ABB JSM D28 Handle profile Manual de usuario

2TLC010040M0201 Rev. A www.abb.com/jokabsafety 1(4)

Installation Guide

JSM D28 Handle profile

General description

JSM D28 is a handle/cover in aluminum for Magne 2, Magne 3 and Magne 4, designed to be used on

conventional doors with a minimum opening radius of 200 mm.

Magne, Eva, anchor plate and cellular rubber are not included in JSM D28, these items has to be ordered

separately.

Item overview

Article no: 2TLA042023R0100

Name/Description JSM D28 Handle profile

2TLC010040M0201 Rev. A www.abb.com/jokabsafety 2(4)

Eva – Orientation and mounting

Depending on how Magne is mounted on the fence, Eva and the anchor plate can be mounted in two ways.

Ensure that Eva is oriented and mounted in the corresponding mounting holes to which the Magne model

is mounted. See figures below for different ways of orientation and mounting of Eva.

Installation and mounting

Note! In the following step by step illustration, a Magne 4 is mounted.

Pre-assemble Magne and mount it on to the door

post.

Mount Eva sensor with self-tapping screw 4,2x16

(x2). Make sure Eva is oriented correctly and that

the correct mounting holes are used.

IMPORTANT!

Orientation and mounting position of Eva

depends on Magne model and how Magne is

mounted on the fence. Spacer DA2 has to be used

in the holes at the back side of Eva.

2TLC010040M0201 Rev. A www.abb.com/jokabsafety 3(4)

Mount positioning/stop screw (1 pce 4,2x16 and 3

pcs DA2) for the anchor plate.

Pre-assemble the anchor plate with cellular rubber.

Tighten the screws by hand, do not use any tool.

IMPORTANT!

Over tightening might deform the anchor plate,

with decreased holding force as result. A

deformed anchor plate has to be replaced.

Insert/slide the anchor plate in to the handle

profile.

Mount the positioning/stop screw (1 pce 4,2x16

and 3 pcs DA2) for the anchor plate.

Pre-assemble the handle profile using a M6-

mounting kit.

Mount the two end caps using self-tapping screws

3,2x13 (x6).

Note! End cap with opening for cable can be

mounted on any profile end. The fourth screw is

mounted later on (see step 11)

2TLC010040M0201 Rev. A www.abb.com/jokabsafety 4(4)

Install the handle profile on to the door and make

sure its placement is aligned with Magne.

10.

Insert the cover profile.

11.

Mount the two remaining self-tapping screws

(3,2x13) to fix the cover plate and to finalize the

installation.

12.

To ensure that the function is working correctly,

open/close the door several times.

Model data

Name

Article no.

Description

JSM D28 Handle profile

2TLA042023R0100

Handle profile in aluminum

Accessories

Article no.

Description

Eva General code

2TLA020046R0800

Eva Unique code

2TLA020046R0900

Magne anchor plate 32A

2TLA042023R1300

incl. cellular rubber

Magne anchor plate 32B

2TLA042023R0400

with perm.magnet incl. cellular rubber

To see the complete product range - visit http://www.abb.com/jokabsafety

Otros manuales de Electricidad industrial de ABB

ABB

ABB Zenith ZT30 Manual de usuario

ABB

ABB Smile 41 AS-i Series Manual de usuario

ABB

ABB SACE Emax 2 E2.2 Manual de usuario

ABB

ABB TMAX XT XT6 ELECTRONIC Instrucciones de instalación

ABB

ABB MC1 Manual de usuario

ABB

ABB PCS100 AVC-40-1B Manual de usuario

ABB

ABB SACE Emax 2 Manual de usuario

ABB

ABB V-Contact VSC Series Guía rápida

ABB

ABB UZE Manual de usuario

ABB

ABB UEKE 3A1 Manual de usuario

ABB

ABB SACE Emax 2 Manual de usuario

ABB

ABB Advance Manual de usuario

ABB

ABB SACE PR010/K Manual de usuario

ABB

ABB Type A Manual de operación y mantenimiento

ABB

ABB E-Box Manual de usuario

ABB

ABB V-Contact VSC Series Guía rápida

ABB

ABB Arc Guard System TVOC-2-COM Hoja de instrucciones

ABB

ABB MSOX Manual de usuario

ABB

ABB POLIM-D Manual de usuario

ABB

ABB TPS44-H32 Manual de usuario

ABB

ABB Sace Tmax XT XT5 THERMOMAGNETIC Instrucciones de instalación

ABB

ABB EBS852 Manual de usuario

ABB

ABB ACS 800 Series Manual de usuario

ABB

ABB MNS-SG Manual de usuario

Manuales populares de Electricidad industrial de otras marcas

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Manual técnico

Abtech

Abtech HVJB Series Guía

Murata

Murata GRM0335C1H8R1DA01 Series Manual de usuario

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Manual de usuario

Eaton

Eaton Ulusoy HMH24-04 Manual de usuario

Newlong

Newlong NP-7H Manual de usuario

Murata

Murata GJM0335C1E4R4BB01 Series Manual de usuario

Stahl

Stahl 8575/12 Manual de usuario

SI Pegasus Manual de usuario

Murata

Murata GRM1555C1H2R7CA01 Seies Manual de usuario

Murata

Murata GRM0225C1E6R4BA03 Series Manual de usuario

Cooper Power Systems

Cooper Power Systems VXE15 Manual de usuario

S&C

S&C Vista SD Manual de usuario

Murata

Murata GRM0335C2A7R3CA01 Series Manual de usuario

Siemens

Siemens 3VA9988-0BM10 Manual de usuario

Siemens

Siemens SITRANS LVS100 Manual de usuario

Murata

Murata GRM32ER60G227ME05 Series Manual de usuario

Siemens

Siemens SENTRON SUPERSWITCH 3KL82 Series Manual de usuario