Z3 Technology Z3-HE2160-RPS Manual de usuario

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

User Instructions

H.265 Encoding System

Rapid Production Starter Kit

Model Name: Z3-HE2160-RPS

DOC-USR-0168-01

Manual Version 1.0

August 7, 2018

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

This document contains proprietary information of Z3 Technology, LLC ("Z3"). This document may not be used, reproduced, disclosed, or

disseminated to anyone without the prior written approval of an authorized representative of Z3. Z3 reserves the right to change this product at

any time and without notice. All product names, trademarks, trade names, service marks, or service names mentioned in this document are the

property of their respective owners.

Z3 Technology, LLC incorporates HDMI® technology. The terms of HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

Revision History

Version

Date

Change Note

Author

1.0.0

08/07/2018

Original Document

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

TABLE OF CONTENTS

1.0 GENERAL DESCRIPTION.................................................................................................. 5

2.0 QUICK START GUIDE ..................................................................................................... 8

2.1 If You Have Received a System from Z3 with the Software Preloaded........................................ 8

2.2 If You Already Have a System from Z3 and Need to Update the Firmware................................... 8

2.3 If You are Ready to Start Development............................................................................ 8

3.0 PACKAGE CONTENTS .................................................................................................... 9

4.0 FEATURES ................................................................................................................. 9

4.1 Supported Input Resolutions - Encoder ............................................................................ 9

5.0 UNTARRING AND BUILDING THE RPS CODE ..........................................................................10

5.1 Preparing the Linux Environment..................................................................................10

5.2 Making the Directories and Running the Make Script ...........................................................10

6.0 CODE OVERVIEW ........................................................................................................12

6.1 The z3apps/rdk Directory...........................................................................................12

6.2 Z3 Application Overview ............................................................................................12

7.0 RUNNING THE CODE YOU BUILT ON THE BOARD ...................................................................14

7.1 Via SD Card ...........................................................................................................14

7.2 Via User Interface....................................................................................................16

7.3 USB Update Process .................................................................................................17

8.0 APPENDIX A: Configuring the Wowza Server for RTMP ...........................................................17

APPENDIX B: Troubleshooting.......................................................... Error! Bookmark not defined.

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

LIST OF FIGURES

Figure 1 Z3-HE2160-MOD-xx Dimensions .............................................................................. 5

Figure 2 Z3-HE2160-RPS Dimensions and Interfaces ................................................................ 6

Figure 3 Z3-HE2160-RPS Block Diagram................................................................................ 7

Figure 4 Sample Content of Images Directory after Successful Build ...........................................11

Figure 5 Verified SD Cards for Software Update ....................................................................14

Figure 6 Format SD Card for Software Update.......................................................................15

Figure 40 Serial Output During Software Update ...................................................................15

Figure 41 Updating the Device Firmware from the Web Interface ..............................................16

Figure 42 Updater Screen ...............................................................................................17

Figure 43 Wowza Performance Settings ........................................... Error! Bookmark not defined.

Figure 44 Wowza Security Settings ................................................. Error! Bookmark not defined.

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

1.0 GENERAL DESCRIPTION

The Z3-HE2160-RPS is a compact OEM rapid production starter kit supporting HEVC/H.265 encode in

resolutions up to 1080p at 60 fps. The hardware consists of one Z3-HE1080-MOD-xx System on Module card

with one Z3-HE1080-APP-0x application board. The software consists of Linux kernel and application

packages to allow users to develop their own advanced multimedia applications.

The Z3-HE2160-MOD-xx is a compact OEM module which supports H.265 and H.264 High Profile encode at

up to 2160p30.

Figure 1 Z3-HE2160-MOD-xx Dimensions

58mm

58 mm

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

The Z3-HE2160-APP-01 is an application board design for rapid prototyping of the Z3-HE2160-MOD-xx and is

included in the Z3-HE2160-RPS. This application board uses the I/O expansion capability of the module to

implement additional functions not present in the module itself. This application board has one HDMI input,

one composite input and one 3G-SDI input as well as ports for Gigabit Ethernet, USB, Micro SD and RS-232

serial.

