ZYGO S2000 Manual de usuario
FREEVIEW SATELLITE HARD DRIVE RECORDER
MODEL: S2000
YOUR USER MANUAL
ENHANCE
YOUR TV
CONTROL
WHAT YOU WATCH
Welcome
Thank you for choosing this ZYGO HDD Satellite TV Recorder.
Not only can it receive over 15 subscription free channels, but you
can record two channels at a time. You can also pause and rewind
live TV and play it back at a time that suits you.
It’s really simple to use; it’s all done using the clear, easy to understand on screen menus
which are operated from the remote control. It even has a reminder function so that you
won’t miss your favourite programmes.
2
The illustrations and screen shots shown in this instruction manual are for reference and
instruction purposes only, and may not exactly match the product.
Freeview and the Freeview logo are registered trademarks and the Freeview logo is copyright of
Freeview TV NZ.
A Freeview Satellite Set Top Box gives
you access to over 15 freeview channels,
covering the best of TV and more.
For more information on Freeview,
please visit www.freeviewnz.tv
This product is capable of receiving and
decoding Dolby Digital Plus.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
This unit has an HDMI connector so you
can watch high denition TV via an HDMI
lead when connected to a HD Ready TV.
HDMI, the HDMI logo and High-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
Your HD recorder.............4
Your remote control........5
Connecting up..................6
7Getting started..................
Daily use..............................8-9
The EPG..............................10-11
The library window........12-14
The channel list...............15-16
The settings menu.............17-19
Add manual channels...... 20
21Information screen...........
Help and advice.................
Safety..................................... 24
Technical specications. 25
Guarantee............................ 26
Contents
Your new HD Digital TV Recorder
2 x AAA Batteries
HDMI Cable
Quick Start Guide
Remote control
3
What’s in the box?
01
02
03
04
05
09
11
12
06
13
07
08
14
15
10
For later use......................... 27
16
22-23
2x Short F Lead 2-Way Splitter
Manual
Your HD digital TV recorder
Front view
Rear view
01
TV SCART Standard denition
SCART output for connection
to a non HD TV.
SAT IN 1 and 2
Signal In from LNB
on satellite.
HDMI High
denition output.
SPDIF Digital audio
out (connection to
a surround sound
system).
ETHERNET Connection to a
network.
USB Update via USB.
STANDBY Power On /
Standby.
Standby Mode - Power LED is red when in standby mode.
On Mode - Power LED is green when powered on.
4
DC12V-2A Power Supply
Unit connection.
Recording LED - LED is solid red when recording is going.
Remote LED - LED ashes when recording is not going
and remote is used.
Your remote control 02
5
STANDBY Power On/Standby.
HOME Exits all menus and goes
back to live TV.
WIDE Adjust the aspect ratio of the
video output (SCART only).
MENU Opens the main menu.
FAST REWIND
BACK Takes you back to the
previous menu.
AD Turns audio description
On or O.
SUB Turns the subtitles On
or O.
VOL + Volume up.
VOL - Volume down.
STOP
MUTE Turns the volume On
and O.
HDMI Switches between
the available HDMI output
resolutions.
CH LIST Opens the channel
list menu.
SWAP Return to the previous
selected channel.
GUIDE Opens the guide.
LIBRARY Opens the library screen
where your recordings are stored.
FAST FORWARD
NAVIGATION Move up/down/left/
right in menus/on screen displays
OK Conrm selection in
menu/on screen displays.
RECORD Used to record a
programme and schedule
recordings.
INFO Display the Info bar.
P+ Channel up.
P- Channel down
NUMBER PAD Enter values and
select the channel number
directly by entering it’s number.
EXIT Closes menu.
COLOURED BUTTONS For
interactive use and
navigating menus.
TEXT Displays digital text
when available.
AUDIO Opens the audio menu.
PLAY / PAUSE
SYNC Adjusts picture/audio
synchronisation.
Connecting up
HDMI Cable
RG6 Cable from Satellite Dish
Getting connected
Connecting to a TV
Connect 2-Way Splitter (in box) to the end of the Satellite Cable that comes from your Dish,
use the “IN” connection on the Splitter. Connect the two RG6 F Type Cables (in box) to the
“OUT” connections on the Splitter. The opposite ends of each cable connect to the ‘SAT IN1’
and ‘SAT IN 2’ sockets on the back of your unit. (Connections should be nger tight only)
Connect the HDMI cable that came with your ZYGO S2000 between the ‘HDMI’ socket on
the back panel of your unit and a HDMI socket on your TV.
Other connections
Scart connection to a standard denition TV*
SPDIF connection to a surround sound system
* It is not possible to view programmes in high denition when using a scart connection.
03
6
USB connection for upgrades
2-Way Splitter RG6 F Type Cable
Getting started
Putting in the batteries
Open the battery cover of the remote control and put
two AAA size batteries so that the ‘+’ and ‘-’ marks
on the batteries match the ‘+’ and ‘-’ marks inside the
remote control. Replace the battery cover.
1
04
7
Switch your TV on and select the correct
video input.
