Yamaha YHT-24 Instrucciones de montaje

1ST DRAFT

QUICK-CONNECT GUIDE

YHT-24

YHT-24 QUICK-CONNECT GUIDE

INTRODUCTION

Yamaha developed the YHT-24 A/V Home Theater

package to turn your home into a theater. In addition

to enhancing the sound of a video source, like your TV

or VCR, the YHT-24 also superbly reproduces audio

sources, such as a CD player or a cassette deck.

This Quick-Connect Guide will help you get started.

Study the speaker system plan (below), and then use

the interconnect diagrams (on the following pages) to

connect the receiver and speakers to your system.

For the video portion, you will need a television or

monitor. Please refer to the Yamaha HTR-5440 Owner’s

Manual, as well as the owner’s manuals that came with

your other components, for complete instructions and

cautions. Be sure to turn off all power while making

the connections.

Please keep this guide handy for future reference.

NOTE: Label the end of each speaker wire (i.e., left rear, right

front, etc.) before connecting them to the A/V receiver. For wire

runs over 30 feet, use larger 18- or 16-gauge speaker wire.

• Toggle bolts, molly anchor screws, sheet metal screws,

and/or speaker brackets (for securing the NS-AP280

speakers to walls)

NOTE: If you are unsure of how to securely and safely fasten

speakers to a wall, please contact a reliable source about the best

type of hardware for your particular wall's construction.

Secure installation is the purchaser's responsibility.

TOOLS AND PARTS

The YHT-24 Home Theater package consists of

(1) HTR-5440 A/V receiver with a universal remote

control, (1) DV-S5350 DVD player, (1) NS-AP280

package containing (5) 2-way NS-AP280 speakers,

100' of speaker wire, (1) SW-201 powered subwoofer,

and related owner’s manuals. You will also need:

• Wire strippers (optional)

SPEAKER SYSTEM PLAN

NS-AP280

(left side, same height as TV)

NS-AP280

(right side, same height as TV)

L = Left Channel

R = Right Channel

C = Center Channel

S = Surround Channel

NS-AP280

(on stand or wall, at least

ear level or preferably higher)

NS-AP280

(on stand or wall, at least

ear level or preferably higher)

8'~10' apart

NS-AP280

(on top or below TV)

6'~8' apart

Couch

Listening Area

Sub

SW-201 Subwoofer (on floor)

YHT-24 QUICK-CONNECT GUIDE

CONNECTING AUDIO COMPONENTS

NOTE: For your convenience, the Yamaha HTR-5440 receiver is equipped with

two switched ac outlets (100 W max.). If desired, use them to power on connected

components (e.g.,CD player) each time the receiver is turned on. However, do not

use them for components equipped with clocks (e.g.,VCR).

Yamaha HTR-5440 Receiver (Rear Panel)

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT SUB

WOOFER

OUTPUT

DVD

OUT(REC)IN(PLAY)

AUX

MD/CD-R

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

AM ANT GND

FM ANT

UNBAL.

TUNER

DVD

D-TV/CBL

OPTICAL

COAXIAL

DIGITAL

INPUT

CENTER REAR

(SURROUND)

–

SPEAKERS

MAIN

–

R L

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

MAINS

OUT(REC)IN(PLAY)

MD/CD-R

L Out

Use RCA Audio Cables For Audio Interconnections

R Out

L Out* R Out*

* Use Playback Or Line Out

** Use Line In

L In** R In**

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

CD Player (Changer)

Cassette Deck,

CD or MD Recorder

YHT-24 QUICK-CONNECT GUIDE

CONNECTING THE YHT-24 SPEAKERS

NS-AP280

(Center Channel)

NS-AP280

(Front Right Ch.)

NS-AP280

(Front Left Ch.)

NS-AP280

(Surround Right)

NS-AP280

(Surround Left)

Yamaha HTR-5440

A/V Receiver

(Rear Panel)

Set IMPEDANCE Selector

to right position.

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT SUB

WOOFER

OUTPUT

DVD

OUT(REC)IN(PLAY)

AUX

MD/CD-R

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

AM ANT GND

FM ANT

UNBAL.

TUNER

DVD

D-TV/CBL

OPTICAL

COAXIAL

DIGITAL

INPUT

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

MAINS

Stripe

Wire

Stripe

Wire

Stripe

Wire

Stripe

Wire

Stripe

Wire

−

−−

−

Cntr R

Surround

Main Speakers

/MONO

VOLUME

INPUT1

FROMAMPLIFIER

OUTPUT

TOSPEAKERS

INPUT2

AUTO

STANDBY

STANDBY-RED

ON-GREEN

OFF

LOW

HIGH

OFF

POWER

0I0

Subwoofer Wiring

SW-201

(Subwoofer)

To AC Outlet

INPUT2 /MONO

RCA

Audio Cable

Speaker

Wiring

BLK TERMINAL = (–) Stripe

❶

Strip 1⁄4" off ends of speaker wires.

❷Push and hold down levers.

❸Insert speaker wires and

release levers.

