Xylem LSP0712F Manual de usuario

INSTRUCTION MANUAL

IM354_REV 1 PRINTED IN CHINA

Sump and Effluent Pump

Table of Contents

1 Introduction and Safety........................................................................................................ 2

1.1 Introduction....................................................................................................................2

1.2 Safety............................................................................................................................ 2

1.2.1 Safety terminology and symbols............................................................................. 2

1.2.2 User safety..............................................................................................................3

1.3 Protecting the environment............................................................................................4

2 Transportation and Storage................................................................................................. 5

2.1 Examine the delivery..................................................................................................... 5

2.1.1 Examine the package............................................................................................. 5

2.1.2 Examine the unit..................................................................................................... 5

3 Product Description..............................................................................................................6

3.1 General description....................................................................................................... 6

4 Installation............................................................................................................................ 7

4.1 Preinstallation................................................................................................................ 7

4.1.1 Pump location guidelines........................................................................................ 7

4.1.2 Piping checklist....................................................................................................... 7

4.2 Typical installation......................................................................................................... 8

4.3 Wiring and grounding.................................................................................................... 8

4.4 Install the pump............................................................................................................. 9

5 Operation........................................................................................................................... 10

5.1 Start the pump............................................................................................................. 10

6 Maintenance.......................................................................................................................11

6.1 Maintenance guidelines...............................................................................................11

7 Troubleshooting................................................................................................................. 12

7.1 Operation troubleshooting........................................................................................... 12

8 Product Warranty............................................................................................................... 14

Table of Contents

Sump and Effluent Pump INSTRUCTION MANUAL 1

1 Introduction and Safety

1.1 Introduction

Purpose of this manual

The purpose of this manual is to provide necessary information for:

• Installation

• Operation

• Maintenance

CAUTION:

Read this manual carefully before installing and using the product. Improper use of the

product can cause personal injury and damage to property, and may void the warranty.

NOTICE:

Save this manual for future reference, and keep it readily available at the location of the unit.

1.2 Safety

WARNING:

• The operator must be aware of safety precautions to prevent physical injury.

• Operating, installing, or maintaining the unit in any way that is not covered in this manual

could cause death, serious personal injury, or damage to the equipment. This includes

any modification to the equipment or use of parts not provided by Xylem. If there is a

question regarding the intended use of the equipment, please contact a Xylem

representative before proceeding.

• Do not change the service application without the approval of an authorized Xylem

representative.

CAUTION:

You must observe the instructions contained in this manual. Failure to do so could result in

physical injury, damage, or delays.

1.2.1 Safety terminology and symbols

About safety messages

It is extremely important that you read, understand, and follow the safety messages and

regulations carefully before handling the product. They are published to help prevent these

hazards:

• Personal accidents and health problems

• Damage to the product and its surroundings

• Product malfunction

Hazard levels

Hazard level Indication

DANGER:

A hazardous situation which, if not avoided, will

result in death or serious injury

1 Introduction and Safety

2 Sump and Effluent Pump INSTRUCTION MANUAL

Hazard level Indication

WARNING:

A hazardous situation which, if not avoided, could

result in death or serious injury

CAUTION:

A hazardous situation which, if not avoided, could

result in minor or moderate injury

NOTICE:

Notices are used when there is a risk of equipment

damage or decreased performance, but not

personal injury.

Special symbols

Some hazard categories have specific symbols, as shown in the following table.

Electrical hazard Magnetic fields hazard

Electrical Hazard:

CAUTION:

1.2.2 User safety

General safety rules

These safety rules apply:

• Always keep the work area clean.

• Pay attention to the risks presented by gas and vapors in the work area.

• Avoid all electrical dangers. Pay attention to the risks of electric shock or arc flash

hazards.

• Always bear in mind the risk of drowning, electrical accidents, and burn injuries.

Safety equipment

Use safety equipment according to the company regulations. Use this safety equipment

within the work area:

• Hard hat

• Safety goggles, preferably with side shields

• Protective shoes

• Protective gloves

• Gas mask

• Hearing protection

• First-aid kit

• Safety devices

NOTICE:

Never operate a unit unless safety devices are installed. Also see specific information

about safety devices in other chapters of this manual.

Electrical connections

Electrical connections must be made by certified electricians in compliance with all

international, national, state, and local regulations. For more information about requirements,

see sections dealing specifically with electrical connections.

1 Introduction and Safety

Sump and Effluent Pump INSTRUCTION MANUAL 3

1.3 Protecting the environment

Emissions and waste disposal

Observe the local regulations and codes regarding:

• Reporting of emissions to the appropriate authorities

• Sorting, recycling and disposal of solid or liquid waste

• Clean-up of spills

Exceptional sites

CAUTION: Radiation Hazard

Do NOT send the product to Xylem if it has been exposed to nuclear radiation, unless Xylem

has been informed and appropriate actions have been agreed upon.

Recycling guidelines

Always follow local laws and regulations regarding recycling.

1 Introduction and Safety

4 Sump and Effluent Pump INSTRUCTION MANUAL

2 Transportation and Storage

2.1 Examine the delivery

2.1.1 Examine the package

1. Examine the package for damaged or missing items upon delivery.

2. Record any damaged or missing items on the receipt and freight bill.

3. If anything is out of order, then file a claim with the shipping company.

If the product has been picked up at a distributor, make a claim directly to the distributor.

2.1.2 Examine the unit

1. Remove packing materials from the product.

Dispose of all packing materials in accordance with local regulations.

2. To determine whether any parts have been damaged or are missing, examine the

product.

3. If applicable, unfasten the product by removing any screws, bolts, or straps.

Use care around nails and straps.

