3Com 3C13618 Manual de funcionamiento

3Com Router

Command Reference Guide — V1.00

http://www.3com.com/

Part No.

Published August 2003

3Com Corporation

350 Campus Drive

Marlborough, MA

01752-3064

to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the

part of 3Com Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or expressed, including, but not

limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make

improvements or changes in the product(s) and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product

as a separate document, in the hard copy documentation, or on the removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If

you are unable to locate a copy, please contact 3Com and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software described herein are

provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as “Commercial

Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is provided

with only such rights as are provided in 3Com’s standard commercial license for the Software. Technical data is provided with limited rights only as

provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any

portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation.

Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of

Microsoft Corporation. Novell and NetWare are registered trademarks of Novell, Inc.

All other company and product names may be trademarks of the respective companies with which they are associated.

Getting Started

Chapter 1 Command Line Interface Commands........................................................................... 2

1.1 Command Line Interface Commands................................................................................... 2

1.1.1 display history-command ........................................................................................... 2

1.1.2 language..................................................................................................................... 3

1.1.3 quit.............................................................................................................................. 3

1.1.4 return.......................................................................................................................... 4

1.2 Basic System Management and Configuration Commands................................................. 4

1.2.1 clock........................................................................................................................... 4

1.2.2 display base-information............................................................................................ 5

1.2.3 display clock............................................................................................................... 6

1.2.4 display duration..........................................................................................................7

1.2.5 display processes cpu................................................................................................ 7

1.2.6 display processes memory......................................................................................... 8

1.2.7 display reboot............................................................................................................. 9

1.2.8 display sysname....................................................................................................... 10

1.2.9 display version.......................................................................................................... 10

1.2.10 reboot..................................................................................................................... 11

1.2.11 setup....................................................................................................................... 12

1.2.12 sysname................................................................................................................. 13

3Com Router Command Reference Guide — V1.00

Chapter 1 Command Line Interface Commands

1.1 Command Line Interface Commands

1.1.1 display history-command

Syntax

display history-command

View

All views

Parameter

None

Description

Using the display history-command command, you can view the history of

commands input by the current user.

By default, the operating system saves a maximum of 10 commands. You can access

them through the Up and Down keys on the keyboard.

Example

# Display the command history input by the current user.

[3Com] display history-command

No 1. interface ethernet 0

No 2. ip address 10.110.28.2 255.255.192.0

No 3. down

No 4. up

No 5. quit

No 6. rip

No 7. network 10.0.0.0

No 8. network 20. 0.0.0

No 9. quit

No10. display history-command

Getting Started

1.1.2 language

Syntax

language

View

System view

Parameter

None

Description

Using the language command, you can switch the language mode of the command

line interface.

By default, the language mode of command line interface is English.

Example

None

1.1.3 quit

Syntax

quit

View

All views

Parameter

None

Description

Using the quit command, you can return to the previous view from the current view.

In addition, you can return directly to the system view from the current view by

entering Ctrl+Q.

3Com Router Command Reference Guide — V1.00

Example

# Return from the Ethernet interface view to the system view.

[3Com-Ethernet0] quit

[3Com]

1.1.4 return

Syntax

return

View

All views

Parameter

None

Description

Using the return command, you can return to the system view from the current view.

In addition, you can directly return to the system view from the current view by

entering Ctrl+Q.

Example

# Return from the Ethernet interface view to the system view.

[3Com-Ethernet0] return

[3Com]

1.2 Basic System Management and Configuration

Commands

1.2.1 clock

Syntax

clock hour:minute:second day month year

View

System view

Getting Started

Parameter

hour:minute:second: Current clock. hour, ranging from 0 to 23; minute and second,

ranging from 0 to 59.

year/month/day:Current date. year, ranging from 1997 to 2097, month, ranging from

1 to 12, day, ranging from 1 to 31.

Description

Using the clock command, you can set the current date and clock of the router.

If the router is not yet equipped with a hardware real-time clock, the default clock

value is 0:0:0 1/1/1998 when the system is booted. If the router is equipped with a

real-time clock, the system will read the clock value when booted, and use it for

setting the system time.

When powered off, the routers stop keeping time, so it is necessary to reset the

current date and time for the router in a rigorous application environment.

For related commands, see display clock.

