Zte MF65M Manual de usuario
1
MF65M
Quick Start Guide
1
1
Getting to Know Your Device
Appearance
The following gure is for your reference only.
1. Indicator lights
2. Power key
3. WPS key
4. Charging/micro-USB jack
5. (U)SIM card slot
6. microSDHC card slot
NOTE:
microSDHC™ logo is a trademark of SD-3C,
LLC.
2
Getting to Know Your Device
Indicators
When the device is powered on, the following icons
may be lighting. For a description of the icons, refer to
the following table.
Indicator Status Description
Network
Red solid
Error status. Not reg-
istered to the mobile
network, no (U)SIM card
inserted or no network
service available.
Green solid Registered to the mobile
network.
Green
blinking
Connected to the mobile
network and data is
being transferred.
Wi-Fi
Blue solid Wi-Fi is active.
Blue blinking WPS is active.
Off Wi-Fi is off or your
device is in sleep mode.
3
Getting to Know Your Device
SMS
Blue solid You have unread
messages.
Blue blinking
You have new
messages or the mes-
sage storage is full.
Off No unread messages.
Battery
Red solid /
blinking
The battery is low.
Please charge the
battery.
Green blinking
The battery is being
charged or in standby
mode.
Green solid The battery level is
middle or high.
Off
Your device is not being
charged on the power
off status, or the battery
is not inserted.
4
Getting to Know Your Device
Connection Scenarios
The device can access the Internet and it allows
multiple clients to surf on the Internet at the same time.
The following gure is for your reference only.
• 3G Mode: A (U)SIM card can be used to access
the Internet.
• Internet Wi-Fi Mode: Your device can be connect-
ed to a WLAN device (such as a hotspot device or
wireless router) through Wi-Fi to access the Inter-
net. The WLAN device must be already connected
to the Internet.
NOTE: Your device and the WLAN device must be
in different subnets.
5
Installing Your Device
1. Slide the back cover and remove it.
NOTE: Do not remove the cover rudely.
2. Install a (U)SIM card to the (U)SIM card slot.
WARNING!
Your device does not support micro-SIM cards, nano-SIM
cards or any other non-standard SIM cards. To avoid
damaging the device, do not use those cards or any card
holders.
6
Installing Your Device
3. Install the microSDHC card if necessary.
4. Install the battery.
5. Close the back cover.
7
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Make sure your computer or other client devices
have enabled Wi-Fi, and search for available
wireless networks.
NOTE:
Refer to your Wi-Fi-enabled client device manual for
further details on how to search for wireless networks.
If you use a computer, you need to set your computer
to obtain an IP address automatically.
3. Select the Wi-Fi name (SSID) of your device, and
click Connect.
4. Enter the Wi-Fi password if necessary, and click
OK.
NOTE:
Refer to the chapter Getting to Know the Wi-Fi SSID
and Password on page 8 to get the default Wi-Fi SSID
and password.
5. Wait until the client device is connected to your
device successfully.
8
Connecting to Your Device
Using a USB Cable
1. Connect a computer to your device with a USB
cable.
2. Power on your device. The operating system de-
tects and identies new hardware, and automati-
cally installs the hardware.
NOTE:
If the system does not automatically launch installation,
you can double-click the device installation icon in
My Computer > ZTEMODEM to install the software.
3. Wait until the computer is connected to your device
successfully.
Getting to Know the Wi-Fi SSID and
Password
Open the back cover, you can view the label on the
device to get the default Wi-Fi SSID and password.
Otros manuales para MF65M
5
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de Zte
Zte
Zte 802ZT Manual de usuario
Zte
Zte MF608 Manual de usuario
Zte
Zte ZXR10 3800-8 Manual de usuario
Zte
Zte ZXHN H167A Manual de usuario
Zte
Zte W200A Manual de usuario
Zte
Zte SD6200 Instrucciones originales
Zte
Zte ZXV10 W811N Manual de usuario
Zte
Zte MF60 Manual de usuario
Zte
Zte ZXV10 W615 Manual de usuario
Zte
Zte W800A Manual de servicio
