ZyXEL Communications NWA-3100 Manual de usuario

NWA-3100

802.11a/b/g Wireless Access Point

Quick Start Guide

Version 3.60

10/2006

Edition 1

Table of Contents

ENGLISH 1

DEUTSCH 13

ESPAÑOL 27

FRANÇAIS 41

ITALIANO 55

РУССКИЙ 69

简体中文 83

SVENSKA 95

繁體中文 109

ENGLISH

Overview

This Quick Start Guide shows how to set up and configure the NWA-3100 (Zin the figure)

to allow wireless clients to securely access your wired network. See your User’s Guide for

more information.

"You may need your Internet access information.

To set up your wireless network you need to:

1Connect the hardware.

2Access the Web configurator.

3Configure Internet access.

4Install the hardware.

5Set up Power over Ethernet (optional).

ENGLISH

1 Connect the Hardware

1Using an Ethernet cable, connect the ETHERNET port to a computer for initial

configuration.

2Connect the POWER 12VDC socket to a power source using only the included power

adaptor.

"Connect the NWA-3100’s ETHERNET port to an Ethernet jack with network

access after you have completed the initial configuration.

ENGLISH

1.1 LEDs

The PWR and ZyAIR LEDs turn on when the power is connected. The ETHN LED turns on

if the ETHERNET port is properly connected.

VIf the PWR LED does not turn on, make sure you are using the correct

power adaptor and that the power adaptor is plugged into an appropriate

power supply. Unplug the power adaptor and plug it in again. If the error

persists, you may have a hardware problem. In this case, you should

contact your vendor.

If the ETHN LED does not turn on, check the cable connection to the NWA-

3100’s ETHERNET port. Ensure your computer’s network card is working

properly.

2 Access the Web Configurator

"Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later

versions with JavaScript enabled.

ENGLISH

2.1 Set Up Your Computer’s IP Address

You must first set your computer to use a static IP address in the 192.168.1.3 -

192.168.1.254 range with a subnet mask of 255.255.255.0. This ensures that your

computer can communicate with your NWA-3100.

The following instructions are for the Windows 2000, Windows NT and Windows XP

operating systems.

1In Windows XP, click Start > Control Panel.

In Windows 2000/NT, click Start > Settings > Control Panel.

2In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3Right-click Local Area Connection and then click Properties.

4Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click

Properties.

5The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows

XP).

6Select Use the following IP address and fill in the IP address (choose one in the

range 192.168.1.3 - 192.168.1.254), Subnet mask (255.255.255.0), and Default

gateway (192.168.1.2) fields.

7Click OK to close the Internet Protocol (TCP/IP) Properties window.

8Click Close (OK in Windows 2000/NT) to close the Local Area Connection

Properties window.

ENGLISH

Close the Network Connections window.

2.2 Log Into the Web Configurator

"Even though you can connect to the NWA-3100 wirelessly, it is

recommended that you connect your computer to the ETHERNET port for

initial configuration.

1Launch your web browser. Enter

192.168.1.2 (the NWA-3100’s default

IP address) as the address.

VIf you cannot access the Web configurator, make sure the IP addresses

and subnet masks of the NWA-3100 and the computer are in the same IP

address range (see Section 2.1).

2Click Login (the default password

1234 is already entered).

3Change the login password by

entering a new password and

clicking Apply. Be sure to record the

new password and keep it in a safe

place.

ENGLISH

VIf you change the password and then forget it, you will need to reset the

NWA-3100. Refer to the User’s Guide for how to use the RESET button.

4Click Apply to replace the factory

default certificate for added security;

alternatively click Ignore to proceed

if you do not want to change the

certificate now.

5The MAIN MENU screen appears.

ENGLISH

3 Configure Internet Access

1Click SYSTEM in the navigation panel.

2The SYSTEM > General screen appears.

System Name is for identifying the NWA-3100 on your network. Choose a distinctive

name, or leave this at its default.

Domain Name: Enter a domain name if your ISP requires one for authentication.

Otherwise you can leave it blank or set to whatever may have displayed automatically.

DNS Server(s): if your ISP gave you specific DNS (Domain Name System) settings, enter

them here. Otherwise, leave these fields at their defaults.

3Click Apply.

ENGLISH

4Click WIRELESS in the

navigation panel. The

following screen appears.

"The wireless stations and the NWA-3100 must use the same SSID,

channel ID and encryption settings for wireless communication.

Operating Mode: Ensure that Access Point mode is selected.

802.11 Mode: Select the wireless standard you want your network to use. If all the

wireless clients support IEEE 802.11a, select 802.11a. Otherwise, select 802.11b+g.

Choose Channel ID: Select the wireless channel you want your network to use. To have

the NWA-3100 automatically select a channel, click Scan instead.

SSID Profile: Select the SSID profile you want to configure for network access from the

drop-down list box. This example uses the SSID03 profile.

5Click Apply to save your settings.

6Click the SSID tab. The

following screen appears.

SSID03’s default SSID (the

name of the network) is

ZyXEL03 and its default

Security setting is Security01.

If the settings are different, or if

you want to change the SSID,

select SSID03 and click Edit to

change the settings.

ENGLISH

7Click the Security tab. Ensure

that Security01 is selected

and click Edit.

8This is where you can enter

the security settings for your

wireless network. The fields

you fill in differ according to

the type of security you select

in the Security Mode field.

Select None if you do not wish

to use wireless security.

This example uses WPA2-PSK

security, in which all wireless

clients must use the same pre-

shared key to join the network.

Ensure that all your wireless

clients can use the type of

security you set. Click Apply

when you have finished.

9Click IP in the navigation

panel.

If you have an IP address to

use, select Use fixed IP

address and enter it along with

the subnet mask and gateway

IP address. Otherwise, select

Get automatically from DHCP.

Click Apply.

Otros manuales para NWA-3100

Tabla de contenidos

Idiomas:

Otros manuales de Punto de acceso inalámbrico de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications WAC6103D-I Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA3000-N Series Manual de usuario

ZyXEL Communications

ZyXEL Communications NAP102 Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA570N Manual de usuario

ZyXEL Communications

ZyXEL Communications WAP3205 Manual de usuario

ZyXEL Communications

ZyXEL Communications WAC6500 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA-1100 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-3000 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-2612HNU-Fx Series Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA-3160 Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA1120 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA3550-N - Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA-1100 Manual de usuario

ZyXEL Communications

ZyXEL Communications Wireless Access Point ZyAIR B-500 Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA1123 NI Manual de usuario

ZyXEL Communications

ZyXEL Communications HES-309M Manual de usuario

ZyXEL Communications

ZyXEL Communications WAX510D Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-1000 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-2612HNU-Fx Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyAIR G-5100 Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA5301-NJ Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA3000-N Series Manual de usuario

ZyXEL Communications

ZyXEL Communications LTE3311 series Manual de usuario

ZyXEL Communications

ZyXEL Communications NWA3560-N Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario