Zte Blade A7 2020 Manual de usuario
Quick Start Guide .................................................................. 1
Kurzanleitung .......................................................................16
Hızlı Başlangıç Kılavuzu.....................................................32
Guía de inicio rápido..........................................................47
Guia de início rápido..........................................................62
1
ZTE Blade A7 2020
Quick Start Guide
2
LEGAL INFORMATION
Copyright © 2019 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form or by
any means, electronic or mechanical, including
photocopying and microlm, without the prior
written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modications on print errors or update specications
in this guide without prior notice.
We oer self-service for our smart terminal device
users. Please visit the ZTE ocial website (at
www.ztedevices.com) for more information on self-
service and supported product models. Information
on the website takes precedence.
Visit http://www.ztedevices.com to download
the user manual. Just click Support from the home
page and then select the location, product type, and
name to search for related support information.
Disclaimer
ZTE Corporation expressly disclaims any liability
for faults and damages caused by unauthorized
modications of the software.
Images and screenshots used in this guide may
dier from the actual product. Content in this guide
may dier from the actual product or software.
3
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by ZTE Corporation is under
license.
microSDXC Logo is a trademark of SD-3C,
LLC.
Other trademarks and trade names are those of their
respective owners.
Version No.: R1.0
Edition Time : November 4, 2019
4
Getting to Know Your Phone
Earpiece Light sensor
Indicator light
Proximity sensor
Volume key
Power key
Headset jack
Fingerprint sensor
Front camera
Touch screen
Microphone
Back cameras
Flash
Speaker
Charging/ micro-
USB jack
nano-SIM/
microSDXC card tray
5
Setting Up Your Phone
The nano-SIM cards can be installed or removed
while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other
kind of SIM cards, or any non-standard nano-SIM
card cut from a SIM card. You can get a standard
nano-SIM card from your service provider.
1. Insert the tip of the tray eject tool into the hole
on the card tray.
2. Pull out the card tray and place a nano-SIM card
in slot 1 and a microSDXC card (optional) or
a nano-SIM card in slot 2, as shown. Carefully
slide the tray back into place.
Slot 2
Slot 1
6
NOTE:
When two nano-SIM cards are installed, both cards
can connect to the 4G, 3G, or 2G network, and either
card can be used for mobile data.
Charging the Phone
Your phone’s battery should have enough power for
the phone to turn on, nd a signal, and make a few
calls. You should fully charge the battery as soon as
possible.
WARNING!
Use only ZTE-approved chargers and USB cables.
The use of unapproved accessories could damage
your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause re or explosion.
7
1. Connect the adapter to the charging jack.
Ensure that the adapter is inserted in the
correct direction.
2. Connect the charger to a standard AC power
outlet.
3. Disconnect the charger when the battery is
fully charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged.
In this case, try again after charging the phone for
at least 20 minutes. Contact the customer service if
you still cannot power on the phone after prolonged
charging.
8
Powering On/O Your Phone
Make sure the battery is charged before powering
on.
• Press and hold the Power key to turn on your
phone.
• To power o, press and hold the Power key to
open the options menu, and touch > .
NOTE:
If the screen freezes or takes too long to respond,
try pressing and holding the Power key for about 10
seconds to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode
when it is not in use for some time. The display is
turned o to save power and the keys are locked to
prevent accidental operations.
You can wake up your phone by turning on the
display and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a face verication, a ngerprint, an
unlock pattern, a PIN or a password for your phone,
you’ll need to use your face or ngerprint, draw the
pattern, or enter the PIN/password to unlock your
screen.
Otros manuales para Blade A7 2020
1
Tabla de contenidos
Idiomas:
Otros manuales de Teléfono de Zte
Zte
Zte Consumer Cellular Manual de usuario
Zte
Zte ZTE-C F451 Manual de usuario
Zte
Zte WP806A Manual de usuario
Zte
Zte MO-01J Manual de usuario
Zte
Zte Imperial N9101 Manual de instalación
Zte
Zte Grand X In Manual de usuario
Zte
Zte WP805 Manual de usuario
Zte
Zte Z2321A Manual de usuario
Zte
Zte WP750 Manual de usuario
Zte
Zte WP659+ Manual de usuario
Zte
Zte Z6251V Manual de usuario
Zte
Zte N9517 Manual de usuario
Zte
Zte WP228+ Manual de usuario
Zte
Zte WP228+ Manual de usuario
Zte
Zte ZTE-J G500 Manual de usuario
Zte
Zte Grand X Max+ Manual de usuario
Zte
Zte ZTEC321 Manual de usuario
Zte
Zte Z723EL Manual de usuario
Zte
Zte WP626 Manual de usuario
Zte
Zte WP560C Manual de usuario