The Z3-HE2160-RPS software is based on the Linux OS. The kit comes with all of the low-level resources such

as the Linux kernel, u-boot, tool chain and starter file system pre-integrated and configured. The software

bundle also contains tools to allow the development of high-level applications using hardware-accelerated

video processing. Those customers that license the optional source code package can also receive source

code for Z3’s demonstration applications, providing an ideal starting point for custom applications.

Z3 Technology can provide services to customize the software applications to a customer’s specification. For

design services or additional support, please contact Z3 at www.Z3technology.com or

sales@Z3technology.com.

* Supports non-HDCP HDMI content only. For example, Blu-Ray players cannot be used as a video source.

Figure 2 Z3-HE2160-RPS Dimensions and Interfaces

76 mm

142 mm

USB 2.0

Loop 2 Out

+5V Power

HDMI Out

Power

Switch

HDMI In

Power

Light

Audio In

Ethernet

SD Card

Display

Port In

SDI In

Loop 1 Out

SDI In

RS-422/RS-485

Status LEDs

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

The following figure shows a block diagram of the Z3-HE2160-RPS system.

Figure 3 Z3-HE2160-RPS Block Diagram

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

2.0 QUICK START GUIDE

2.1 If You Have Received a System from Z3 with the Software Preloaded

To start working with the encoder, you can go straight to Section Error! Reference source not found.,

“Error! Reference source not found.,” on page Error! Bookmark not defined.. This section describes

how to quickly stream UDP, RTP, RTSP or RTMP as well as record to a USB storage device. Enabling Pro-

MPEG Forward Error Correction (FEC), Zixi Feeder™ or KLV data are also described.

2.2 If You Already Have a System from Z3 and Need to Update the Firmware

There are several options for updating the firmware on your RPS by following the instructions in Section

7.0: “RUNNING THE CODE YOU BUILT ON THE BOARD”, on page 14.

2.3 If You are Ready to Start Development

Details on how to untar and build the code can be found in Section 5.0: “ ,” on page Error! Bookmark

not defined.. A brief overview of the code itself can be found in Section 6.0: “CODE OVERVIEW,” on

page 12.

Details on how to set up your system to access the code you have built can be found in Section 7.0:

“RUNNING THE CODE YOU BUILT ON THE BOARD”, on page 14.

Please Note: Actual version numbers for your Z3 product may differ from those pictured in this document.

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

3.0 PACKAGE CONTENTS

1 x Z3-HE2160-RPS

1 x 12V1A Power Adapter

1x BNC to MMCX to BNC Cable

1 x Serial Cable

1 x Gender Changer

4.0 FEATURES

HEVC/H.265 encode and stream up to 1080p at 60 fps

H.264 encode and stream up to 1080p at 60 fps

Inputs: HDMI, 3G-SDI, Display Port

Additional Interfaces include 1Gb Ethernet, USB 2.0, SD Card and RS-232 Serial

Supports streaming in MPEG-2 TS over UDP, RTP, RTSP, RTMP and TSRTP, MPTS, TS File

Simultaneously stream in multiple resolutions, bitrates, codecs or output formats

Supports unicast and multicast streaming

Supports on-the-fly bitrate changes

HTTP-based configuration software for user-friendly configuration, control and update

RS-232 serial port for technical configuration and control

4.1 Supported Input Resolutions - Encoder

HDMI: 2160p30, 1080i60, 1080p60, 1080p59.94, 1080i50, 1080p50, 1080p30, 1080p29.97,

1080p25, p1080p24, 1080p23.98, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25,

720p24, 720p23.98, 576p50, 576i25, 480p60, 480i30, and 480i29.97

SDI: 2160p30, 1080i60, 1080p60, 1080p59.94, 1080i50, 1080p50, 1080p30, 1080p29.97,

1080p25, p1080p24, 1080p23.98, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25,

720p24, 720p23.98, 576i25, 480i30, and 480i29.97

Composite: 576i25, 480i29.97

Note: Interlaced inputs will be encoded as progressive by default; see section 7.2.1 for Encoding HEVC Interlaced

Streams

Z3C onfi dential

CONFIDENTIAL DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC ♦100 N. 8th St. STE 250 ♦Lincoln, NE 68508-1369 USA ♦+1.402.323.0702

