Zippity ZP19002 Manual de usuario
WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY
INSTRUCTIONS ZP19002
WWW.ZIPPITY-OUTDOOR.COM
VER. 042921
ZP19002
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
NEWPORT
VINYL PICKET
FENCE WITH POST
PIPE ANCHOR KIT
Finishing Post
Kit (ZP19003)
sold separately.
WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY
INSTRUCTIONS
ZP19002
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you
our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
704-892-5222 /877-234-6196
Customer service agents are available to take calls weekdays from 8am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19002
on page 5. It is helpful if you can provide the batch lot which is a
stamped number on the end of the box.
this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please
return the product, you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY
INSTRUCTIONS ZP19002
1.
2.
3.
4. O
5. If your yard is steeply pitched or is very uneven, you may need to stair-step your panels as
illustrated below. Post heights can be trimmed down as necessary.
Warning:
this fence. Your post will not be long enough to accommodate this slope.
minimize the gap on the lower side.
TIPS:
WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY
INSTRUCTIONS
ZP19002
Ground
70 3/8 in
72 in
2 in
2 15/16 in
68 1/2 in
6 in
18 1/2 in
24 in
4 in
36 in
33 1/2 in
22 7/8 in
3 in
20 3/4 in
WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY
INSTRUCTIONS ZP19002
STEP 1:
LAY OUT MATERIALS
A B
ED
G H
F
C
Note: Top rail
has picket
holes on both
sides.
Picket (11)
⅞” x 3” x 29¾”
Post (1)
2” x 3½” x 38⅝”
Top Rail (1)
1½” x 3½” x 68¼”
(1)
1½” x 3½” x 68¼”
Pipe Anchor (1)
1⅝” x
44¾” ¾” Self-Drilling Stainless Steel Screw (24)
Rail Bracket (4)
Post Cap (1)
WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19002
Try and drive the pipe anchor as level as possible. Check level
is usually established, and you cannot manually pull the pipe back
to make it level.
BEST
anchor into the ground:
GOOD
BETTER
Hammer
DO NOT USE
STEP 2:
INSTALL PIPE ANCHORS
STEP 2.1
(G)
G
STEP 2.2
Note: Check level
in both direcons.
WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS ZP19002
Orient the Post (C) correctly with tabs at the
top, and slide the post over the pipe anchor and
into the ground.
Using a wood block (or something to protect the
on the pipe anchor. Repeat for the second post.
around the base of the pipe anchor. This will
allow the post to easily insert itself into the
Step 3.1 is only to be completed if the
ground is hard.
70 ¼in.
72in.
STEP 3:
INSTALL POST OVER PIPE ANCHOR
C
STEP 3.1 STEP 3.2
STEP 3.3
STEP 2.3
WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19002
1.
out of the post.
2. Remove the vinyl burrs from the post and screw.
3. Slowly drive the screw with force into the pipe anchor.
1. Use a level to straighten the post.
2. Drive a second hex head tek screw into the top of the post using
Adjust unl level.
3
Step 4 is only to be completed if you are concerned that
someone may pull your fence posts out of the ground.
STEP 4
SECURE POST TO PIPE ANCHOR
1 2 3
1 2
Top View
STEP 4.2
STEP 4.1
WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS ZP19002
Slide another rail bracket
over the opposite end of the
(F), and slide
the rail bracket installed in
F
Install one Rail Bracket
(D)
Self-Drilling Stainless Steel
Screws (H). The rail bracket
STEP 5:
INSTALL FENCE PANEL
STEP 5.1
D
H
STEP 5.2
WWW.ZIPPITY-OUTDOOR.COM
10
ASSEMBLY
INSTRUCTIONS
ZP19002
determine where to install the opposing rail
bracket, and mark the height.
self-drilling stainless steel screws.
rail bracket as illustrated below, and install
the top rail brackets.
in order to align the pickets, and slide the Top Rail
(E)
stainless steel screws to secure brackets to
both rails.
STEP 5.3 STEP 5.4
E
STEP 5.5 STEP 5.6
Otros manuales para ZP19002
1
Otros manuales de Cercas y portones de Zippity
Zippity
Zippity BELLA ZP19070 Manual de usuario
Zippity
Zippity Highland Manual de usuario
Zippity
Zippity Newport Vinyl Picket Gate Manual de usuario
Zippity
Zippity Madison Gate Kit w/ Fence Wings Manual de usuario
Zippity
Zippity ALL AMERICAN PRIVACY SCREEN Manual de usuario
Zippity
Zippity LIBERTY LATTICE ZP19053 Manual de usuario
Zippity
Zippity ZP19056 Manual de usuario
Zippity
Zippity WASHINGTON Manual de usuario
Zippity
Zippity ZP19026 Manual de usuario
Zippity
Zippity NEWPORT Manual de usuario
Zippity
Zippity WF29014 Manual de usuario
Zippity
Zippity WASHINGTON VINYL PICKET FENCE Manual de usuario
Zippity
Zippity ZP19055 Manual de usuario
Zippity
Zippity ROGER RABBIT Manual de usuario
Zippity
Zippity Madison Vinyl Picket Fence Kit 2-Pack Manual de usuario
Zippity
Zippity KESWICK ZP19060 Manual de usuario
Zippity
Zippity ZP19052 Manual de usuario
Zippity
Zippity Manchester ZP19018 Manual de usuario
Zippity
Zippity WF29006 Manual de usuario
Zippity
Zippity ZP19017 Manual de usuario
