3One data IES206 Series Manual de usuario

IES206 Series

Unmanaged Industrial Ethernet

Switch Quick Installation Guide

3onedata Co., Ltd.

Address:

3/B, Zone 1, Baiwangxin High Technology

Industrial Park, Xili, Nanshan District,

Shenzhen

Website:

www.3onedata.com

Tel:

+86 0755-26702688

Fax:

+86 0755-26703485

【Package Checklist】

Please check whether the package and accessories are intact

while using the switch for the first time.

Industrial Ethernet switch

Certification

Quick installation guide

Warranty card

DIN-Rail mounting attachment

If any of these items are damaged or lost, please contact our

company or dealers, we will solve it ASAP.

【Product Overview】

The series products are unmanaged industrial Ethernet switch.

Models as follows:

Model I. IES206-2GF-2P (12~48VDC) (2 Gigabit Fiber Ports

+ 4 100M Copper Ports, 12~48VDC Dual Power

Supply)

Model II.IES206-2GF-P (220VAC) (2 Gigabit Fiber Ports + 4

100M Copper Ports, 100~240VAC)

Model III. IES206-2GS (2 Gigabit SFP Slots + 4 100M

Copper ports, 12~48VDC Dual Power Supply)

【Panel Design】

Model l: Top view, Bottom view and Rear view

Model l: Front view and Side view

1. Grounding screw

2. DC power input terminal block

3. Location hole for wall mounting

4. DIN-Rail mounting kit

5. Device running indicator RUN

6. Ethernet port status indicator

7. 1000Base-FX Gigabit Ethernet fiber port

8. 10/100Base-T(X) 100M Ethernet copper port

Model II: Top view, Bottom view and Rear view

Model II: Front view and Side view

1. Grounding screw

2. AC power input terminal block

3. Location hole for wall mounting

4. DIN-Rail mounting kit

5. Device running indicator RUN

6. Ethernet port status indicator

7. 1000Base-FX Gigabit Ethernet fiber port

8. 10/100Base-T(X) 100M Ethernet copper port

Model lII: Top view, Bottom view and Rear view

Model III: Front view and Side view

1. Grounding screw

2. DC power input terminal block

3. Location hole for wall mounting

4. DIN-Rail mounting kit

5. Device power status indicator PWR

6. Gigabit Ethernet SFP port status indicator

7. 1000Base-SFP Gigabit Ethernet SFP slot

8. 10/100Base-T(X) 100M Ethernet copper port with

indicator

【Mounting Dimension】

Unit: mm

Model I and Model II

Model III

Attention before mounting:

Don't place or install the device in area near water or

moist, keep the relative humidity of the device

surrounding between 5%~95% without condensation.

Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the

device.

The device surface temperature is high after running;

please don't directly contact to avoid scalding.

【DIN-Rail Mounting】

For convenient usage in industrial environments, the product

adopts 35mm DIN-Rail mounting, mounting steps as below:

Check whether the DIN-Rail mounting kit thatStep 1 comes with the device is installed firmly.

Insert the bottom of DIN-Rail mounting kit (one sideStep 2 with spring support) into DIN-Rail, and then insert

the top into DIN-Rail.

Tips:

Insert a little to the bottom, lift upward and then insert

to the top.

Check and confirm the product is firmly installed onStep 3 DIN-Rail, and then mounting ends.

【Disassembling DIN-Rail】

Power off the device.Step 1 After lift the device upward slightly, first shift out theStep 2 top of DIN-Rail mounting kit, and then shift out the

bottom of DIN-Rail, disassembling ends.

Attention before powering on:

Power ON operation: first connect power line to the

connection terminal of device power supply, and then

power on.

Power OFF operation: first unpin the power plug, and

then remove the power line, please note the operation

order above.