5.0 UNTARRING AND BUILDING THE RPS CODE

5.1 Preparing the Linux Environment

Prior to building the Z3 code, certain modules are required. In Ubuntu 16.04 or later, the following

command can be used to get the required modules:

sudo apt-get install build-essential bison flex mtd-utils liblzo2-dev uuid-dev

zlib1g-dev libpcre3-dev autoconf autoconf-archive automake libtool libtool-

doc libc6-dev lynx xutils-dev libncurses5-dev yodl

In Fedora, the command would be:

sudo yum install bison flex mtd-utils mtd-utils-ubi lzo-devel libuuid-devel

pcre-devel automake autoconf libtool

If you are running a 64-bit OS, it may be necessary to install some 32-bit libraries for the cross-compiling

toolchain. You can determine whether your OS is 64-bit by using the “uname –p” command. A 64-bit OS

will return “x86_64,” while a 32-bit OS will return “i386”, “i586”, or “i686”.

For 64-bit Ubuntu, you can get the necessary libraries by typing:

# sudo apt-get install gcc-multilib

# sudo dpkg –-add-architecture i386

# sudo apt-get update

# sudo apt-get install libc6-dev-i386 libncurses5-dev:i386 libstdc++6:i386

zlib1g:i386 libmnl-dev libmnl0 pkg-config pkgconf cmake

For 64-bit Fedora, you can type:

# sudo yum install glibc.i686

For Ubuntu change shell from dash to bash:

# sudo dpkg-reconfigure dash

Then select “No” when it asks if “dash” should be the system shell (this will cause /bin/sh to be linked

to “bash” instead)

5.2 Making the Directories and Running the Make Script

The software provided will allow you to re-create the pre-installed software of the Z3-HE2160-RPS

starting from the included code.

On a PC running Linux, create a directory where the released materials are going to be located:

# mkdir /home/z3/he2160

Copy the released tar archive to that directory (note: the name may slightly vary).

# cp SW-CH1-00920-01_HE2160-RPS-20180803.tar.bz2 /home/z3/he2160

Untar the archive (name of tar file may slightly vary):

# tar -xvjf SW-CH1-00920-01_HE2160-RPS-20180803.tar.bz2

Tabla de contenidos

Otros manuales de Hardware de computadora de Z3 Technology

Z3 Technology

Z3 Technology FV2K-1XA Manual de usuario

Z3 Technology

Z3 Technology FSDI-1XA Manual de usuario

Z3 Technology

Z3 Technology DM816 Series Manual de usuario

Z3 Technology

Z3 Technology Z3-DM8168-PCI-RPS Manual de usuario

Z3 Technology

Z3 Technology Z3-DM368-VI-RPS Manual de usuario

Z3 Technology

Z3 Technology HETM-DCK-21 Manual de usuario

Z3 Technology

Z3 Technology Z3-Q603-RPS Manual de usuario

Z3 Technology

Z3 Technology FSDI2-DCK-1X Manual de usuario

Z3 Technology

Z3 Technology Z3-DM8107-RPS Manual de usuario

Z3 Technology

Z3 Technology DM8168-MOD-35 Manual de usuario

Z3 Technology

Z3 Technology Z3-DM8168-APP-41 Manual de usuario

Z3 Technology

Z3 Technology Z3-DM8107-SDI-RPS Manual de usuario

Z3 Technology

Z3 Technology Z3-DM368-ZDVR Manual de usuario

Z3 Technology

Z3 Technology FV4K-DCK-1 Series Manual de usuario

Z3 Technology

Z3 Technology Z3-DM8169-4CH-RPS Manual de usuario

Z3 Technology

Z3 Technology Z3-SBE264-10 Manual de usuario

Z3 Technology

Z3 Technology Z3-DM8168-DVR-RPS Manual de usuario

Z3 Technology

Z3 Technology Q603-RPS Instrucciones de instalación

Z3 Technology

Z3 Technology Z3-LEO-1X Manual de usuario

Z3 Technology

Z3 Technology FV2K-DCK-1x Manual de usuario

Z3 Technology

Z3 Technology Z3-DM368-VI-RPS Manual de usuario

Z3 Technology

Z3 Technology Z3-DM8107-SDI2-RPS Manual de usuario

Z3 Technology

Z3 Technology Z3-DM368-SDI-RPS Manual de usuario

Z3 Technology

Z3 Technology EIB-UAV-01 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario