Zte ZTEC321 Manual de usuario
ZTEC321
CDMA 1X Digital Mobile Phone
User Guide
Copyright © 2007 by ZTE Corporation
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any
form or by any means, electronic or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make
modifications on print errors or update specifications without prior notice. The
information on the package is only for your reference. Images are for you reference only.
Please check the product model before purchasing.
----------------------------------------------------------------------------------------------------------
ZTE Corporation
ZTE Plaza,，Keji Road South, Hi-tech Industrial Park, Nanshan District, Shenzhen, P.R.China
Zip Code:518057 Http://www.zte.com.cn Service Hotline:+86-755-26779999
Declaration
We, ZTE Corporation, declared that:
The product is installed with battery separately in the box. The
FCC ID label is placed on the mobile phone clearly visible to all
persons at the time of purchase.
The user is cautioned that changes or modifications not expressly
approved by the manufacturer could void the user’s authority to
operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Do not attempt to disassemble the mobile phone and battery by
yourself. Non-expert handling of the devices may damage them.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government. These limits are part
of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age or
health. The exposure standard for wireless fixed phoned employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limits set by the FCC are 1.6W/kg. Tests for SAR
are conducted using standard operating positions accepted by the
FCC with the phone transmitting as its highest certified power level
in all tested frequency bands. Although the SAR is determined at
the highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station, the lower the
output power.
The Highest SAR Values for this model phone when tested for use
on the Head was 0.295 W/Kg, on body was 0.193 W/Kg.
Know your Phone
Earpiece
LCD screen
Scroll key
(Up/Down/Left/Right/OK)
Left select key
Send key
0~9 Number key
* key
Microphone
Right select key
End key
# key
Charger connector
Key Instruction
Key Function Description
Make or answer a call.
PressSend key in standby mode to enter all calls list.
PressSend key two times directly to redial the last number.
End an active call or reject a call.
Long press to Power on/Power off.
Exit from any interface to standby mode.
Enter main menu in standby mode.
Switch to the options of left bottom submenu.
Enter Names menu in standby mode.
Switch to the options of right bottom submenu.
Enter main menu in standby mode.
Press OK key to confirm the commands and options selected.
Confirm the character chosen while character inputting.
Up/Down Key.
Scroll the cursor up and down.
Used as selection key up and down for keying in commands
and selecting options shown on the display.
In standby mode, press Down key to enter Ring menu, press
Up key to enter Messages menu.
Used as direction key in games.
Left /Right Key
Scroll the cursor left and right.
Used as selection key to scroll cursor left and right for keying
in commands and selecting options shown on the display.
In standby mode, press Left key to enter ToolKit menu, press
Right key to enter Games menu.
Adjust volume in conversation.
Used as direction key in games.
Key in numbers or characters.
Make a Speed Dial call.
Hold 0 key to input + in standby mode.
# key:
Hold # key in standby mode to enable/disable vibration.
Press # key to select text mode.
* key:
Hold * key in standby mode to lock phone’s keypad.
Press * key once to enter Symbols mode in text input mode,
press * key twice to enter template message.
Interface Icons
Icon Indication
Signal strength
Roaming
New voice message
New message
New urgent message
Ringer with vibration
Keypad locked
Vibration
Earphone
Silence All
Alarm
Power indicator
Installing the Battery
The attached Li-ion battery along with the phone can be
used after unpacking. For the first three times, please use up the
power and charge it fully for a new battery to perform well.
Remove: (1) Press and push the back-cover of the phone down
to release and remove it off the phone. (2) Put finger on the
side finger grips, and then lift up the battery from the finger grips
to remove the battery.
Installation:(1) Replace the battery into the battery slot, to be
noted that the lower end of the battery firstly inserted. (2) Put the
back-cover of the phone flatly upon the body of phone. Direct
the back cover towards the locking catches on the both sides of
the phone and push the back-cover of the phone upward to lock
the cover into its place.
ChargetheBattery
Plug out rubber away from the jack
on the bottom of the handset and
connect the lead from the charger
to the socket on the bottom of the
phone. (Note: The side with arrow
should be upright while connecting).
Connect the charger to a standard wall AC socket.
When the charging indicator on the screen stops flopping,
the charging is completed. The charging takes usually up
to 2～3 hours. In the process of charging, it is a normal
phenomenon that the battery, phone and charger get into
hot accordingly.
After the completion of charging, disconnect the charger
from the phone and AC socket.
Poweron/offYourPhone
Please hold End key to power on/off the phone. The phone
will automatically search for the network.
Besides sending and receiving calls, you can also do:
¾Press Left select key/Ok key to enter Main menu.
¾Press Up key to enter Messages menu.
¾Press Down key to enter Ring menu.
¾Press Left key to enter ToolKit menu.
¾Press Right key to Games menu.
¾Press Send key in standby mode to enter All Calls list.
¾Hold # key in standby mode to enable/disable Vibration
mode.
¾Hold * key in standby mode to lock the keypad.
¾Press Right select key to cancel option, exit to previous
pop-up window.
¾Press End key to exit to standby mode.
Note: To “press” key in this manual means to press the key
and release it. To “hold” key means to keep pressing the key for
two seconds or more.
Making and Answering a Call
¾Making a call
Enter the phone number
Press Send key to make the call.
Press End key to end the call.
¾Answering a call
Press Send key to answer the call.
Press End key to end the call.
MenuTree
1. Messages
1.1 New SMS
1.2 Inbox
1.3 Outbox
1.4 Msg Settings
1.5 Voice Mail
2. Names
2.1 View details
2.2 Send message
2.3 Add new entry
2.4 Edit
2.5 Delete
2.6 Delete all
2.7 Search
2.8 Edit group
2.9 Other options
3. Call History
3.1 All Calls
3.2 Received Calls
3.3 Dialed Calls
3.4 Missed Calls
3.5 Clear All
3.6 Call timers
4. ToolKit
4.1 Calendar
4.2 Alarm clock
4.3 Calculator
4.4 Voice Memo
4.5 Stopwatch
5. Settings
4.1 Sound
4.2 Display
4.3 Call Setting
4.4 Security
4.5 Extras
6. Games
6.1 Brick attack
6.2 Push Box
TextInput
Your phone offers text input modes: Multitap Input
(abc/ABC), Numbers Input (123), eHiText Input (eng), and
Symbol Input (Symbols).
Operation Method
Input Letters Multitap (abc/ABC)
Input—“abc/ABC” press
Tabla de contenidos
Otros manuales de Teléfono de Zte
Zte
Zte Z861BL Manual de usuario
Zte
Zte Z723EL Manual de usuario
Zte
Zte WP657 Manual de usuario
Zte
Zte Fanfare 2 Manual de usuario
Zte
Zte WP658A Manual de usuario
Zte
Zte WP623H Manual de usuario
Zte
Zte N818S Manual de usuario
Zte
Zte MO-01J Manual de usuario
Zte
Zte Grand X In Manual de usuario
Zte
Zte WP228+ Manual de usuario
Zte
Zte WP560C Manual de usuario
Zte
Zte WP228+ Manual de usuario
Zte
Zte WP805 Manual de usuario
Zte
Zte Imperial N9101 Manual de instalación
Zte
Zte Z2321A Manual de usuario
Zte
Zte WP659+ Manual de usuario
Zte
Zte Z6251V Manual de usuario
Zte
Zte WP657+ Manual de usuario
Zte
Zte Consumer Cellular Manual de usuario
Zte
Zte A2022PG Manual de usuario