❶

❸

❷

RED TERMINAL = (+)

YHT-24 QUICK-CONNECT GUIDE

CONNECTING VIDEO CABLES FOR VIDEO COMPONENTS

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch

(on the VCR) to Line position to record from another source

connected to the Yamaha HTR-5440 receiver.

Yamaha HTR-5440 Receiver (Rear Panel)

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT SUB

WOOFER

OUTPUT

DVD

OUT(REC)IN(PLAY)

AUX

MD/CD-R

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

AM ANT GND

FM ANT

UNBAL.

TUNER

DVD

D-TV/CBL

OPTICAL

COAXIAL

DIGITAL

INPUT

CENTER REAR

(SURROUND)

–

SPEAKERS

MAIN

+–

R L

–+

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

MAINS

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Use RCA Video Cables And Jacks For Video Interconnections

Optional 75-ohm

Coaxial Cable

Hi-Fi Stereo VCR

Video In Video Out

Video Out

ANT In

ANT Out

(RF Out)

Video In

Monitor/TV

Satellite Receiver

(or Video Game)

YHT-24 QUICK-CONNECT GUIDE

CONNECTING THE YAMAHA DV-S5350 DVD PLAYER

*Analog Audio Out connections are required for playback of CD-Rs and

recording from DVD to VCR.

Dolby Digital is a trademark of Dolby Laboratories Licensing Corporation.

DTS is a trademark of DTS Technology LLC.

Yamaha HTR-5440 Receiver (Rear Panel)

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT SUB

WOOFER

OUTPUT

DVD

OUT(REC)IN(PLAY)

AUX

MD/CD-R

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

AM ANT GND

FM ANT

UNBAL.

TUNER

DVD

D-TV/CBL

OPTICAL

COAXIAL

DIGITAL

INPUT

CENTER REAR

(SURROUND)

–

SPEAKERS

MAIN

–

R L

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

MAINS

S VIDEO

COMPONENT VIDEO

DIGITAL OUT

VIDEOCOAXIAL

PCM DIGITAL

MPEG DTS

OPTICAL YP

AUDIO OUT

VIDEO OUT

Yamaha DV-S 5350 DVD Player (Rear Panel)

Analog Out*

DVD

VIDEO SIGNAL

AUDIO SIGNAL

DVD

D-TV/CBL

OPTICAL

❶

Remove dust cap.

❷

Align plug with terminal

and insert cable.

NOTES:

• On both ends of the optical cable, align and firmly insert

each plug into its mating terminal.

• During connection, do not bend the optical cable.

• Keep dust caps and reattach them if terminals are not used.

NOTE: Use the optical connection to enjoy 5.1-channel surround sound

found on DVDs recorded in the Dolby Digital or DTS Digital Surround format.

Connecting Optical Cable

Optical Cable (Included)

Use the Included RCA Cables for Analog and Video

Connections Between the DVD Player and Receiver.

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

YHT-24 QUICK-CONNECT GUIDE

CONNECTING AUDIO CABLES FOR VIDEO COMPONENTS

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line

position to record from another source connected to the Yamaha HTR-5440 receiver.

Yamaha HTR-5440 Receiver (Rear Panel)

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT SUB

WOOFER

OUTPUT

DVD

OUT(REC)IN(PLAY)

AUX

MD/CD-R

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

AM ANT GND

FM ANT

UNBAL.

TUNER

DVD

D-TV/CBL

OPTICAL

COAXIAL

DIGITAL

INPUT

CENTER REAR

(SURROUND)

–

SPEAKERS

MAIN

–

R L

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

MAINS

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT

Audio

L Out

Audio

R Out

Audio

L In

Audio

R In

Use RCA Audio Cables And Jacks For Audio Interconnections.

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Audio L Out

Audio R Out

Hi-Fi Stereo VCR

Satellite Receiver

(or Video Game)

YHT-24 QUICK-CONNECT GUIDE

CABLE HOOK-UP(BASIC AND PREMIUM CHANNELS)

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line

switch (on the VCR) to Line position to record from another

source connected to the Yamaha HTR-5440 receiver.

Yamaha HTR-5440 Receiver (Rear Panel)

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT SUB

WOOFER

OUTPUT

DVD

OUT(REC)IN(PLAY)

AUX

MD/CD-R

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

AM ANT GND

FM ANT

UNBAL.

TUNER

DVD

D-TV/CBL

OPTICAL

COAXIAL

DIGITAL

INPUT

CENTER REAR

(SURROUND)

–

SPEAKERS

MAIN

–

R L

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

MAINS

IN VCR 1OUT

VIDEO SIGNAL

VCR 1

OUT

IN VCR 1OUT

VIDEO SIGNAL

VCR 1

OUT

Audio

L In

Audio R InAudio

L Out

Audio

R Out

RCA Audio Cables

ANT In Video In

Video Out

Basic Cable

(From Wall Jack)

ANT In

Premium Cable

(From Wall Jack)

(Channel 3 or 4

Output)

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

RCA Video Cables

Audio

L In

Audio R InAudio

L Out

Audio

R Out

RCA Audio Cables

Video In

Video Out

RCA Video Cables

Hi-Fi Stereo VCR

(Tuner set to Channel 3 or 4)

Descrambler

Converter

Box

YHT-24 QUICK-CONNECT GUIDE

To achieve the optimum volume balance between the

SW-201 Subwoofer and the NS-AP280 Main Speakers,

perform the following procedure:

1. Insert the SW-201’s power plug into a nearby ac outlet.

2. Set the SW-201’s VOLUME control to 0 (minimum

setting), the AUTO STANDBY switch to HIGH, and

the HIGH CUT switch to LOW.

