ZyXEL Communications Network Storage Appliance NSA-220 Manual de usuario

NSA-220

Network Storage Appliance

Quick Start Guide

Version 1.00

3/2007

Edition 1

CONTENTS

ENGLISH 2

DEUTSCH 22

FRANÇAIS 46

ITALIANO 68

日本語 90

繁體中文 112

ENGLISH

The NSA-220 lets you share files and back up data on your home network. Media clients

can also play video, music, and photo content files stored on the NSA-220. This guide

covers how to:

1Install hard drives.

2Connect the NSA.

3Access the NSA.

4Create a volume.

5Map the NSA to a

computer network drive.

6Use the NSA-220 as a

multi-media server.

7Back up files using

Memeo Autobackup.

See the User’s Guide on the

included CD for details on

configuring all of the NSA-

220’s features.

Requirements

You need the following before you start:

• NSA-220

• Included CD containing the NSA discovery Utility, the Memeo Autobackup program, media

client software, and User’s Guide

• Power cord and power supply (external)

• Included gray (Ethernet) cable

• One or two SATA I or SATA 3.0 Gbit/s (Serial Advanced Technology Attachment) compati-

ble hard disk(s) with 15-pin SATA power connectors

• Philips screwdriver to install hard disks in the disk trays

• USB cable (optional: you only need this if you want to expand storage capacity by connect-

ing compatible USB (version 2) drives). It is recommended that the USB device use it’s own

external power adaptor if it has one.

• Computer with Network Interface Card (NIC) and TCP/IP installed

• Network device such as a switch, router, or hub

ENGLISH

1 Install Hard Drives

1Hard drives are NOT hot swappable. The NSA-220 must be turned off

before you remove or install hard drive(s).

1Make sure the power and Ethernet cords are disconnected from the NSA-220.

2Loosen the

thumbscrews on the

rear panel and open

it.

3Use a

screwdriver to

remove the

retaining

screw from a

disk tray.

4Slide the disk

tray out.

5Place the disk

on a flat surface with the screw holes

facing up. Place the disk tray on top of

it and secure it with the screws as

shown.

ENGLISH

6Slide the tray back into the disk bay. Make sure

the screw hole is at the top. Push the tray in all

the way so the screw hole at the top is flush with

the internal frame.

7Put the disk tray retaining screw back in.

8Repeat steps 3to 7for a second hard

drive if you have one.

9Put the rear panel back on and tighten

the thumbscrews.

ENGLISH

2 Connect the NSA-220

1Use the included gray (Ethernet) cable to connect the

LAN port on the rear of the NSA-220 to a computer,

switch, or router on your network.

2Connect one end of the power cord to the POWER

socket on the rear of the NSA-220 and the other end to the

external power supply. Connect the external power supply to

a power outlet.

1Use ONLY the included power supply.

3Press the power button on the front of the NSA-

220 to turn it on. Look at the front panel lights.

VIf no lights turn on, make sure the power

cord is not loose and that the power

source is turned on.

• The power button light turns steady blue.

• The SYS light turns steady green after a suc-

cessful startup (it takes about 50 seconds).

• The HDD lights come on if the NSA-220 detects

hard drives in the disk bays.

• The rear panel LAN port has a light that turns

on if the Ethernet port is properly connected to

your network. It blinks while sending or receiv-

ing traffic.

"To turn off the NSA-220, press the power button in once only.

ENGLISH

3 Access the NSA-220

For a Windows computer, use section 3.1.

For another type of computer (like Mac or Linux), use section 3.2.

3.1 Using the discovery Utility to Access the NSA-220

1Insert the included CD into your

CD-ROM drive. Click Setup in

the screen that displays. Then

click the NSA-220 Discovery

Utility link.

VIf this screen does not

display, use Windows

Explorer (My Computer)

to go to the CD-ROM

(commonly drive D).

Double-click setup.exe.

2The installation wizard begins. Follow the installer

instructions. Click Finish to complete the

installation.

3In Windows, click start > All Programs

> ZyXEL NSA > NSA discovery Utility

to run the discovery utility. If your

computer has more than one network

card, then you will be prompted to select

one.

ENGLISH

4The utility lists the NSAs in

your network.