【Power Supply Connection】

Model I: DC power supply

The Model I provides 4 pins power

supply input terminal blocks and two

independent DC power supply

systems of PWR1 and PWR2. The

power supply supports nonpolarity

and anti-reverse connection. It can normally operate after

reverse connection. Power supply range: 12～48VDC

Model Il: AC power supply

The Model II provides 4 pins power

supply input terminal blocks and 1

AC power supply system. Power

supply range: 100～240VAC

Model Ill: DC power supply

The Model III provides 4 pins power

supply input terminal blocks and two

independent DC power supply

systems of PWR1 and PWR2. The

power supply supports nonpolarity

and anti-reverse connection. It can

normally operate after reverse connection. Power supply

range: 12～48VDC

【Checking LED Indicator】

This device provides LED indicators to monitor device’s

operating states, which has simplified the process of

troubleshooting comprehensively. The detailed status of each

LED is described in the table as below:

Model I and Model II

LED

Status

Description

RUN

ON The device is powered on or

in abnormal condition

OFF The device is not powered on

or in abnormal condition

Blinking

Blink once per second, the

device is running normally

Link/Act

(1-4/G1-G2)

ON The Ethernet

port has

established valid network

connection

Blinking The Ethernet port is in an

active network status

OFF The Ethernet

port has not

established

valid network

connection

Model III

LED

Status

Description

PWR ON PWR is connected and

running normally

OFF PWR is disconnected and

running abnormally.

5-6

ON The Port 5-6 has

established valid network

connection

Blinking The Port 5-6 is in an active

network status

OFF The Port 5-6

has not

established valid network

connection

RJ45

LED

(1-4)

10/100M ON The Port 1-4 is in 100M

operating mode

OFF The Port 1-4

is in 10M

operating mode

Link/

ACT

ON The Port 1-4 has

established valid network

connection

Blinking The Port 1-4 is in an active

network status

OFF The Port 1-4

has not

established valid network

connection

【Specification】

Panel

Gigabit fiber port 1000Base-FX, optional

SC/ST/FC

Gigabit SFP

1000Base-SFP, SFP slot

100M copper port 10/100Base-T(X), self-adaptive

RJ45 port, self-adaptive full/half

duplex, support MDI/MDI-X

self-adaption

Indicator

Power indicator, running

indicator, interface indicator

Switch property

Backplane bandwidth

7.6G

Packet buffer size

1Mbit

MAC address table

Power supply

Input power supply

DC dual power supply

device

Power supply range: 12~48VDC

Power protection: dual power

redundancy backup,

anti-reverse connection

AC single power supply

device

Power supply range:

100~240VAC

Access terminal 4-core 7.62mm

pitch terminal

block

Consumption

Model I No-load: 3.8W@24VDC

Full-load: 5.5W@24VDC

Model II No-load: 4.4W@220VAC

Full-load: 5.6W@220VAC

Model III No-load: 5.9W@24VDC

Full-load: 7.3W@24VDC

Environmental Limits

Working temperature

-40

～

℃

Storage temperature

-40

～

℃

Working humidity

～

95% (no condensation)

Protection grade

IP40 (metal shell)

Este manual sirve para los siguientes modelos

Otros manuales de Cambiar de 3One data

3One data

3One data TNS5800 Series Manual de usuario

3One data

3One data IES2010 Series Manual de usuario

3One data

3One data IPS7112G-4GS-8GPOE Manual de usuario

3One data

3One data IES615-2DI Series Manual de usuario

3One data

3One data IES7120-4GS Series Manual de usuario

3One data

3One data IPS316-2GC-4POE Manual de usuario

3One data

3One data IES5028-4GS Manual de usuario

3One data

3One data ICS5428 Series Manual de usuario

3One data

3One data IES2008 Manual de usuario

3One data

3One data ES209G-1GF Manual de usuario

3One data

3One data IES3000 Series Manual de usuario

3One data

3One data PS5026G-2GS-24PoE Instrucciones de funcionamiento y mantenimiento

3One data

3One data IES5024 Series Manual de usuario

3One data

3One data IES206G-2GS Manual de usuario

3One data

3One data TNS5800D Series Manual de usuario

3One data

3One data IES618 Series Manual de usuario

3One data

3One data PS5010G-2GS-8PoE Manual de usuario

3One data

3One data ICS5530 Series Manual de usuario

3One data

3One data TNS5800 Series Manual de usuario

3One data

3One data IES6100 Series Manual de usuario

3One data

3One data TNS5800 Series Manual de usuario

3One data

3One data ICS5400TSN-24GT16GS4XS-LN Series Manual de usuario

3One data

3One data IES5028G-4GS-8GC Manual de usuario

3One data

3One data IPS7110-2GC-8POE Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario