOC-2-COM will behave as a slave. This means all

communication will be performed by a master device on

the same Modbus system. Mostly this will be a PLC. This

manual explains how to install the Arc Guard System™

TVOC-2-COM to your Modbus system.

1.2 References

[1] http://www.modbus.org/docs/Modbus_Application_

Protocol_V1_1b3.pdf (2012)

[2] http://www.modbus.org/docs/Modbus_over_serial_

line_V1_02.pdf (2006)

[3] https://www.modbusdriver.com/modpoll.html

1.3 Quick start-up

1Make sure your Modbus master has been installed to

the system.

2The TVOC-2-COM will be delivered with the following

configuration:

• baud rate 19200

• parity even

• stop bits 1

• Modbus ID 248*

*Modbus ID 248 is not a valid id for a Modbus system but is used to indicate that the

communication is disabled.

3Physically connect the system to the Modbus network.

4Test communication between your master and

the TVOC-2 system. For example see chapter 5

Troubleshooting.

Figure 1

Quick start-up

Master

present

START

Set Modbus

id of TVOC-2

Connect

TVOC-2

System

Test

Ready

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

ABB ARC GUARD SYSTEM™ – TVOC-2-COM MODBUS CONFIGURATION MANUAL 9

Draft, ne pas diffuser Wed Dec 05 2018 12:41:51 GMT+0100 (Romance Standard Time)

Tabla de contenidos

Otros manuales de Electricidad industrial de ABB

ABB

ABB SACE Emax 2 Manual de usuario

ABB

ABB EBN861 Manual de usuario

ABB

ABB POLIM-D Manual de usuario

ABB

ABB SAHARA Series Manual de usuario

ABB

ABB Emax2 Manual de usuario

ABB

ABB ACS 800 Series Manual de usuario

ABB

ABB Relion 615 series Hoja de datos

ABB

ABB EBS862 Manual de usuario

ABB

ABB TMAX XT XT2 THERMOMAGNETIC Instrucciones de instalación

ABB

ABB AF400 Manual de usuario

ABB

ABB GSC Series Manual del producto

ABB

ABB EBS852 Manual de usuario

ABB

ABB Tmax RC223 T3 Manual de usuario

ABB

ABB Emax Manual de usuario

ABB

ABB Relion 670 series Guía del usuario

ABB

ABB TA0107L Manual de usuario

ABB

ABB CR305 Manual de usuario

ABB

ABB TMAX XT XT7 Instrucciones de instalación

ABB

ABB Tmax MOE/E T6 Manual de usuario

ABB

ABB ACS 800 Series Manual de usuario

ABB

ABB PCS100 AVC-40-1B Manual de usuario

ABB

ABB PQFS Manual

ABB

ABB Type A Manual de operación y mantenimiento

ABB

ABB Emax X1 B 1150 V Manual de usuario

Manuales populares de Electricidad industrial de otras marcas

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Manual técnico

Abtech

Abtech HVJB Series Guía

Murata

Murata GRM0335C1H8R1DA01 Series Manual de usuario

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Manual de usuario

Eaton

Eaton Ulusoy HMH24-04 Manual de usuario

Newlong

Newlong NP-7H Manual de usuario

Murata

Murata GJM0335C1E4R4BB01 Series Manual de usuario

Stahl

Stahl 8575/12 Manual de usuario

SI Pegasus Manual de usuario

Murata

Murata GRM1555C1H2R7CA01 Seies Manual de usuario

Murata

Murata GRM0225C1E6R4BA03 Series Manual de usuario

Cooper Power Systems

Cooper Power Systems VXE15 Manual de usuario

S&C

S&C Vista SD Manual de usuario

Murata

Murata GRM0335C2A7R3CA01 Series Manual de usuario

Siemens

Siemens 3VA9988-0BM10 Manual de usuario

Siemens

Siemens SITRANS LVS100 Manual de usuario

Murata

Murata GRM32ER60G227ME05 Series Manual de usuario

Siemens

Siemens SENTRON SUPERSWITCH 3KL82 Series Manual de usuario