5Click the Admin icon to see

the web configurator login

screen (see section 4).

• If you need to change the

NSA-220 IP address, click

the icon under Config.

• To map the NSA-220 to a

Windows network drive,

click the icon under Map

(see section 6).

• To refresh the screen, click

discover.

3.2 Direct Access

Open Internet Explorer (or

another web browser like Firefox).

Type ‘nsa220’ as the web site

address and press [Enter] or click

Go.

4 NSA-220 Login

VIf you cannot get to the login screen, see the troubleshooting section at the

end of this guide.

1Enter the default user name ‘admin’

and password ‘1234’ and click Login.

VThe user name and

password are case sensitive.

You may need to make sure

you don’t have the caps lock

on.

ENGLISH

2It is recommended that you change to a new password (and write it down). Click Apply

to save your changes and go to the next screen.

3The My NSA screen displays.

5 Create a Volume

1Click Administration.

2If there is not already an internal volume (storage area), click Create an Internal

Volume. If your hard drive already has a volume that you want to use, skip to section 6.

ENGLISH

If you want to delete an existing volume, see the Storage Screens chapter in the User’s

Guide.

1Creating a volume formats the hard drives. All data will be lost.

3If you have two hard disks installed, select a disk configuration.

• RAID 0 (not recommended)

Has the highest write speeds but if one disk fails, you lose all the data on both

disks. Only use RAID 0 for non-critical data requiring high write speeds (like video,

graphics, and games). Total data storage space is limited to twice the capacity of

the smallest disk.

• RAID 1 (recommended)

Mirrors one disk’s data on the second disk for data security. RAID 1 is slower than

RAID 0, but you can recover all of your data if a disk fails. Total data storage space

is limited to the capacity of the smallest disk.

• JBOD (maximum data storage space)

Uses the whole storage capacity of each disk, even if there are two hard disks with

different storage capacities. With two hard disks, you can create two volumes (one

for each disk) so a failure of one hard disk should not affect the other. With two hard

disks in a single JBOD volume, you lose all the data on both disks if one disk fails.

ENGLISH

4Click Apply

to begin

volume

creation.

5Wait while

the volume is being

created.

6You can use the

volume after the

status is Healthy.

For a RAID volume,

the status is Resync

until the volume is

ready.

7If two disks are

installed and you

created a single-

disk JBOD volume,

repeat the steps to

create a second

volume on the other

disk.

Otros manuales para Network Storage Appliance NSA-220

Tabla de contenidos

Idiomas:

Otros manuales de Hardware de red de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications USG FLEX 500 Manual de usuario

ZyXEL Communications

ZyXEL Communications VES1724-56 Manual de usuario

ZyXEL Communications

ZyXEL Communications X6004 Manual de usuario

ZyXEL Communications

ZyXEL Communications FMG3010-R20A Manual de usuario

ZyXEL Communications

ZyXEL Communications Network Storage Appliance NSA-220 Manual de usuario

ZyXEL Communications

ZyXEL Communications Centralized Network Management Vantage CNM Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 2602R Series Manual de usuario

ZyXEL Communications

ZyXEL Communications OLT2406 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-2802HWL-I - V3.70 Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 2602R Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYAIR Manual de usuario

ZyXEL Communications

ZyXEL Communications PoE12 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications NSA-220 Plus Manual de usuario

ZyXEL Communications

ZyXEL Communications FMG Series Manual de usuario

ZyXEL Communications

ZyXEL Communications Network Storage Appliance NSA-220 Manual de usuario

ZyXEL Communications

ZyXEL Communications NSA-220 Plus Manual de usuario

ZyXEL Communications

ZyXEL Communications GS1900 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 971M Manual de usuario

ZyXEL Communications

ZyXEL Communications NSA-2400 Manual de usuario

ZyXEL Communications

ZyXEL Communications POE-12 Manual de usuario

ZyXEL Communications

ZyXEL Communications NXC Series Manual de instrucciones

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL P1 Manual de usuario

ZyXEL Communications

ZyXEL Communications WAP6405 Manual de usuario

ZyXEL Communications

ZyXEL Communications POE-12 Guía de referencia

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario