7
Step 2: Add the Alarm Hub to the App
1. Plug the alarm hub into the power socket using the provided power
adapter and USB cable.
2. Turn on the power switch. Wait for a few seconds until the blue LED
begins to blink rapidly, indicating that Pairing Mode is active.
Note: If the device doesn't display the above status, press and hold the
CODE Button until you hear six-beep sound prompt, and then release it,
the blue LED will blink rapidly.
Step 3: Add the Sensors to the App
1. To turn on the sensors, insert the two LR03(AAA) batteries provided.
2. Enter the device interface on the App, and then tap the “Accessories”
button.
3. Enable Bluetooth and Wi-Fi permissions on your smartphone.
4. Open the app, tap the "+" button on the top right corner of the
interface, and then select the “Add Device” option.
5. Tap the "Add" button once the device has appeared. Follow the on-
screen prompts to pair the device automatically.
Note: If you have failed to connect your device to Wi-Fi, press and hold the
CODE Button until you hear six-beep sound prompt, and then release it,
the blue LED will blink rapidly, then repeat the above steps.
3. Tap the "+" button to trigger the alarm hub to enter the pairing mode.
