Zanussi Electrolux ZDT 6053 Manual de usuario

User

manual

Dishwasher

ZDT 6053

156997 18/0en 27-10-2006 15:39 Pagina 1

Content

Safety information - - - - - - - - - - - - - - - - - -3

Control panel and functions - - - - - - - - - - -4

Audible si nals - - - - - - - - - - - - - - - - - - - -6

Pro ramme table - - - - - - - - - - - - - - - - - - -7

Before the first use - - - - - - - - - - - - - - - - -8

Settin the water softener - - - - - - - - - - - - -8

Fillin with dishwasher salt - - - - - - - - - - -11

Fillin with rinse aid - - - - - - - - - - - - - - - -12

Adjustin the dosa e of rinse aid - - - - - - -12

Loadin cutlery and dishes - - - - - - - - - - -13

Fillin with deter ent - - - - - - - - - - - - - - -15

Unloadin the dishwasher - - - - - - - - - - - -15

Cleanin and care - - - - - - - - - - - - - - - - - 16

Environmental concerns - - - - - - - - - - - - - 17

Somethin not workin - - - - - - - - - - - - - - 18

Technical data- - - - - - - - - - - - - - - - - - - - 20

Consumption values - - - - - - - - - - - - - - - 20

Hints for Test Institutes- - - - - - - - - - - - - - 21

Installation - - - - - - - - - - - - - - - - - - - - - - 22

Service and Spare Parts- - - - - - - - - - - - - 25

Guarantee conditions- - - - - - - - - - - - - - - 26

156997 18/0en 27-10-2006 15:39 Pagina 2

Safety information

Correct use

●This dishwasher is only intended for washin

household utensils suitable for machine

washin .

●Do not put any solvents in the dishwasher.

This could cause an explosion.

●Knives and other items with sharp points

must be loaded in the cutlery basket with

their points down or placed in a horizontal

position in the upper basket.

●Only use products (deter ent, salt and rinse

aid) suitable for dishwashers.

●Avoid openin the door whilst the appliance

is in operation, hot steam may escape.

●Do not take any dishes out of the dishwasher

before the end of the dishwashin cycle.

●After use, isolate the appliance from the

power supply and turn off the water supply.

●This product should be serviced only by an

authorised service en ineer, and only

enuine spare parts should be used.

General safety

●Dishwasher deter ents can cause chemical

burns to eyes, mouth and throat. Could

endan er life! Comply with the safety

instructions of the dishwasher deter ent

manufacturer.

●The water in your dishwasher is not for

drinkin . Deter ent residues may still be

present in your machine.

●Ensure that the door of the dishwasher is

always closed when it is not bein loaded or

unloaded. In this way you will avoid anybody

trippin over the open door and hurtin

themselves.

●Do not sit or stand on the open door.

Child safety

●This appliance is desi ned to be operated by

adults. Don’t allow children to use the

dishwasher unsupervised.

●Keep all packa in well away from children.

There is risk of suffocation.

●Keep all deter ents in a safe place out of

children’s reach.

●Keep children well away from the dishwasher

when the door is open.

Installation

●Check your dishwasher for any transport

dama e. Never connect a dama ed

machine. If your dishwasher is dama ed

contact your supplier.

●All packa in must be removed before use.

●Any electrical and plumbin work required to

install this appliance must be carried out by

a qualified and competent person.

●For safety reasons it is dan erous to alter

the specifications or attempt to modify this

product in any way.

In the interest of your safety and to ensure the correct use, before installin and first usin the

appliance, read this user manual carefully, includin its hints and warnin s. To avoid unnecessary

mistakes and accidents, it is important to ensure that all people usin the appliance are thorou hly

familiar with its operation and safety features. Save these instructions and make sure that they

remain with the appliance if it is moved or sold, so that everyone usin it throu h its life will be

properly informed on appliance use and safety.

156997 18/0en 27-10-2006 15:39 Pagina 3

Control panel and functions

Programme/Cancel button

On-Off button End of cycle li ht

In this fully inte rated appliance the controls are located on the top of the door. When selectin a

washin pro ramme, the door needs to be sli htly open.

●Never use the dishwasher if the electrical

supply cable and water hoses are dama ed;

or if the control panel, work top or plinth area

are dama ed such that the inside of the

appliance is freely accessible. Contact your

local Service Force centre, in order to avoid

hazard.

●All sides of the dishwasher must never be

drilled to prevent dama e to hydraulic and

electric components.

ARNING!

For electrical and water connection carefully

follow the instructions iven in specific

para raphs.

IMPORTANT!

Always remember that when performin

operations such as:

- selectin a washin pro ramme,

- deactivation/activation of the audible si nals,

- settin the water softener,

the appliance MUST be in settin mode:

●Press On-Off button, no pro ramme li hts

are illuminated and End of cycle li ht

flashes = appliance in setting mode.

