Zte MF636 Guía de configuración

ZTE Rogers

MF636 USB Modem

Quick Start User Guide

www.ztecanada.com

© ZTE Corporation, 2008.

-1-

1. Insert the SIM Card into the modem

The SIM slot is located above the

USB connector

Before using the modem make sure the SIM

card supports data services. Insert the SIM

card as shown with the gold contacts facing

down and the beveled edge on the left hand

side.

Push the SIM card in as far as it will go.

2. Connect the USB modem to your PC

Connect the modem to your PC’s USB port directly. You may alternatively use the

supplied USB cable. In most cases the single cable should suffice. However, to

increase the power delivered to the modem, use the double USB cable if required.

After the modem is connected, your PC will launch the installation application

software automatically.

Note: If your security settings preventAutorun then you will have to start the process

manually. Navigate to the CDROM and double click the Autorun.exe file to start the

software installation

-2-

3. First Time Software Installation

Select your language and click OK.

-3-

First Time Software Installation Continued…

Click Next to continue.

-4-

First Time Software Installation Continued…

Read the license agreement, select I accept the terms of the license agreement

and press Next.

-5-

First Time Software Installation Continued…

Click Next to accept the default installation location or press Change to specify your

own path.

-6-

First Time Software Installation Continued…

The wizard will take a few minutes to install software. Click Finish to complete.

-7-

4. Using your Modem

Connect your modem to the computer. Your computer will launch the Connection

Manager application automatically. The modem will initialize and the main user

interface will appear.

-8-

Using your Modem Continued…

Click the Internet button and then click Connect to establish a connection to the

internet.

5. Removing the Modem Safely

Please close the application software first, use the Safe Hardware Removal

procedure and then pull out the modem or USB cable.

-9-

6. LED Indicator

LED Indicator USB Modem Working Status

Yellow Power on. Not registered on the 2G or 3G network

Green Solid Registered on the 2G network.

Green blinking Active data transfer on the 2G network

Blue solid Registered on the 3G network.

Blue blinking Active data transfer on the 3G network.

Red solid Roaming status

Red blinking Active data transfer in roaming status

7. Functions & Operation

Connects to the internet.

Messages Interface

View your Contacts

Opens the Rogers Home Page

Change system settings

View the Help file

-10-

Otros manuales para MF636

5

Tabla de contenidos

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario

Zoom

Zoom 1070 Series Manual de usuario

Aztech

Aztech HW831 Manual de usuario