ZyXEL Communications GN600 Series Manual de usuario

GN600 Series

Gigabit PCI Adapter

User’s Guide

Version 1.0

April 2003

Interference Statements and Warnings

FCC Interference Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operations.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference

at his own expense.

CE Mark Warning

This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

Taiwanese BSMI (Bureau of

Standards, Metrology and

Inspection) A Warning

Certifications

Refer to the product page at

www.zyxel.com.

iii

ZyXEL Limited Warranty

ZyXEL warrants to the original end user (purchaser) that this product is free

from any defects in materials or workmanship for a period of up to two (2)

years from the date of purchase. During the warranty period and upon proof of

purchase, should the product have indications of failure due to faulty

workmanship and/or materials, ZyXEL will, at its discretion, repair or replace

the defective products or components without charge for either parts or labor

and to whatever extent it shall deem necessary to restore the product or

components to proper operating condition. Any replacement will consist of a

new or re-manufactured functionally equivalent product of equal value, and

will be solely at the discretion of ZyXEL. This warranty shall not apply if the

product is modified, misused, tampered with, damaged by an act of God, or

subjected to abnormal working conditions.

Note

Repair or replacement, as provided under this warranty, is the exclusive

remedy of the purchaser. This warranty is in lieu of all other warranties,

express or implied, including any implied warranty of merchantability or

fitness for a particular use or purpose. ZyXEL shall in no event be held liable

for indirect or consequential damages of any kind of character to the purchaser.

To obtain the services of this warranty, contact ZyXEL's Service Center for

your Return Material Authorization number (RMA). Products must be returned

Postage Prepaid. It is recommended that the unit be insured when shipped. Any

returned products without proof of purchase or those with an out-dated

warranty will be repaired or replaced (at the discretion of ZyXEL) and the

customer will be billed for parts and labor. All repaired or replaced products

will be shipped by ZyXEL to the corresponding return address, Postage Paid.

This warranty gives you specific legal rights, and you may also have other

rights that vary from country to country.

Package Contents

One GN600 series Gigabit PCI Adapter

One 3.5” Installation Disk

This User’s Guide

WoL cable

A. Hardware Installation

Follow the steps below to install

the adapter.

1. Save your work and close

all programs.

2. Disconnect the computer

power cord from the

power source.

3. Ground yourself by

wearing an anti-static

wrist strap or touching a

metal object.

4. Remove the computer

cover and a slot cover

from a PCI slot.

5. Insert the adapter into an

available PCI slot. Make

sure the adapter’s contacts

are fully seated in the slot.

If you wish to use the

Wake On LAN (WoL)

function, choose an

available PCI slot closest to the 3-pin WoL connector on the computer

motherboard. Refer to Connecting WoL Cable section.

6. Secure the adapter to the chassis with a bracket screw.

7. Replace the computer cover and power on your computer.

8. Proceed to Hardware Connection section.

PCI slot

Connecting WoL Cable (Optional)

This is an optional function. Proceed with the installation if your computer

supports Wake On LAN and that you wish to use this function. Refer to your

motherboard user’s guide for more information.

1. Follow the steps in the Hardware Installation section to turn off the

computer and make sure the adapter is fully seated in the PCI slot.

2. One end of the WoL cable should already be connected to the adapter.

Connect the other end to the 3-pin WoL connector on the computer

motherboard.

3. Replace the computer cover.

B. Hardware Connection

The following table describes the types of network cable used for the different

connection speeds.

SPEED NETWORK CABLE TYPE

10 Base-T 100Ω2-pair UTP/STP Category 3, 4 or 5

100 Base-TX 100Ω2-pair UTP/STP Category 5

1000 Base-T 100Ω4-pair UTP/STP Category 5

Cable length between connections must not exceed

100 meters (328 feet).

Connect one end of the Ethernet cable to the adapter and the other end to a

switch/hub or computer. Then check the LEDs.

Panel LEDs

The LED indicators give real-time information about the status of the adapter.

LED COLOR STATUS DESCRIPTION

100 Green On The port is operating at 100Mbps.

Off The port is operating at 10Mbps when the

1000 LED is also off.

1000 Green On The port is operating at 1000Mbps.

Off The port is operating at 10Mbps when the

100 LED is also off.

FDX/COL Green On The port is operating in full-duplex mode.

Blinking Packet collision occurred on this port.

Off This port is operating in half-duplex mode.

LNK/ACT Green On The port is connected to a network.

Blinking The port is receiving or transmitting data.

Off The port is not connected to a network.

C. Hardware Configuration and Diagnostics

The default hardware configuration of the adapter has been designed to work

right out of the box.

Use the Diag32.exe program in the Installation Disk to set up the adapter

hardware configuration for your network needs and/or perform diagnostics.

Run the program under pure DOS command prompt window.

D. Driver Installation

Follow the instructions in the readme files for your operating system on the

Installation Disk to complete the driver installation (you may need your

Windows CD).

Troubleshooting

PROBLEM CORRECTIVE ACTION

Windows does

not auto-detect

the adapter.

Turn off the computer and make sure the adapter’s

contacts are fully seated in the slot and secured to the

computer with a bracket screw.

Perform a hardware scan by clicking Start, Settings,

Control Panel and double-clicking Add/Remove

Hardware. (Steps may vary depending on the version

of Windows). Follow the on-screen instructions to

search for the adapter and install the driver.

Install the adapter in another computer. If the error

persists, you may have a hardware problem. Contact

your local vendor.

The adapter is

not working

properly.

Update/Upgrade the driver. Refer to the readme files

on the diskette.

Check for possible hardware conflicts in the Device

Manager window.

Install the adapter in another computer. If the problem

persists, you may have a hardware problem. Contact

your local vendor.

The LNK/ACT

LED does not

light up when

connected.

Verify that the attached device(s) is turned on and

properly connected.

Make sure the network adapters are working on the

attached devices.

Verify that proper network cable type is used and its

length does not exceed 100 meters. For more

information on network cable types, see the B.

Hardware Connection section.

Tabla de contenidos

Otros manuales de Adaptador de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications AG-220 Manual de usuario

ZyXEL Communications

ZyXEL Communications G-470 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyAIR B-420 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyAIR G-405 Manual de usuario

ZyXEL Communications

ZyXEL Communications NWD2205 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-400 Manual de usuario

ZyXEL Communications

ZyXEL Communications WPA-1000 Manual de usuario

ZyXEL Communications

ZyXEL Communications PLA5456 Manual de usuario

ZyXEL Communications

ZyXEL Communications PLA450 Series Manual de instrucciones

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Manual de usuario

ZyXEL Communications

ZyXEL Communications PLA-402 V2 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyAIR G-200 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Manual de usuario

ZyXEL Communications

ZyXEL Communications AG-220 Manual de instrucciones

ZyXEL Communications

ZyXEL Communications G-210H Manual de usuario

ZyXEL Communications

ZyXEL Communications OMNIMPRI Instrucciones de uso

ZyXEL Communications

ZyXEL Communications Prestige P-2002 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications WM5204Z Manual de usuario

ZyXEL Communications

ZyXEL Communications PLA-4 series Firmware Detection Tool Release... Manual de usuario

ZyXEL Communications

ZyXEL Communications NWD7605 Manual de usuario

ZyXEL Communications

ZyXEL Communications PLA4215 Manual de usuario

ZyXEL Communications

ZyXEL Communications PowerLine PLA-402 Manual de usuario

ZyXEL Communications

ZyXEL Communications G-202 Manual de usuario

ZyXEL Communications

ZyXEL Communications G-302 V3 Manual de instrucciones

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario