Z GRILLS ZPG-10002B Manual de usuario

VN08012019

WOOD PELLET GRILLS

ZPG-10002B/ZPG-10002E

OWNER’S MANUAL

MON TO FRI, 8:00 A.M. - 5:00 P.M. PACIFIC STANDARD TIME

SERVICE CONTACT: 1-833-947-4557/1-833-ZGRILLS

EMAIL: support@zgrills.com

WEBSITE: www.zgrills.com

CONTENTS

WARNINGS

COMPONENT LIST

ASSEMBLY INSTRUCTIONS

INITIAL FIRING INSTRUCTIONS

SUBSEQUENT START-UP

OPERATING TIPS

MAINTENANCE & CLEANING

TROUBLESHOOTING

DIGTAL THERMOSTAT CONTROL WIRING DIAGRAM

Z GRILLS SUPPORT

3-Y LIMITED WARRANTY

SAVE THIS MANUAL FOR FUTURE REFERENCE

WARNINGS!

This grill is for outdoor use only. DO NOT use it in any enclosed area.

DO NOT store or use combustible materials or liquids near this appliance.

Keep children away while it is in use.

Maintain a safe distance between your grill and any combustible materials.

DO NOT move your grill while operating or while it is hot. Wait until the grill is

completely cold.

If a grease fire occurs, turn “off”and leave lid closed until the fire is extinguished. DO

NOT unplug the power cord. DO NOT throw water on it. DO NOT try to smother the

fire.

Clean and maintain your grill after each use.

We suggest that you use Z GRILLS BBQ WOOD PELLETS, which are specifically

made to work in our grills.

DO NOT use your grill on rainy days.

DO NOT touch any part of your grill while it is hot. Serious bodily injury could result.

We suggest the use of heat-resistant gloves when operating this grill.

We suggest that you should wrap the Grease Drain Pan with heavy-duty aluminum

foil before using because it is easy to clean.

For convenient and safe assembly, use at least two people to assemble the grill.

Make sure the power cord is disconnected before performing any service or

maintenance.

Always keep the Pellet Hopper dry, the wood pellets will expand greatly, break apart

and even jam the feed system if the pellets get wet or are exposed to high humidity.

DO NOT place anything heavy on top of hopper lid. It is not a shelf and is a tip hazard.

COMPONENT LIST

ITEM

QTY

DESCRIPTION

ITEM

QTY

DESCRIPTION

Lid

Power Cord

Lid Handle

Auger

RTD Temperature Probe

Thick Gasket

Heat Baffle

Hot Rod (Ignitor)

Top Warming Rack

Firepot Assembly

Middle Warming Rack

Hopper Burner Assembly

Porcelain Grills

Fan

Body Frame

Burner Box Assembly

Grease Drain Pan

Hopper Burner Gasket

Grease Bucket

Left Leg

Side Shelf

Wheels

Ash Tray

Bottom Plate

Ash Tray Handle

Foot Pad

Smoke Stack Gasket

Right Leg

Smoke Stack

Beam

Chimney Cap

Hopper Top Assembly

Hopper Lid

Hopper Handle

Hopper Guard

Hopper Bottom Assembly

Hopper Bottom Shell

Front Shelf Left Bracket

Digital Control

Front Shelf Right Bracket

Hopper Bottom Cover

Front Shelf

Power Cord Collector

Grease Drain Pan Support

Auger Drive Motor

Hopper Top Shell

Auger Tube Bushing

ASSEMBLY INSTRUCTIONS

PARTS

DIAGRAM

Hopper Burner Assembly:

Body Frame Assembly:

1.MOUNTING THE BODY FRAME TO THE CHAMBER

1.Locate the Beam (39) between Left Leg (34) and Right Leg (45) with Bolt (A).

2.Attaching Bottom Plate (36) on the 4 legs using Bolts (A).

3.Insert Axle (C) through the hole in Wheel (35) and Right Leg (38). Place Gasket (H) onto

Axle (C) and secure with Cap Nut (D). Tighten with Wrench (M).

4.Insert the Foot Pad (37) into the Left Foot (34).

5.Remove the two Protection Bar under the Grill Chamber (1) with screwdriver.

6.Remove Bolts (A) from the Grill Chamber (1). Lift up the Grill Chamber (1) on the Body

Frame. Make sure that the Grill Chamber (1) is between the left and right plate of the Frame.

Align the Chamber holes with the plate holes and secure with Bolt (A).

2.ASSEMBLING OF HOPPER

1.Insert Hopper Top Assembly (40) into Hopper Bottom Assembly (42), align the holes.

