Zenmuse X5 Manual de usuario
ZENMUSE X5
V1.0
2015.10
User Manual
2
©2015 DJI. All Rights Reserved.
Using this manual
Legends
Warning Important Hints and Tips Reference
Before Flight
Read the following documents before using the Zenmuse X5:
1. Zenmuse X5 In the Box
2. Zenmuse X5 User Manual
3. Zenmuse X5 Safety Guidelines and Disclaimer
Check that all of the items are included in the package. We recommend that you watch all
tutorial videos on the official DJI website and read the Disclaimer and Safety Guidelines
before you y. Refer to the User Manual for more detailed information.
Watch the video tutorials
Please watch the tutorial videos at the link below, which demonstrates how to use Zenmuse
X5 safely:
http://www.dji.com/product/zenmuse-x5s/video
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to
begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
©2015 DJI. All Rights Reserved.
3
Contents
Using this manual 2
Legends 2
Before Flight 2
Watch the video tutorials 2
Contents 3
Product Prole 4
Overview 4
In the Box 5
Optional Accessories 5
Components 6
Getting Started 7
Read the information below before setting up your Zenmuse X5 7
Supported Devices 7
Supported Lenses for the Inspire 1 7
Supported Filters 7
Supported Micro SD Cards 7
Installing the Camera Lens 7
Mounting the Zenmuse X5 to the Inspire 1 9
Replace the Inspire 1 Gimbal Mounting Plate 9
Attach the Zenmuse X5 10
Mechanical Range 10
Operating the Camera 11
Camera Panel 11
Basic Shooting 11
Taking Photos 11
Recording Videos 11
Advanced Settings 12
Exposure Modes 12
Photo Styles 12
White Balance 12
List of Settings 13
Managing your Photos and Videos 14
Playback 14
Downloading your Files 14
Appendix 14
Specications 14
Status LED 16
4
©2015 DJI. All Rights Reserved.
Product Prole
Overview
The Zenmuse X5 offers advanced photographers a high-performance, robust gimbal and
camera system with an M4/3 interchangeable lens. The Type 4/3 CMOS sensor supports
video recording in 4K and 16MP still photos. It can be mounted onto designated DJI devices
such as the Inspire 1.
The Zenmuse X5 lens kit comes with the DJI MFT 15mm f/1.7 ASPH that provides a 72 degree
eld of view and a manually adjustable f/1.7-f/16 aperture range. The camera can shoot burst,
AEB or time-lapse in JPEG and DNG RAW, and output video in MP4 and MOV formats. Live
HD video from the camera can be viewed on your mobile device through the DJI GO app .
The 3-axis gimbal provides an incredibly stable platform for the camera to capture clear shots
even during high speed maneuvers. The gimbal tilts the camera across a -90° to +30° pitch
angle and pans a full 360 degrees, independent of its carrier’s movement.
ZENMUSE X5 User Manual
©2015 DJI. All Rights Reserved.
5
In the Box
Check that all of the following items are in your package. If any items are missing, please
contact DJI or your local dealer.
Lens Hood* ×1 16GB Micro SD Card ×1
Gimbal and Camera Body ×1
Inspire 1 Gimbal Mounting
Plate ×1
DJI MFT 15mm f/1.7 ASPH
Lens* ×1
Balancing Ring* ×1
Optional Accessories
The Zenmuse X5 can be mounted on the Inspire 1 aircraft with the following accessory which
is available on the DJI Store.
Manuals
ZENMUSE X5 In the Box
ZENMUSE X5 Disclaimer and Safety Guidelines
* The original lens, balancing ring and lens hood are only included in the Zenmuse X5 lens kit. Accessories for other supported
lenses can be purchased separately on the DJI Store.
ZENMUSE X5 User Manual
6
©2015 DJI. All Rights Reserved.
Components
Zenmuse X5 Gimbal and Camera
Pan Motor
Roll Motor
Tilt Motor
Gimbal Connector
Micro SD Card Slot/Micro USB Port
Lens Lock
Lens Mount Index
Lens Mount
Lens Release Button
Status LED
Dust Cover
46mm Lens Filter Thread
Lens Hood Thread
Aperture Ring
Focusing Ring
Lens Mount Index
AF/MF Switch
DJI MFT 15mm f/1.7 ASPH Lens
©2015 DJI. All Rights Reserved.
7
Getting Started
Read the information below before setting up your Zenmuse X5
Supported Devices
The Zenmuse X5 can be attached to the following device:
DJI Inspire 1
Supported Lenses for the Inspire 1
The Zenmuse X5 currently supports the following lenses, and will support more lenses in the
future.
DJI MFT 15mm f/1.7 ASPH
Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH
Olympus M.Zuiko Digital ED 12mm f/2.0
Olympus M.Zuiko 17mm f1.8 (Balancing ring will be available on the DJI Store soon)
Supported Filters
Filters must have a weight of 7-11 g, with those weighing 10-11 g performing the best.