Example

# Set the current date and clock of the router to 0:0:0 Jan. 2nd, 2001.

[3Com] clock 0:0:0 2 1 2001

1.2.2 display base-information

Syntax

display base-information [ page ]

View

All views

Parameter

page: Display in pages.

Description

Using the display base-information command, you can view the basic information

of the system, including the information on version, current configuration, interface,

memory and traffic on the interface. This information helps the network administrator

and technical assistance engineers to learn the overall condition of the router.

3Com Router Command Reference Guide — V1.00

Example

# Display the basic system information.

[3Com] display base- information

……

---------------------Display Version-------------------

……

-------------------Display RunningConfig----------------

……

--------------------Display Interfaces------------------

……

-------------------Display Memory Detail------------------

……

--------------------Display Ip Traffic--------------------

……

-------------------Display Ip Interface-------------------

……

1.2.3 display clock

Syntax

display clock

View

All views

Parameter

None

Description

Using the display clock command, you can view the current date and time of the

system.

You can execute this command to find out if the system time is correct. If the system

time is incorrect, you can adjust it.

For related commands, see clock.

Example

# Display the current date and clock of the system.

Getting Started

[3Com] display clock

Current router time:05:46:04 Oct 10 2000

1.2.4 display duration

Syntax

display duration

View

All views

Parameter

None

Description

Using the display duration command, you can view the time duration from booting

of the router to executing of this command.

Example

# Display the time duration from booting of the router to executing this command.

[3Com] display duration

3Com R5640 uptime is 0 days 1 hours 38 minutes 4 seconds.

1.2.5 display processes cpu

Syntax

display processes cpu

View

All views

Parameter

None

Description

Using the display processes cpu command, you can view the occupation rate of

CPU in the current system.

3Com Router Command Reference Guide — V1.00

Example

# Display the occupation rate of CPU in the current system.

[3Com] display processes cpu

Current CPU load: 5%

1.2.6 display processes memory

Syntax

display processes memory { all | blksize size } [ detail ]

View

All views

Parameter

all: Display utilization of all memory.

blksize size: Display the utilization status of the memory block with specified size.

The optional size can be 32, 64, 128, 512, 1024, 2048, 4096 and 8192.

detail: Display the details of all memory slices (including memory block address, the

utilized length of the memory slice).

Description

Using the display processes memory command, you can view the utilization of

memory in the current system.

This command displays all the statistics information about memory, such as the size

of the memory, the size of each memory raw slice, the size of free memory and the

size of the memory utilized.

Example

# Display the utilization of all memory in the system.

[3Com] display processes memory all

Total: 19029120 Slice: 1300992 RawSlice: 1706596 Free: 16021532

--------------------------------------------------------------------

Slice Memory Usage:

Block Size 32 Free 1419 Used 420 Total 1839

Block Size 64 Free 5 Used 86 Total 91

Block Size 128 Free 1 Used 315 Total 316

Block Size 256 Free 4 Used 338 Total 342

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de 3Com

3Com

3Com OfficeConnect WX4400 Manual de instalación

3Com

3Com MSR 50 Series Instrucciones originales

3Com

3Com OfficeConnect 3CP4144 Guía de configuración

3Com

3Com SuperStack II 32x Manual de usuario

3Com

3Com Router 3012 Manual de usuario

3Com

3Com Router 6000 Series Manual de usuario

3Com

3Com OfficeConnect 3CP4144 Instrucciones de instalación

3Com

3Com VG Series Manual de usuario

3Com

3Com NJ90 Network Jack Manual de usuario

3Com

3Com 3C13751 Manual de usuario

3Com

3Com MSR 20-40 Manual de instrucciones

3Com

3Com 3C16980A SuperStack3300 Manual de usuario

3Com

3Com Router 3030 Manual de instrucciones

3Com

3Com Router 3033 Manual de usuario

3Com

3Com OfficeConnect 3CRWDR200A-75 Manual de usuario

3Com

3Com Router 3016 Manual de usuario

3Com

3Com Router 6000 Series Manual de usuario

3Com

3Com X5 Manual de usuario

3Com

3Com 3C410012A - OfficeConnect Remote 531 Access... Manual de usuario

3Com

3Com Router 3031 Manual de funcionamiento

3Com

3Com OfficeConnect Remote 812 Manual de usuario

3Com

3Com OfficeConnect Ethernet Hub 16C Manual de usuario

3Com

3Com 3CNJ205 Manual de usuario

3Com

3Com 3C17540 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad