Yard force YF2200BL Manual de usuario

Model YF2200BL
OPERATOR'S MANUAL
ELECTRIC HIGH-PRESSURE WASHER
Before operating this product, please read this manual
thoroughly and retain it for future reference.
SUMEC NORTH AMERICA
3939 Royal Drive NW
Unit #234
Kennesaw, GA 30144
Y 2200BL indd 1 15-4-29 ��6 32

2
DO NOT RETURN PRODUCT TO PLACE OF PURCHASE.
IF YOU HAVE ANY QUESTIONS, CALL OUR TOLL-FREE HOTLINE.
(866) 902-9690
ForceToolsUSA.com
Y 2200BL indd 2 15-4-29 ��6 32

I
TABLE OF CONTENTS
YF2200BL Operator's Manual
Description of Product Parts………………………………………………………………………………......02
Technical Specifications…………………………………………………………………………………….....04
Intended Use……………………………………..…………………………………………………………......04
Important Safety Instructions……………………………………………………………………………….....05
Installation Instructions………………………………………………………………………………………...10
Operating Instructions……………………………………………………………………………………….....15
Cleaning and Maintenance………………………………………………………………………………….....19
Moving and Storage Instructions………………………………………………………………….................20
Disposal....…………………………………………………………………………………………………........21
Troubleshooting……....………………………………………………………………………………………...21
Warranty………………………………………………………………………………………………...............24
Y 2200BL indd 1 15-4-29 ��6 32

2
DESCRIPTION OF PRODUCT PARTS
Parts list
As shown in Fig. 1-3
1. Gun / power cord / hose holder
2. Handle with soft grip
3. Spray tips storage slots
4. Pressure adjusting knob
5. Support
6. High-pressure water outlet
7. Water inlet
8. Locking/releasing pin (not visible in this illustration)
9. On / Off Switch
10. Wheel
11. Plug
12. Power cord with GFCI
13. Attachments storage
14. Detergent intake hose
15. Nozzle cleaning needle
16. High-pressure hose
17. Quick-connect wand
18. Spray gun high-pressure water inlet
19. Trigger switch
20. Safety lock
21. Trigger handle
22. 0° nozzle
23. 15° nozzle
24. 40° nozzle
25. Soap nozzle
26. Turbo nozzle
27. Nozzle cleaning needle
Fig.1
Fig.2
Fig.3
Y 2200BL indd 2 15-4-29 ��6 32

3
CHECK THE DELIVERY PARTS
As shown in Fig. 4
Carefully remove the pressure washer and parts from its packaging. Identify all the parts packaged in
the carton against the parts list. Please contact our customer service center (Monday-Friday 8:30AM-
5:00PM ET) at (866) 902 9690 if anything is missing.
A High-pressure washer x1
B High-pressure hose x1
C Quick-connect wand x1
D Trigger handle x1
E1 0° nozzle x1
E2 15° nozzle x1
E3 40° nozzle x1
E4 Soap nozzle x1
E5 Nozzle cleaning needle x1
F Nozzle pin x1
G Operating manual x1
WARNING: If any parts are damaged or missing, do not operate this tool until the missing parts
are replaced. Failure to heed this warning could result in serious personal injury.
NOTE! Always recycle the packaging in accordance with local recycling schemes.
Fig.4
Y 2200BL indd 3 15-4-29 ��6 32

4
TECHNICAL SPECIFICATIONS
INTENDED USE
Model YF2200BL
Input voltage rating 120 V, 60 Hz
Input power 13 A
Working pressure 2200psi
Max. pressure 2500psi
Flow rate 1.25GPM (280L/H)
Inlet pressure 44psi
Supply water temperature (max.) Cold tap water 104oF (40oC)
Electrical cord 35ft. (10.7m)
High-pressure hose 25ft. (7.6m)
Detergent injection rate 3%~12%
The pressure washer is intended for cleaning the walls of buildings, facades, terraces,
footpaths, garden equipment, machinery, vehicles, tools, etc. with a pressure water
nozzle. If required, you can also use the pressure washer with added household
cleaning agents.
The pressure washer is to be used only for its prescribed purpose, any other use is
deemed to be a case of misuse. The user/operator and not the manuafacturer will be
liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade
or industrial applications. Our warranty will be voided if the pressure washer is used
in commercial, trade or industrial businesses or for equivalent purposes.
Y 2200BL indd 4 15-4-29 ��6 32

5
IMPORTANT SAFETY INSTRUCTIONS
Please read all of the safety precautions before operating this pressure washer
every time.
Please pay particular attention to all sections with following symbols.
The following signal words and meanings are intended to explain the levels of risk
associated with this pressure washer.
DANGER!
Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING!
Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION!
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION!
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.
WARNING! - When using this pressure washer, basic precautions should always
be followed, including the following:
1. Read all the instructions before using the pressure washer.
2. To reduce the risk of injury, close supervision is necessary when a product is used
near children.
3. Know how to stop the pressure washer and release pressure quickly. Be
thoroughly familiar with the controls.
Y 2200BL indd 5 15-4-29 ��6 32