Outside this range, the lter will decrease gimbal performance. DJI MFT 15mm f/1.7 ASPH
supports lters with a size of 46mm.
The Balancing Ring must be installed on the camera lens when a lter is not used.
Supported Micro SD Cards
The Zenmuse X5 comes with a 16GB Micro SD card, but also supports Micro SD cards with a
capacity of up to 64GB. We recommend using a UHS-1 Micro SD card to minimize the delay
when reading and writing high resolution video data.
DO NOT remove the Micro SD card from the Zenmuse X5 when it is powered on.
Installing the Camera Lens
The following steps use the DJI MFT 15mm f/1.7 ASPH as illustration of how to mount the
camera lens to the camera body. Be sure to power off the battery before installation.
1. Remove the camera body cap.
2. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.
3. Remove the lens cap and rear cap.
Lens Release Button
1
2
3
ZENMUSE X5 User Manual
8
©2015 DJI. All Rights Reserved.
4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the
camera lens into the body of the camera.
5. Rotate the camera lens clockwise until you hear a click.
6. Rotate the Lens Lock counterclockwise to lock it.
7. Mount the Balancing Ring (or a lter) and the Lens Hood.
8. Insert the Micro SD card.
To remove the camera lens, power off the battery and then:
1. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.
2. While holding down the Lens Release Button, rotate the camera lens counterclockwise to
detach it.
Lens Release Button
It is recommended to wrap the dust cover around the lens for aerial applications. The
DJI specied dust cover can be installed on the DJI MFT 15mm f/1.7 ASPH and the
Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH. Purchase an appropriate
dust cover for the Olympus M.Zuiko Digital ED 12mm f/2.0 if necessary.
It is important to tighten the Lens Lock after attaching the camera lens, as this can
reduce the vibrations of the lens when the aircraft is moving in ight. Always loosen
the Lens Lock before attaching and detaching the camera lens.
A lter can be installed in place of the Camera Balancing Ring. Remember to use a
lter that fullls the weight requirement.
The Lens Hood can only be installed on the DJI MFT 15mm f/1.7 ASPH or Panasonic
Lumix G Leica DG Summilux 15mm f/1.7 ASPH. DO NOT install the Lens Hood on
the Olympus M.Zuiko Digital ED 12mm f/2.0.
Lens Hood
Balancing Ring (or Filter)
6
7
Micro-SD
Click
5
4
ZENMUSE X5 User Manual
©2015 DJI. All Rights Reserved.
9
4. Attach the new gimbal mounting plate as shown below. With their flat sides facing
outwards, align the rear mounting plates with the rear bracket's screw holes. Tighten the
screws with a screwdriver.
5. Connect the 8-PIN cable and 10-PIN cable in order.
6. Place the front mounting bracket to the front bracket with its grooved side facing inwards.
Adjust the 8-PIN cable and 10-PIN cable to avoid protrusion, and then tighten the screws.
Mounting
Position
Front Mounting
Plate
Rear Mounting
Plate
Be sure to set the lens to AF mode.
Always hold down the Lens Release Button before rotating the Lens Lock to unlock it.
Mounting the Zenmuse X5 to the Inspire 1
(Watch Video: http://www.dji.com/product/inspire-1/video)
Ensure the aircraft is installed with Landing Gear Risers.
Replace the Inspire 1 Gimbal Mounting Plate
1. Remove the two black dampers at the front.
2. Disconnect the 10-PIN cable and 8-PIN cable in order. Be careful not to damage the
gimbal cables.
3. Remove the other two black dampers.
ZENMUSE X5 User Manual
10
©2015 DJI. All Rights Reserved.
Be careful not to damage the Gimbal Connector and its metal contacts when
attaching or storing the Zenmuse X5.
Mechanical Range
The 3-axis gimbal provides a incredibly stable and mobile platform for the camera system
to capture completely smooth images and video. The gimbal can tilt the camera up to 120
degrees and pan 320 degrees in either direction, providing 640 degrees of yaw rotation.
DO NOT attach or detach the Zenmuse X5 when the aircraft is powered on.
Take off from a at, open area and protect the gimbal after powering up.
Attach the Zenmuse X5
Ensure to power off the aircraft.
1. Rotate the Gimbal Lock to the unlocked position.
2. Align the key on the damping plate with the slot on the gimbal’s pan motor.
3. While aligning the white lines on the Gimbal Connector and Gimbal Lock, insert the Gimbal
Connector.
4. Rotate the Gimbal Lock to the locked position.
+320°
-320°
+30°
-90°
0°
Ground Level
24
Key
Slot
3
1
Tabla de contenidos
Otros manuales de Cámara digital de Zenmuse
