YOKOGAWA XL100 Manual de usuario
User's
Manual
XL100
Datum-Y
クイックマニュアル
QuickSetupManual
IMXL120P
IMXL120P
1stEdition:Apr.2007(YMI)
XL111,XL112,XL114
ポータブルデータロガ−(Datum-Y)
XL121,XL122,XL124
ポータブルデータステーション(Datum-Y)
XL111,XL112,XL114
PortableDataLogger(Datum-Y)
XL121,XL122,XL124
PortableDataStation(Datum-Y)
1
IM XL120P
Introduction
Thank you for purchasing our XL100 Portable Data Station/Portable Data
Logger.
This Quick Setup Manual briefly describes the key operations as well as setting
examples of the XL100 upon actual measurement, so that you can operate the
XL100 for the first time.
In addition to this manual, the User’s Manual and Communication Function
Manual contained in the CD-ROM are available separately. The User’s Manual
provides detailed information regarding all of the functions and operations of the
XL100 excluding the communication functions. The Communication Function
Manual provides information necessary for using communication functions and
creating communication programs. Use them together with this Quick Setup
Manual. The Communication Function Manual is available only for the Portable
Data Station.
After reading this manual, keep it in an easily accessible place for later
reference. This manual will come in handy when you are unsure of how to
operate the product.
Notes
• The contents of this manual are subject to change without prior notice.
•Figures and illustrations representing display views in this manual may differ
from actual views.
•Every effort has been made to ensure accuracy in the preparation of this
manual. However, should any doubts arise or errors come to your attention,
please contact the vendor from which you purchased the product.
•The contents of this manual may not be transcribed or reproduced, in part or
in their entirety, without prior permission.
Trademarks
The company and product names referred to in this document are either
trademarks or registered trademarks of their respective holders.
Revisions
First Edition: April, 2007
1st Edition: April 2007 (YMI)
All Rights Reserved, Copyright © 2005, Yokogawa Meters & Instruments Corporation
2IM XL120P
Safety Precautions
When operating the instrument, be sure to observe the cautionary notes given
in “Safety Precautions” on pages 4 and 5 and section 3.1, “Handling
Precautions” in the User’s Manual. If you use the instrument in any way other
than as instructed, the instrument’s protective measures may be impaired.
The following safety symbols are used on the instrument and in this manual.
WARNING
Indicates a hazard that may result in the loss of life or serious injury of the
user unless the described instruction is abided by.
CAUTION
Indicates a hazard that may result in an injury to the user and/or physical
damage to the product or other equipment unless the described instruction is
abided by.
Note
Indicates information that is essential for handling the instrument or should
be noted in order to familiarize yourself with the instrument’s operating
procedures and/or functions.
TIP
Indicates information that complements the present topic.
3
IM XL120P
Contents
Introduction ............................................................................. 1
Safety Precautions.................................................................. 2
1. Checking the Contents of the Package ........................ 4
2. Flow of Operation ........................................................... 5
3. Names and Functions of Parts ...................................... 6
4. How to View the Display ................................................. 9
5. Introduction of the Main Functions ............................. 15
Input Type and Calculation .................................................................. 15
Alarm Function ..................................................................................... 16
Saving Data ........................................................................................... 17
Triggers ................................................................................................. 18
File Operations ..................................................................................... 18
Communication Function .................................................................... 19
6. Operation Mode and Basic Key Operations ............... 21
Operation Modes and Switching the Operation Mode ...................... 21
Switching the Display in Free Running Mode or Logging Mode ...... 22
Switching the menu in Setting Mode .................................................. 22
Key Operations for Entering Characters ............................................ 23
Key Operations for Entering Values .................................................... 23
7. Signal Wiring ................................................................. 24
8. Connecting to the Power Supply and Turning the
Power Switch ON/OFF .................................................. 26
Connecting the Power Supply ............................................................. 26
Turning the Power Switch ON/OFF ..................................................... 27
9. Setting the Input Channel ............................................ 29
10. Setting the Data Save Operation ................................. 33
11. Confirming the Settings and Performing the Measure-
ment ............................................................................... 38
12. Inserting an External Storage Medium and Saving Data . 39
Inserting an External Storage Medium ............................................... 39
Starting the Data Save Operation ....................................................... 40
Stopping the Data Save Operation ..................................................... 40
13. Analyzing the Saved Data ............................................ 41
Loading the Saved Data File ................................................................ 41
Loading the Measured Data ................................................................. 43
Displaying Statistical Calculation Values ........................................... 43
14. Troubleshooting ............................................................ 44
Index....................................................................................... 45
4IM XL120P
1. Checking the Contents of the Package
Unpack the box and check the contents before operating the instrument. Should
the product you have received be the wrong model, lack any items, or show any
problems in its appearance, contact the vendor from whom you purchased the
product.