6
4. Stay alert-watch what you are doing.
5. Do not operate the pressure washer when fatigued or under the influence of
alcohol or drugs.
6. Keep operating area clear of all persons.
7. Do not overreach or stand on unstable support. Keep good footing and balance
at all times.
8. Follow the maintenance instructions specified in the manual.
9. This pressure washer is provided with a Ground Fault Circuit Interrupter built
into the power cord plug. If replacement of the plug or cord is needed, use only
identical replacement parts.
10.This pressure washer or its power cord contains lead, a chemical known to cause
cancer, birth defects or other reproductive harm. Wash hands after handling.
WARNING - Risk of injection or injury – Do Not Direct Discharge Stream At
persons.
11.Never operate the pressure washer without all components properly connected to
the pressure washer (handle, gun/wand assembly, nozzle, etc.).
12.Never operate pressure washer with broken or missing parts. Check equipment
regularly and repair or replace worn or damaged parts immediately.
13.Never put hand or fingers over the nozzle or spray tip while operating the pressure
washer.
14.Never spray flammable liquids or use pressure washer in areas containing
combustible dust, liquids or vapors. An electric spark could cause an explosion.
15.Never leave the wand unattended while the pressure washer is running or
switched on.
16.Never disconnect the high-pressure discharge hose from the pressure washer
while the system is pressurized. To depressurize washer, turn power and water
supply off, then depress gun trigger 2-3 times.
17.Never cover the pressure washer during operation to allow free air cooling.
18.Always wear safety glasses or goggles when operating or performing
maintenance.
19.Always move switch on washer to “OFF” position before connecting or
disconnecting cord to electrical outlets.
20.Always turn water supply "ON" before turning pressure washer "ON" unless
draining for storage. Running pump dry causes serious damage.
21.Always hold gun and wand firmly when starting and operating the pressure
Y 2200BL indd 6 15-4-29 ��6 32

7
washer.
22.Always follow detergent manufacturer’s label recommendations for proper use
of detergents. Always protect eyes, skin and respiratory system from detergent if
used.
23.Always lock the trigger of spray gun in the safety position when not in use.
24.Do not use pressure that exceeds the operating pressure of any of the parts (hoses,
fittings, etc.) in the pressurized system. Never use with any other manufacturer’s
accessories or components.
25.Do not spray electrical apparatus and wiring or the pressure washer itself.
26.Do not operate the pressure washer with the inlet water filter removed. Keep filter
clear of debris and sediment.
27.Discharge residual pressure by depressing the trigger until no more water comes
out of the nozzle.
28.Keep clear of nozzle. Never direct high-pressure spray at any person, animal or
self.
29.To minimize the amount of water getting into the pressure washer, the pressure
washer should be placed as far as possible from the cleaning site during
operation.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a ground fault circuit interrupter (GFCI) built
into the plug of the power cord. This device provides additional protection from the
risk of electric shock. Should replacement of the plug or cord become necessary,
use only identical replacement parts that including of GFCI protection.
TEST BEFORE EACH USE. Press the “TEST” button. Red indicator should disappear.
Press “RESET” button again for use. DO NOT USE if above test fails.
EXTENSION CORDS
If possible, do not use extension cords with this pressure washer; however, if you
must use one, observe all of the warning and instructions listed below:
WARNING
Extension cords are not recommended unless these are plugged into a ground fault
circuit interrupter (GFCI) found in circuit boxes or protected receptacles.
1. Use only extension cords that are intended for outdoor use. These extension
Y 2200BL indd 7 15-4-29 ��6 32

8
cords are identified by a marking “Acceptable for use with outdoor appliances; store
indoors while not in use.”
2. Use only extension cords having an electrical rating not less than the rating of the
pressure washer.
3. Do not use damaged extension cords. Examine extension cord before using and
replace if damaged.
4. Do not abuse extension cord and do not yank on any cord to disconnect. Keep
cord away from heat and sharp edges.
5. Always disconnect the extension cord from the power source before
disconnecting the pressure washer from the extension cord.
WARNING – To reduce the risk of electrocution, keep all connections dry and
off the ground. Do not touch plug with wet hands.
WARNING
RISK OF INJURY
INJECTION HAZARD
1. Equipment can cause serious injury if the spray penetrates the skin. Do not point
the gun at anyone or any part of the body. In case of penetration, seek medical
aid immediately.
2. This system is capable of producing 1885psi. To avoid rupture and injury, do not
operate this pump with components rated less than 1885psi working pressure
(including but not limited to spray guns, hose, and hose connections).
3. Before servicing, cleaning, or removal of any part, switch off power and relieve
pressure.
WARNING
RISK OF INJURY
DO NOT DIRECT DISCHARGE STREAM AT SELF OR OTHER
PERSONS.
1. High-Pressure jet can be dangerous if misused.
2. The jet must not be directed at persons, animals, electrical devices, or the unit
itself.
Y 2200BL indd 8 15-4-29 ��6 32
Tabla de contenidos
Otros manuales de Hidrolavadora de Yard force

Yard force
Yard force AQUAJET 2 Manual de usuario

Yard force
Yard force Q1W-SP04-2200 Manual de usuario

Yard force
Yard force AQUAJET Manual de usuario

Yard force
Yard force EW N15X Manual de usuario

Yard force
Yard force EW U13 Manual de usuario

Yard force
Yard force EW U15 Manual de usuario

Yard force
Yard force EW U13A Manual de usuario

Yard force
Yard force YF4050PB Manual de usuario

Yard force
Yard force EW U19 Manual de usuario

Yard force
Yard force YF2200LC Manual de usuario






