●Press On-Off button, a pro ramme li ht is

illuminated and End of cycle li ht is

illuminated with fixed li ht = last performed

programme still set.

In this case the pro ramme has to be

cancelled (see instructions “Cancel a

washin pro ramme in pro ress”).

Salt refilling li ht

156997 18/0en 27-10-2006 15:39 Pagina 4

Programme/Cancel

button

●Starting the washing programme:

1. Press the On-Off button.

2. Press the Programme/Cancel once, the li ht of the last performed

washin pro ramme illuminates and the End of cycle li ht flashes.

3. Press the Programme/Cancel as many times as necessary to

illuminate the li ht correspondin to the desired pro ramme.

4. Close the dishwasher’s door, the pro ramme will start automatically.

IMPORTANT!

Once the pro ramme has started, if you want to chan e the selection made

you must cancel the washin pro ramme in pro ress.

●Cancel the washing programme in progress:

1. Open the door.

2. Press and hold the Programme/Cancel button until the li ht

of the runnin pro ramme turns off and the End of cycle li ht is

flashin .

3. Release the Programme/Cancel button.

4. Switch off the machine by pressin the On-Off button or select a new

washin pro ramme (check that there is deter ent in the deter ent

dispenser.

End of cycle li ht

Illuminates when the washin pro ramme has ended (visible with opened

door). Switch off the dishwasher by pressin the On-Off button.

It also has added functions of visual si nallin as:

- the settin of the water softener,

- deactivation/activation of the audible si nals.

- intervention of an alarm due to the malfunction of the machine.

Salt refilling li ht Illuminates when special salt needs to be filled.

It can remain illuminated several hours after the salt has been filled.

156997 18/0en 27-10-2006 15:39 Pagina 5

Audible signals

Audible si nals have been introduced to help

indicate which operations the dishwasher is

performin .

- end of the washin pro ramme,

- malfunction of the appliance.

Factory settin : audible si nals activated.

Deactivation/activation of the audible signals

2.Press and hold

Programme/Cancel

button until

pro ramme li ht 1

flashes and

pro ramme li ht 2

illuminates with fixed

li ht.

6.To memorise the

operation, switch off

the dishwasher by

pressin the On-Off

button.

3.Press

Programme/Cancel

button a ain:

pro ramme li ht 1

becomes fixed and

pro ramme li ht 2

starts flashin .

1.The dishwasher must

be switched off.

Switch on the

dishwasher by

pressin the On-Off

button.

4.After a few seconds

pro ramme li ht 1

turns off, pro ramme

li ht 2oes on

flashin and End of

cycle li ht illuminates

with fixed li ht.

The illumination of the

End of cycle li ht

means that the

audible si nals are

active.

5.To deactivate the

audible si nals, press

the Programme/-

Cancel button, the

End of cycle li ht

turns off indicatin

that the audible

si nals have been

deactivated.

7.To reactivate a ain the

audible si nals, follow

the instructions till point

4. Wait a few seconds

and then press the

Programme/Cancel

button, the End of

cycle li ht illuminates

indicatin that the

audible si nals have

been reactivated.

156997 18/0en 27-10-2006 15:39 Pagina 6

Programme table

Programme Use Cycle description

70° INTENSIVE Normal soil. Prewash - Main wash

Crockery, cutlery, pots and pans 2 intermediate rinses - Final rinse

Dry

50° BIO Normal soil. Prewash - Main wash

Crockery and cutlery 1 intermediate rinse - Final rinse

Dry

65° NORMAL Normal soil Prewash - Main wash

Crockery and cutlery 2 intermediate rinses - Final rinse

Dry

QUICK 30 MIN. Li ht soil. Main wash - Final rinse

Crockery and cutlery

RINSE & HOLD Any. Prewash

Partial load (to be completed later in the

day). This pro ramme does not require the

use of deter ent.

156997 18/0en 27-10-2006 15:39 Pagina 7

Before the first use

hen using separate special

(dishwasher) salt, rinse aid and

detergent:

- set the water softener

- add special salt

- fill up with rinse aid

hen using tablets that integrate

rinse aid and detergent:

there is no need to fill up with rinse aid

- set the water softener

- add special (dishwasher) salt

hen using tablets that integrate

rinse aid, detergent, salt function

and other additives:

there is no need to fill up with special salt or

rinse aid.

Check whether these deter ents are suitable

for your water hardness. Follow the

manufacturers instructions.

- Set the water hardness to level 1.

IMPORTANT!

If the dryin results are not satisfactory we

recommend that you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Set the rinse aid dosa e to position 2.