3. Press the SW-201’s POWER switch to ON and power

on all other components.

INPUT1

FROM AMPLIFIER

OUTPUT

TO SPEAKERS

INPUT2 /MONO

AUTO

STANDBY

STANDBY-RED

ON-GREEN

OFF

LOW

HIGH

OFF

POWER

VOLUME

0I0

HIGH CUT

LOW

HIGH

To AC Outlet

SW-201 Subwoofer

(Rear Panel)

AUTO

STANDBY

STANDBY-RED

ON-GREEN

OFF

LOW

HIGH

VOLUME

0I0

HIGH CUT

LOW

HIGH

❷

❸

❶

OFF

POWER

4. Play an audio source and adjust the HTR-5440’s

VOLUME control to a desired listening level.

5. On the SW-201, increase the volume gradually to

adjust the balance the volume between the SW-201

Subwoofer and the NS-AP280 Main Speakers.

NOTE: Once the volume is balanced between the

subwoofer and the main speakers, you can adjust the

volume of your whole sound system by using the

HTR-5440's VOLUME control.

INITIAL ADJUSTMENT OFTHE SW-201 SUBWOOFER

YHT-24 QUICK-CONNECT GUIDE

PROGRAMMING THE UNIVERSAL REMOTE CONTROL

SETTING UPCOMPONENTS

Perform the procedure for each component you own.

At the end of each step 5, the remote control’s processor

will automatically assign the selected component’s

control functions to its own buttons, ready for your use.

SETTING UPYOUR TV

1. Turn on the television set and look up a setup code

for your brand of television (codes are located at the

back of the HTR-5440 Owner’s Manual).

2. On the remote control, press TV.

3. Press and hold both VOLUME buttons at least four

seconds until the indicator LED flashes twice.

4. Using the keypad, enter the four-digit setup code.

The indicator LED will flash twice after your entry.

If the LED did not flash twice, repeat steps 3 and 4.

5. To verify the code works, aim the remote control at

the television set, press TV, and then press POWER.

The television set should turn off. If it doesn’t

respond, use another code for the same manufac-

turer and repeat steps 3 through 5.

The YHT-24 Home Theater package includes a univer-

sal pre-programmed remote control with factory codes

to control your HTR-5440 receiver and most Yamaha

audio components. To program other brands of compo-

nents (i.e., TV, VCR, etc.) or if your Yamaha unit does

not respond, you will need to program the remote

control with the manufacturer’s codes (listed on the

back pages of the HTR-5440 Owner’s Manual).

NOTE: This remote control is designed to control most major

brands of audio and video components. For other units, use

the original remote control supplied with the product.

POWER ON

1. Load the supplied batteries into the remote control.

2. Aim the remote control at the HTR-5440, press

AMP/TUNER, and then press POWER.

3. The receiver should turn on.

Indicator LED

Use Keypad

To Enter

Setup Codes

Turns On

Component’s

Power

Component

Selector

Buttons

Use To Enter

Setup Mode

Use To Enter

Setup Mode

Otros manuales para YHT-24

Tabla de contenidos

Otros manuales de Sistema de altavoces de Yamaha

Yamaha

Yamaha NS-PC5 Manual de usuario

Yamaha

Yamaha NS-70 Manual de usuario

Yamaha

Yamaha S55 Manual de usuario

Yamaha

Yamaha DBR Series Manual de usuario

Yamaha

Yamaha VXC5F Manual de usuario

Yamaha

Yamaha NS-10 Manual de usuario

Yamaha

Yamaha SRT-1000 Manual de usuario

Yamaha

Yamaha YAS-209 Manual de usuario

Yamaha

Yamaha SRT-700 Manual de usuario

Yamaha

Yamaha NS-325F Manual de usuario

Yamaha

Yamaha NS-500M Manual de usuario

Yamaha

Yamaha Installation Series Manual de usuario

Yamaha

Yamaha NS-10MT Manual de usuario

Yamaha

Yamaha YAS-71CU Manual de usuario

Yamaha

Yamaha YSP-5100 Manual de instalación

Yamaha

Yamaha C112V Manual de usuario

Yamaha

Yamaha DBR15 Manual de usuario

Yamaha

Yamaha BR10 Manual de usuario

Yamaha

Yamaha YSP-1 Manual de usuario

Yamaha

Yamaha NS-125FPN Manual de usuario

Yamaha

Yamaha YAS-203 Manual de usuario

Yamaha

Yamaha Ms50dr Manual de usuario

Yamaha

Yamaha BR10 Guía de configuración

Yamaha

Yamaha NS-5290 Manual de usuario

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario

TCL

TCL 6100 Series Manual de usuario