
Xtreme Power Conversion Corporaon
XVRT User’s Manual
Page 3
Uninterrupble Power Supply
Introducon
Thank you for selecng this Uninterrupble Power Supply (UPS). It provides you with protecon for connected
equipment. Please read this manual before installing the XVRT-Series UPS models XVRT-1000, XVRT-1500, XVRT-
2200 and XVRT-3000 as it provides important informaon that should be followed during installaon and main-
tenance of the UPS and baeries, allowing you to correctly set up your system for the maximum safety and per-
formance. Included is informaon on customer support and service, if it is required. If you experience a problem
with the UPS, please refer to the Troubleshoong secon in this manual to correct the problem. If the problem is
not corrected, please collect informaon so that the Technical Support personnel can more eecvely assist you.
Safety Instrucons
ATTENTION: To safely interact with and enjoy all the features and benets of these Xtreme Power Conversion Un-
interrupble Power Supplies (UPS), please read and follow all installaon and operaon instrucons completely.
These UPS are designed to provide power protecon for connected electronic equipment.
CAUTION: Any changes or modicaons not expressly approved by the manufacturer of this device could void the
user’s authority to operate the equipment.
FCC Noce: This equipment has been tested and found to comply with the limits for a Class B Digital Device pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful inter-
ference in residenal installaon. This equipment generates and can radiate radio frequency energy and, if not
installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons.
There is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause
harmful interference to radio or television recepon, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separaon between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
4. Consult the dealer or an experienced technician for help. Any special accessories needed for compliance
must be specied in the instrucon.
CAUTION: A shielded-type power cord is required in order to meet FCC emission limits and to prevent interference
to the nearby radio or TV recepon. It is essenal that only the supplied power cord be used. Use only shielded
cables to connect I/O devices to this equipment.
WARNING: Any changes or modicaons not expressly approved by the manufacturer of this device could void the
user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS: (SAVE THESE INSTRUCTIONS)
This manual contains important safety instrucons. Please read and follow ALL instrucons carefully during the
installaon and operaon of the UPS and Baeries. Read this manual thoroughly before aempng to unpack,
install or operate.
This UPS is intended for Installaon in a Controlled Environment.
CAUTION! To prevent the risk of re or electric shock, install in a temperature and humidity controlled indoor area,
free of conducve contaminants. (Please see specicaons for acceptable temperature and humidity range).
CAUTION! To reduce the risk of electric shock, do not remove the UPS cover. Qualied Service Personnel must