Switch the ZYGO S2000 on and wait for it
to boot up.
Plug in and switch on
The rst time install screen
Step 1 - Select your TV screen size.
Step 2 - The Signal Check screen, your unit
will automatically detect what frequency is
required (if dish is setup correctly), if strength
is above 50%, press [OK] to move on*.
Step 3 - Select your Region,
Step 4 - The Channel Scan will begin.
Step 5 - Will ask you to enter a 4-digit PIN of
your choice, re-enter to conrm it.
*If signal strength is below 50% there may be an issue with your setup, please call
0800 ZYGO TV (0800 994 688) for Technical Support in diagnosing the issue, before
returning to the store.
Daily use
We have divided this book into separate
sections, so that you can nd the information
you are looking for more easily. This section
covers the day to day functions that you will
use most often.
Changing the channel
Press the [GUIDE] button on the remote
control to open the Electronic Programme
Guide.
Use the [ ] and [ ] buttons to select dierent
channels.
When you have chosen your channel, press
the [OK] button to watch it.
You can also select the channel you want
to watch by using the [P+] and [P-] buttons
on the remote control. Alternatively you can
use the number buttons to key in the
channel number.
When you change the channel the
information banner will be displayed for a
few seconds.
This shows the details of the current show.
The information bar
If you want to see information about the
programme you are watching, you can press
the [INFO] button.
DON’T FORGET! If you want to record
a programme, you can just press the
[REC] button.
05
8
Changing the volume
You can change the volume using the [VOL+]
and [VOL-] buttons on the remote control.
You can turn o the audio by pressing the
[MUTE] button, to turn it back on press the
[MUTE] button again.
Audio description
Audio description is an additional narration that
describes all signicant visual information such
as body language, facial expression, scenery,
costumes - anything that is important to the plot
of the story, event or image.
Press the [AD] button to use this setting or not.
DON’T FORGET! Not all programmes
have audio description available.
Audio channel
DON’T FORGET! Not all programmes
have additional audio languages
available.
Daily use
Subtitles
Press the [SUB] button to toggle subtitles
on and o.
DON’T FORGET! Not all programmes
have subtitles. You can use the Info
bar to see if the ‘SUB’ icon is shown.
-0 min
To stop time shifting mode and go back to Live
TV, press the [ ] button.
Pausing live TV
This function is sometimes referred to as time
shifting, and is very useful if you are watching
a programme and the phone rings.
DON’T FORGET! You can rewind a show
that you are recording/ time shifting at
any time by pressing the [ ] button.
To pause live TV, press the [ ] button on the
remote control.
Daily use 05
9
Sometimes dierent audio languages are
available with certain programmes or
channels.
Press the [Audio] button to see the
available languages.
Use the [ ] and [ ] buttons to select a
dierent audio channel. Press [OK] to
conrm the setting. The time counter will start, and shows the
amount of time that the programme has
been paused.
To continue watching TV, press the [ ]
button again and the programme will begin
again from where you left o. It will count
down the time left before you resume Live TV.
You can fast forward and fast rewind using
[ ] and [ ] buttons. The speed and direction
are shown on the screen. To change the speed
press the [ ] and [ ] buttons.
-8 mins
X4
06
10
You can open the guide window by pressing
the [GUIDE] button on the remote control.
The guide shows you all of the programmes
and channels available for the next 8 days.
Use the [ ] and [ ] buttons to select dierent
channels. Use the [ ] and [ ] buttons to select
each programme. You can use the [P+] and
[P-] keys to move a page at a time.
With the S2000 it’s easy to record just select
the programme and press the [RED] button.
The [YELLOW] button will allow you to jump
ahead to Next Week (7 days forward) to view
what’s on. Similarly the [BLUE] button shifts
to the Next Day (24 hours forward).
When you have chosen your channel press
the [OK] button to watch it, and the EPG will
disappear shifting you to that channel
selected.
The EPG
Navigation Guide icons
Start a recording from the
EPG.
View whats on a week from
today.
View whats on the Next
Day at the same time.
Move up and down the list
of programmes.
Change channel you are
viewing.
Watch TV, you will go to
channel you have chosen.
What’s on Now/Next list
for all channels.
OK
GUIDE
Tabla de contenidos
Manuales populares de Sistema de televisión por satélite de otras marcas
DefineSat
DefineSat VM55 Manual de usuario
Dish Network
Dish Network 112182 Manual de usuario
Thrane&Thrane
Thrane&Thrane sailor 60 Manual técnico
KVH Industries
KVH Industries TracVision L2 Manual de usuario
KVH Industries
KVH Industries TracVision TV1 Manual de usuario
JRC
JRC NJT8304 Series Manual de usuario
Bell
Bell EXPRESSVU Manual de usuario
Promax
Promax SATHUNTER Manual de usuario
SatKing
SatKing PRO MAX Manual de usuario
KVH Industries
KVH Industries TracVision M5 Manual de usuario
KVH Industries
KVH Industries TracVision R5SL Manual de usuario
Dish Network
Dish Network Satellite Television Manual de usuario