Zinwell ZMT-620HD Manual de usuario
Digital Terrestrial Receiver
Quick Setup Guide - Zinwell ZMT-620HD
Step 1 –Connect your digital receiver
After unpacking your digital receiver, connect as shown in the diagram below.
Option 1: HDMI
This is the recommended set up.
Option 2: Composite
Option 3: Component
Step 2 –Start Auto Scan
Once you have the digital receiver connected, turn the power on. Please note the red
light indicates you are in standby so when there is no light the unit is “on”.
The receiver will take approximately 15-20 seconds to power up. To start tuning enter
Menu > Installation > Auto Scan
Step 3 –Enter Password
0 0 0 0
Step 4 –Select Country
New Zealand is highlighted. Select enter.
Step 5 –Tuning in Freeview Channels
A screen showing tuning progress will be displayed (see example below). It will tell you
that the digital receiver is automatically tuning in the Freeview channels. Tuning can take
a few minutes. You do not need to take any action during the tuning process.
And that’s it. You are now ready to enjoy the Freeview experience!
If you have any problems we recommend you check your aerial connection. If you still
can’t get a picture one of the installers listed on the installer directory on our website
should be able to help.
www.freeviewnz.tv
Tabla de contenidos
Otros manuales de Receptor de Zinwell
Zinwell
Zinwell ZWD-2500T Manual de usuario
Zinwell
Zinwell Freeview ZMX-7500 Guía de inicio rápido
Zinwell
Zinwell BV-2822T Manual de usuario
Zinwell
Zinwell WHD100 Manual de usuario
Zinwell
Zinwell Freeview ZMX-7500 Manual de usuario
Zinwell
Zinwell ZWD-2500T Manual de usuario
Zinwell
Zinwell ZWD-2500T Manual de usuario
