ZENEC ZE-NC2010 Manual de usuario
TOUCH ANOTHER WORLD
Naviceiver ZE-NC2010
Operation of Steering wheel control and the multi-
function display MFD+ for cars of the Golf 5 platform
1 of 4
Car type Model
Golf 5/Golf 5 Variant 2003 twice 2008
Jetta 2005 twice ...
Golf Plus 2005 twice ...
Passat /Passat Variant 2005 twice ...
Caddy 2004 twice ...
EOS 2006 twice ...
Scirocco 2008 twice ...
Tiguan 2007 twice ...
Touran 2003 twice ...
Seat Altea + XL *1 2004 twice ...
Seat Leon *1 2005 twice ...
SeatToledo *1 2004 twice ...
TOUCH ANOTHER WORLD
Naviceiver ZE-NC2010
Operation of Steering wheel control and the multi-
function display MFD+ for cars of the Golf 5 platform
2 of 4
Steering wheel Typ 1
Button Description of Operation
Volume +
Volume -
Mute
Incoming phone call Answer/ Hang up
Short press --> switch into the Bluetooth modus
Long press --> Activate the voice dailing
MFD+ - Source selection
Short press --> Previous track
Long press --> Fast rewind
Short press --> Next track
Long press --> Fast forward
Source modus selection (ZE-NC2010)
Steering wheel Typ 2
Button Description of Operation
Volume +
Volume -
Source modus selection (ZE-NC2010)
No funktion
*1; 2
No funktion
*1; 2
No funktion
*1; 2
Short press --> PreviousTrack
Long press --> Fast rewind
Short press --> Next track
Long press --> Fast forward
Steering wheel Typ 3
Button Description of Operation
Volume +
Volume -
Mute
No funktion
*1; 2
No funktion
*1; 2
Short press --> Previous track
Long press --> Fast rewind
Short press --> Next track
Long press --> Fast forward
Source modus selection (ZE-NC2010)
TOUCH ANOTHER WORLD
Naviceiver ZE-NC2010
Operation of Steering wheel control and the multi-
function display MFD+ for cars of the Golf 5 platform
3 of 4
Source :Tuner Source : Navigation Source : USB
Track status: X from XXTracks
Station name/ Frequency Navigation pictogram Track
Artist
Album
Radio status indication Remaining distance Track time/ TA Status
Source : IPod Source : SD-Card Source : CD / DVD
Track status: X from XXTracks Track status: X from XXTracks Track status: X from XXTracks
Track Track Track
Artist Artist Artist
Album Album Album
Track time/ TA Status Track time/ TA Status Track time/ TA Status
Source : Bluetooth
Phone number / Name
TA Status
Please note:
It is necessary to select the MFD+ source „AUDIO“ to display
information provided by the. In addition, there is no manual
selection between display the Navigation, playback and
Bluetooth information. Navigation pictograms and distances
are only available when a rout guidance is active. It stays active
until the rout guidance has been finished or aborted. Hands free
information are only available when a mobil phone is connected
and a call is active. This information will be displayed for ca. 20
seconds.
TOUCH ANOTHER WORLD
Naviceiver ZE-NC2010
Operation of Steering wheel control and the multi-
function display MFD+ for cars of the Golf 5 platform
4 of 4
Please note:
➔ Only the multi-function display plus (MFD+) is supported.
➔ The ZE-NC2010 and its CAN-Bus interface should only be used in automobiles mentioned
on the compatibility list. Caused by different configuration of vehicles and CAN-Bus
systems all information and pictures are without guarantee.
➔ The exfactory installed BT hands free system, the MEDIA IN, rear camera system and
also the CD-changer are not supported by the ZE-NC2010. Furthermore, the optical park
assist and active sound package (e.g. Dynaudio) are currently not supported.
➔ The automatic park assist must be reprogrammed by an authorized VW dealer to make
it run again after install the ZE-NC2010.
➔ To ensure the proper function of the ZE-NC2010, you should only use original accessories
which are included in the set content, such as GPS antenna, TMC receiver, external
microphone and Media Link Box.
➔ If you want to use optional accessories, such as rear view cameras or headrest monitors,
contact first your authorized ZENEC dealer.
➔ Since currently only the CAN-Bus system of the Golf V platform is supported, it is also
only their multifunction display supported. An indication for this is the color of the
MFD+ display, which should be red.
*1: Caused by car specific differences, this function cannot be guaranteed.
*2: For Seat vehicles with exfactory installed BT hands free, the phone control buttons are not supported.
Otros manuales para ZE-NC2010
5
Otros manuales de Sistema de navegación para automóviles de ZENEC
ZENEC
ZENEC Z-E3766 Manual de usuario
ZENEC
ZENEC Z-E3726 Hoja de instrucciones
ZENEC
ZENEC ZE-NE2010 Manual de usuario
ZENEC
ZENEC ZE-NC4110 - MOUNTING INSTRUCTIONS FOR SANTA... Manual de usuario
ZENEC
ZENEC ZE-NC2051D Manual de usuario
ZENEC
ZENEC Z-E4626 Manual de usuario
ZENEC
ZENEC Z-N326 Manual de usuario
ZENEC
ZENEC Prime Z-EMAP66 Series Manual de usuario
ZENEC
ZENEC ZE-NC5010 Manual de usuario
ZENEC
ZENEC Z-E2026 Manual de usuario
ZENEC
ZENEC ZE-NC5010 Manual de usuario
ZENEC
ZENEC Z-N326 Manual de usuario
ZENEC
ZENEC Z-E5514M Manual de usuario
ZENEC
ZENEC ZE-NC2041D Manual de usuario
ZENEC
ZENEC ZE-NA150 Manual de usuario
ZENEC
ZENEC ZE-NC5010 Manual de usuario
ZENEC
ZENEC Z-EMAP76 Series Manual de usuario
ZENEC
ZENEC Z-E3726 Manual de usuario
ZENEC
ZENEC Z-E3776 Manual de usuario