4. If there is any issue, then contact a sales representative.

2 Transportation and Storage

Sump and Effluent Pump INSTRUCTION MANUAL 5

3 Product Description

3.1 General description

Description

Sump pumps are designed to run intermittently and usually seasonally.

Intended applications

WARNING:

This product can expose you to chemicals including Lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more

information go to: www.P65Warnings.ca.gov.

Specially designed for the following uses:

• Basement draining

• Water transfer

• Effluent transfer

• Filtered effluent

3 Product Description

6 Sump and Effluent Pump INSTRUCTION MANUAL

4 Installation

4.1 Preinstallation

WARNING:

• Disconnect and lock out electrical power before installing or servicing the unit.

• Do NOT install this pump in swimming pools or marine areas.

• Risk of electric shock. This pump is supplied with a grounding conductor and grounding-

type attachment plug. Install or connect to a circuit that is protected by a GFCI, ground

fault circuit interruptor.

• Electrical supply must be in accordance with the specifications given on the pump’s

nameplate.

• Failure to follow these instructions could result in serious personal injury, death and/or

property damage.

These general requirements apply:

• The electrical outlet must be within the length limitations of the pump power cord and at

least four feet above floor level to minimize possible hazards from floor conditions.

• Do not use pumps in water over 140°F (60°C)

• Do not use pumps in mud, sand, cement, oil, or chemicals.

• Do not use a sump pump as a trench or excavation pump, or for pumping sewage,

gasoline, or other hazardous liquids.

• Do not modify the pump in any way.

• Do not lift or carry the pump by the power cord.

• Do not remove any tags from pump or cords.

• Do consider a two pump system with an alarm where an installation may become

overloaded.

• Do inspect and test system for proper operations at least every three months.

• Always verify that the pump nameplate Amps, Voltage, Phase, HP rating match the

power supply.

• Be sure to record the model numbers and serial numbers from the pump for future

reference.

4.1.1 Pump location guidelines

Guideline Explanation

Make sure that the space around the pump and

switch are sufficient.

The switch must be able to operate freely.

The depth must be deeper than the minimum depth

at which the switch turns the pump on.

As an example, if the pump turns on at 7.50”, the

basin must be deeper than 7.50”.

Determine whether a cover is required. Install a cover when:

• Installation is in an area where debris could enter

and clog the pump.

• In a traffic area such as a basement where

children and pets are allowed. A bolt-on or child-

proof cover is recommended.

4.1.2 Piping checklist

Guideline Explanation

Discharge pipe should be the same size as the

pump.

This insures optimum performance. Undersized

pipe can dramatically reduce the flow and waste

energy.

4 Installation

Sump and Effluent Pump INSTRUCTION MANUAL 7

4.2 Typical installation

Typical pump installation in sump; Tether float shown, float not needed on models with

included float.

One type of installation shown below. Note check valve can be installed before union also.

1. Pump electrical plug

2. Piggyback switch plug

3. Grounded wall outlet

4. Float switch

5. Pumping range

6. 1/8” “Relief” hole

7. Union

8. Check valve

9. Pump position

4.3 Wiring and grounding

WARNING:

• Make sure that you have grounded (earthed) the pump, the drive unit, and the controls

before connecting the electrical power.

• Install, earth (ground), and wire the equipment according to the local and National

Electrical Code Requirements.

• Install a power switch near the pump that disconnects all the conductors.

• Disconnect and lock out electrical power before installing or servicing the unit.

• Electrical supply must be in accordance with the specifications given on the pump’s

nameplate.

• All splices must be waterproof. If using splice kits, follow manufacturer’s instructions.

• Select the correct type and NEMA grade junction box for the application and location.

The junction box must insure dry, safe wiring connections.

• Seal all controls from gases present which may damage electrical components.

• Failure to permanently ground the pump, motor and controls before connecting to power

can cause shock, burns, or death.

4 Installation

8 Sump and Effluent Pump INSTRUCTION MANUAL

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bomba de agua de Xylem

Xylem

Xylem Laing Thermotech E-10 Series Manual de usuario

Xylem

Xylem FLYGT APP 412 Manual de usuario

Xylem

Xylem LOWARA Manual

Xylem

Xylem Rule 25S-6W Manual de usuario

Xylem

Xylem G&L A-C 9100 Series Manual de usuario

Xylem

Xylem Rule LoPro LP900S Manual de usuario

Xylem

Xylem Flojet G55 Series Manual de usuario

Xylem

Xylem GOULDS AC8743 Manual de usuario

Xylem

Xylem LOWARA Sekamatik 3MK2 Guía de inicio rápido

Xylem

Xylem FLOJET BevJet Compact Manual de usuario

Xylem

Xylem Bell & Gossett e-80SC Series Manual de usuario

Xylem

Xylem Flygt 3201 Manual del propietario

Xylem

Xylem Lowara SEKAMATIK 200 E UF Manual de servicio

Xylem

Xylem Lowara Z8 Series Manual de usuario

Xylem

Xylem FLOJET R3521/03521 Series Instrucciones de funcionamiento e instalación

Xylem

Xylem FLOJET G257 Series Manual de usuario

Xylem

Xylem LOWARA Hydroquench 3000 MK2 Manual

Xylem

Xylem LOWARA Sekamatik 50 E Manual de usuario

Xylem

Xylem Rule Mate Manual de usuario

Xylem

Xylem Rule A53S Manual de usuario

Xylem

Xylem GOULDS GT IRRI-GATOR IM049R08 Manual de usuario

Xylem

Xylem FLOJET Triplex Series Manual de usuario

Xylem

Xylem e-XC Manual de usuario

Xylem

Xylem LOWARA e-LNE Series Manual de usuario

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario

STA-RITE

STA-RITE ST33APP Manual de usuario