Make sure hopper opens to the front (control side). Insert the Bolts (E) through the holes in

the Hopper and Kep Nuts (F), then open the Hopper Lid and tighten it from inside. The four

sides are installed in the same way.

2.Insert Bolt (A) through the Hopper Handle (41) and into the Hopper.

3.MOUNTING THE HOPPER TO THE CHAMBER

1.Open the Lid, insert the Hopper into the Chamber, then using the Bolts (G) and Gaskets (H)

install it in sequence from inside. Note: the upper pair of Bolts and Gaskets need to be

threaded through the Grease Drain Pan Support (46).

2. Locate the RTD plug-in connector coming from the mounted RTD inside the grill frame.

Connect this with the mating connector located on the outside of the hopper burner

assembly. NOTE: excess wire on the RTD plug should remain outside the Chamber.

4.ATTACHING THE SMOKE STACK AND CHIMNEY CAP

1.Align the holes in the Smoke Stack (15) with holes in the Smoke Stack Gasket (14), which

fits between the right end of the Grill and the Smoke Stack Gasket (14). Insert the Hexagon

Bolts (B) through the holes in the Smoke Stack (15) and the Smoke Stack Gasket (14).

2.Place a Gasket (H) on each Bolt (B) and secure with Hexagon Nut (I).

3.Install the Chimney Cap (16) to Smoke Stack (15).Note that the Chimney Cap (16) is

vertical and then tighten.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Parrilla de Z GRILLS

Z GRILLS

Z GRILLS ZPG-1050 2B Manual de usuario

Z GRILLS

Z GRILLS ZPG-450A Manual de usuario

Z GRILLS

Z GRILLS ZPG-700D Manual de usuario

Z GRILLS

Z GRILLS ZPG-700D Manual de usuario

Z GRILLS

Z GRILLS ZPG-550C Manual de usuario

Z GRILLS

Z GRILLS ZPG-6002B3 Manual de usuario

Z GRILLS

Z GRILLS ZPG-700D3 Manual de usuario

Z GRILLS

Z GRILLS ZPG-550A Manual de usuario

Z GRILLS

Z GRILLS ZPG-450A Manual de usuario

Z GRILLS

Z GRILLS ZPG-450B Manual de usuario

Z GRILLS

Z GRILLS ZPG-1000C Manual de usuario

Z GRILLS

Z GRILLS Feed Life ZPG-700E Series Manual de usuario

Z GRILLS

Z GRILLS ZPG-550B2 Manual de usuario

Z GRILLS

Z GRILLS Feed Life 7002B Manual de usuario

Z GRILLS

Z GRILLS ZPG-450A Manual de usuario

Z GRILLS

Z GRILLS MULTITASKER 11002B Manual de usuario

Z GRILLS

Z GRILLS ZPG-7002B Manual de usuario

Z GRILLS

Z GRILLS Feed Life 7002B Manual de usuario

Z GRILLS

Z GRILLS Feed Life ZPG-700E-XL Manual de usuario

Z GRILLS

Z GRILLS ZPG-550B Manual de usuario

Z GRILLS

Z GRILLS 700E-XL Manual de usuario

Z GRILLS

Z GRILLS Feed Life ZPG-700E Series Manual de usuario

Z GRILLS

Z GRILLS 450A Manual de usuario

Z GRILLS

Z GRILLS ZPG-550B Manual de usuario

Manuales populares de Parrilla de otras marcas

Orbegozo

Orbegozo GR 2300 Manual de usuario

bora

bora PT11 Manual de usuario

Klarstein

Klarstein 10031664 Manual de usuario

Garland

Garland MWE3W Manual de usuario

Char-Broil

Char-Broil 463722714 Manual de usuario

Nexgrill

Nexgrill 720-0830HK Manual de usuario

Kenmore

Kenmore 415.16123800 Manual de usuario

Camp Chef

Camp Chef PG24CLAU Manual de usuario

Tucker Barbecues

Tucker Barbecues GTR Series Instrucciones de montaje

Monogram

Monogram ZGG540NCP1SS Manual de usuario

Equipex

Equipex Sodir Savoy Manual de usuario

Gaggenau

Gaggenau VR 414 610 Manual de usuario

Miele

Miele KM 408-1 Manual de usuario

George Foreman

George Foreman GGR50B Manual de usuario

AOG

AOG T series Manual de usuario

Gorenje

Gorenje TG2000CB Manual de instrucciones

Weber

Weber Genesis Silver-B Permamount NG 051701 Manual de usuario

Glen

Glen SA 3037 Manual de usuario