If you decide in future to use separated

deter ents, we advise that you:

- Fill up the salt and rinse aid container.

- Adjust the water hardness settin to the

hi hest level and perform 1 normal washin

pro ramme without loadin any dishes.

- Adjust the water hardness settin accordin

to the hardness of the water in your area.

- Adjust the rinse aid dosa e

Setting the water softener

The dishwasher is equipped with a water

softener desi ned to remove minerals and salts

from the water supply, which would have a

detrimental or adverse effect on the operation

of the appliance.

The softener should be adjusted accordin to

the hardness of the water in your area. Your

local Water Authority can advise you on the

hardness of the water in your area.

IMPORTANT!

The water softener must be set in both ways:

manually and electronically.

156997 18/0en 27-10-2006 15:39 Pagina 8

ater hardness Number of flashes of the Adjustment of the water

“end of programme” light hardness setting

in Clarke1) in °TH2) in mmol/l3) manually electronically

64 - 88 91 - 125 9,0 - 12,5 10 2 level 10

53 - 63 76 - 90 7,6 - 8,9 9 2 level 9

46 - 52 65 - 75 6,5 - 7,5 8 2 level 8

36 - 45 51 - 64 5,1 - 6,4 7 2 level 7

28 - 35 40 - 50 4,0 - 5,0 6 2 level 6

18 - 22 26 - 32 2,6 - 3,2 4 1 level 4

5 - 12 7 - 18 0,7 - 1,8 2 1 level 2

23 - 27 33 - 39 3,3 - 3,9 5 2 level 5

13 - 17 19 - 25 1,9 - 2,5 3 1 level 3

< 5 < 7 < 0,7 1 1 level 1

no salt necessary

1) Clarke de ree, measure of the water hardness.

2) (°TH) French de ree, measure of the water hardness.

3) (mmol/l) millimol per litre, international unit for water hardness

The water softener is factory set at position 2.

Setting the water softener manually (see table)

Set switch to position 1

or 2

factory

settin

156997 18/0en 27-10-2006 15:39 Pagina 9

Setting the water softener electronically (see table)

The water softener is factory set at position 5.

The dishwasher must

be switched off.

Switch on the

dishwasher by pressin

the On-Off button.

The End of cycle li ht

mi ht flash 5 times, for

example. The flashin is

repeated every 5

seconds.

To chan e the level,

press the

Programme/Cancel

button. Each time the

button is pressed the

level increases. (Level 1

follows level 10).

The End of cycle li ht

indicates the new

settin .

To memorise the

operation, switch off the

dishwasher by pressin

the On-Off button.

Press and hold

Programme/Cancel

button until pro ramme

li ht 1flashes and

pro ramme li ht 2

illuminates with fixed

li ht.

Wait until pro ramme

li ht 2turns off,

pro ramme li ht 1oes

on flashin and

simultaneously End of

cycle li ht starts

flashin . The number of

flashes of the End of

cycle li ht corresponds

to current level set

156997 18/0en 27-10-2006 15:39 Pagina 10

Otros manuales de Lavavajillas de Zanussi Electrolux

Zanussi Electrolux

Zanussi Electrolux DE 6865 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZSF 4126 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDF 411 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZSF 2420 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DE6344 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDF 131 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDF 121 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDF 221 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZSF 4111 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZSF 6160 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DE 6955 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDF 121 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDF 601 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZSF 4143 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DEF201 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DCE5655 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDS 231 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DE 4554 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZDF 511 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DA4143 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZSF 6128 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DCS 12 W Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DE 6754 Manual de usuario

Zanussi Electrolux

Zanussi Electrolux DA4442 Manual de usuario

Manuales populares de Lavavajillas de otras marcas

Electrolux

Electrolux ESI5211LOX Manual de usuario

KitchenAid

KitchenAid KUDB230B Manual de usuario

Brandt

Brandt BDJ424DB Manual de usuario

Asko

Asko DSD767UXXL.AU Manual de usuario

Beko

Beko DFN26210W Manual de usuario

NEFF

NEFF S153ITX00E Hoja de especificaciones

Midea

Midea SV 4.45 wi Manual de usuario

LG LDF7932 Manual de usuario

Gorenje

Gorenje GV63214 Manual de usuario

Hotpoint

Hotpoint HDA1100ZWH Manual de servicio

Blomberg

Blomberg LDFN2240W Manual de usuario

AEG

AEG FFB83836PM Manual de usuario

Cylinda

Cylinda DM3220RFD Manual de usuario

Atag

Atag DW8214MB Manual de usuario

GE GLD8000 Series Manual de usuario

Siemens

Siemens SN23HI02KE Hoja de especificaciones

Omega

Omega ODW717X Manual de usuario

BORETTI

BORETTI BVW-683 Manual de usuario