Instrument Main Unit
Check the model and suffix code printed on the nameplate on the rear panel to
ensure that the XL100 is exactly as specified in your purchase order.
XL100
No.
Model
When inquiring about the product to
the vender, please also give the vendor
this number.
Accessories
Make sure that the package contains all the accessories listed below and that
they are all free from any damage.
These are attached to the XL100.
Terminal block unit Rubber boot
AC adapter Quick setup manual
(this manual)
CD-ROM
Contains Standard Software and
PDF manuals (User's Manual,
Quick Setup Manual, and
Communication Function Manual).
1.
b
+
-
ch1
b
+
-
ch2
b
+
-
ch3
b
+
-
ch4
b
+
-
ch5
b
+
-
ch6
b
+
-
ch7
+
-
ch8
(Ex.: 95052)
Screwdriver for
terminals
Side cover
(Supplied with the
XL121, XL122, and
XL124)
TIP
For details on peripherals and spare parts, see page 3 in the User’s Manual.
5
IM XL120P
2. Flow of Operation
Connect the wires
Connect the power supply
and turn the power ON
Configure • Set the input
• Save the data
Set other items (as necessary)
• Alarm
• Display
• Calculation
• Communications
• Hardware
• System
Confirm the settings
and measure
Save the data
Free Running Mode
Logging Mode
Set the language
Initial startup only
Analyze the data
• Review Mode
• Logging & Review Mode
Process the file (as necessary)
• Rename the file
• Delete the files
• Copy the data
Reference chapter/
section in the
User’s Manual
3.3-3.5
Page 24
Page 26
Page 28
Page 29
Page 33
Page 38
Page 39
Page 41
Reference page
in this manual
3.6, 4.1
Chapter 5
9.1
Chapter 6
Chapter 7
Chapter 8
Chapter 10
Chapter 4, 11, etc.
11.6, 11.7
9.1
9.2
9.7
9.8
9.9
6IM XL120P
3. Names and Functions of Parts
Front Panel
HOME REVIEW FILE
SETTING
HOLD
TIME / DIV
SAVE
RANGE DISPLAY
GROUP
MARK
SET
ESC
SELECT
START
/ STOP
Display
Displays measured data, operation
status, setup menu, settings, etc.
Terminal block unit
Terminal block unit where
probes are connected.
Keys
Operation status LED
POWER : Illuminates when the power is ON
CHARGE : Illuminates when the battery is being charged
START : Illuminates while logging
Status display
section
Data display,
setting menu,
and setting
display section
For the wiring procedure,
see page 23.
For the viewing the displays,
see page 9.
Keys
HOME REVIEW FILE
SETTING
HOLD
TIME / DIV
SAVE
RANGE DISPLAY
GROUP
MARK
SET
ESC
SELECT
START
/ STOP
1234
5
67
8
9
11
10
12 13
14 15 16
7
IM XL120P
1. HOME Key
Press this key to enable Free Running Mode for measuring instantaneous values (see
page 21).
2. REVIEW Key
Press this key to enable Logging & Review Mode in which past measured data can be
viewed while logging (see page 21) or enable Review Mode in which saved data can
be analyzed (see page 21).
3. FILE Key
Press this key to enable File Operation Mode in which file names can be changed,
measured data can be copied, setting data can be saved or loaded, and so on (see
page 21).
4. SETTING Key
Press this key to set measurement conditions, conditions for saving measured data,
alarm conditions, etc.
5. HOLD Key
Press this key to hold the display so that the measured values are not updated or to
release the display. In addition, hold this key down to enable or disable key lock.
6. TIME/DIV Key
Press this key to switch the time axis (the time per grid (division)).
7. ESC Key
Press this key to cancel a key operation.
8. SET Key
Press this key to set settings entered through the keys.
9. START/STOP Key
Press this key to start/stop logging.
10. RANGE Key
Press this key to change the input range or span (scale).
11. DISPLAY Key
Press this key to switch the display in Free Running Mode or Logging Mode (see page
22). Press this key also to switch between marker display and statistical calculation
display in Review Mode.
12. SAVE Key
Press this key to manually save or print the measured data or screen data.
13. GROUP Key
Press this key to switch the displayed group of measurement, calculation, and
communication input channels.
14. Fast Forward Key
Press this key to move the marker to the left or right by 1 division on the review display
(see page 43).
15. MARK Key
Press this key to select a marker to be activated on the review display (see page 43).
16. Arrow/SELECT Key
Press the arrow keys to select items on the display. Press this key also to move the
marker to the left or right on the review display (see page 43).
Press the SELECT key to confirm a selection.
3. Names and Functions of Parts
8IM XL120P
Side Panel
For details on connecting
the power supply and
turning the power ON/OFF,
see pages 26 and 27.
For details on how to insert
the CF card or SD card, see
page 39.
CF card slot
SD card slot*
Trigger input/output terminal
RS-485 connector*
Ethernet port*
Power switch
AC adapter jack
RS-232 connector*
For a description, see section 3.9.
For a description,
see section 3.8.
For a description,
see section 3.8.
For a description,
see section 4.7.
For a description,
see section 4.7.
For a description, see section 3.5.
For a description, see section 3.4.
For a description, see section 3.8.
For a description, see section 3.8.
For a description,
see section 4.1.
For a description,
see section 3.6.
Digital I/O connector
USB port for USB memory
USB port for
connecting a PC*
* Supported only on the XL121, XL122, and XL124
USB
SG
USB
RS485 RS232LAN
CF
SD
TRIGGER
ALARM
LOGIC/PULSE
GND
IN OUT
DC INPUT
POWER
12V 20W MAX
The reference sections are those
of the User’s Manual.
Rear Panel
Screwdriver for terminals (accessory)
Press the screwdriver towards the spring
(right in this figure) to detach it.
Battery cover
Holds the lithium ion
battery (94009) sold
separately .
Name plate
3. Names and Functions of Parts
9
IM XL120P
4. How to View the Display
Status Display Section
1
2
345
6
8
7
1. Operation Mode
Displays the mode: Free Running, Logging, Logging & Review, Setup, or
File Operation.
2. User name
Displays the login user name when the key login function (see section 11.7
in the User’s Manual) is turned ON.
3. Group Name (For the procedure to set groups, see section 7.2 in the
User’s Manual)
Displays the group name of the displayed measurement channel.
4. Alarm Status (For a description of the alarm function, see page 16)
The status is displayed using different icon colors as follows:
Gray: No alarm setting
Yellow-green: Alarm setting enabled
Red: Alarm activated
5. Alarm Output Status
The status is displayed using different icon colors for each alarm output
channel (1 to 4) as follows:
Gray: No alarm setting
Yellow-green: Alarm setting enabled
Red: Alarm outputting
6. Date/Time (For the procedure to set the date/time, see section 4.3 in the
User’s Manual)
Displays the year, month, day, hour, minute, and second.
7. Sampling Interval
Displays the sampling interval (measurement/save interval of measured
data) when in Free Running, Logging, or Logging & Review Mode.
8. Various Icons
The following icons are used to display the operation status, interface usage
status, etc.
An icon shown when the data save destination is set to internal memory. The
icon blinks when there is access to the internal memory. The icon is gray
when the data save destination is not set to internal memory.
Otros manuales para XL100
2
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Registrador de datos de YOKOGAWA
YOKOGAWA
YOKOGAWA MX100 Manual de usuario
YOKOGAWA
YOKOGAWA SMARTDAC+ GX10 Manual de usuario
YOKOGAWA
YOKOGAWA SMARTDAC+ GM10 Manual de uso y cuidado
YOKOGAWA
YOKOGAWA SL1000 Manual de usuario
YOKOGAWA
YOKOGAWA SMARTDAC+ GX10 Manual de usuario
YOKOGAWA
YOKOGAWA Datum Y XL100 Manual de usuario
YOKOGAWA
YOKOGAWA XL100 Manual de usuario
YOKOGAWA
YOKOGAWA SMARTDAC+ GM Manual
YOKOGAWA
YOKOGAWA uR1800 Manual de usuario
YOKOGAWA
YOKOGAWA MW100 Manual de usuario
