Xoro HRS 8540 Manual de usuario
User's Manual (English)
HRS 8540
1/31
Safety Precaution
This STB has been designed and manufactured to satisfy the international safety
standards. Please read the following safety precautions carefully before operating
this receiver.
Main Supply:
Before operating, please check the units operating voltage is 200-240V AC 50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power
cord or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects
filled with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do
not put the receiver on soft furnishings or carpets. Do not expose the receiver to
direct light or do not place it near a heater or in humid conditions. Do not stack other
electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a
soft cloth or mild solution of washing-up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB or
disconnect it from LNB. Failure would possibly cause damage to the LNB.
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and
licensed service personnel to repair the receiver, or contact your dealer.
2/31
1. Reference
1.1 General Features
DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264)
SCPC & MCPC receivable from Ku and C band satellites
Universal, Single, Single S & C Band Wideband LNB
Sensitive Tuner
Unicable Supported
Blind Scan supported
PAL/NTSC Conversion
8 bits Color on screen display (OSD)
Storing memory: 64 satellite, 3000 transponders and 5000 channels
8 favorite groups
Parental lock supported
Multi-language menu supported
Multi-language audio supported
Multi-language DVB Subtitle output
Electronic Program Guide (EPG)
Teletext
USB 2.0 Interface
3/31
1.2 Accessories
1x Users manual
1x Remote Control Unit
Figure 1.Accessories
4/31
2. Product Overview
2.1 Front Panel
1. Power LED
Power indicator
2. Power button
Switch between operation and standby modes.
2.2 Rear Panel
Figure 3. Rear Panel
1. LNB IN
Connect the satellite antenna cable.
2. HDMI
Connect to the TV using an HDMI cable. (preferred)
3. SPDIF
Digital Audio output (Optical).
Figure 2. Front Panel
5/31
4. USB2.0
One USB 2.0 Host Port.
5. TV SCART
Connect to the TV using a SCART cable.
2.3 Remote Control Unit (RCU)
1. Power button
2. Mute button
3. NUMERIC KEY (0~9): Enter a TV/radio channel
number or menu option number
4. TV/R: Switch between TV and RADIO
5. SLEEP: Set the sleep time
6. EPG (Electronic Program Guide): Display the
program guide
7. MENU: Activate main menu
8. CH▲/CH▼: Changes program
9. VOL◄/VOL►: Change volume in viewing mode.
10. OK: Confirm
11. FAV: Display favorite channel list
12. EXIT: Exit current menu step by step
13. FIND: Quickly find channels which you want
14. AUDIO: Display the audio list
15. DISP: Set the HDMI mode
16. ZOOM: Picture zooming function
17. P▲/▼: Page up/down
18. MARK: Mark a position when play
6/31
19. JUMP MARK: Jump to the marked position
20. RECALL: Switch to the previous viewed channel
21. INFO: Display the program information
22. SUB: Display the subtitle language list
23. DVR INFO: Display the information of the video and the recording
24. TXT: Display the teletext
25. WW:Fast rewind
26. XX: Fast forward
27. X: Play
28. ■/USB: Enter USB menu or stop playing or recording
29. IWW: Previous
30. XXI : Next
31.I I : Pause/Step
32.●:Record
7/31
3. Connection with Other Device
The following diagram shows you the connections among receiver, TV, LNB and
other equipment.
3.1 Connecting to TV
Figure 5. Connecting to TV & VCR
8/31
3.2 Connecting the Antenna
You can connect one fixed dish LNB directly to the LNB IN, or connect at least two
dishes LNB by DiSEqC Switch.
Figure6. Connecting to Dish LNB
9/31
Figure7. Connecting to Dish LNB
Tabla de contenidos
Otros manuales de Receptor de Xoro
Xoro
Xoro HRK 7540 Manual de usuario
Xoro
Xoro HRT 1101 Manual de usuario
Xoro
Xoro HRS 2500 Manual de usuario
Xoro
Xoro HRT 7520 Manual de usuario
Xoro
Xoro HRK 7555 Manual de usuario
Xoro
Xoro HRT 7610 Manual de usuario
Xoro
Xoro HRS 8559 Manual de usuario
Xoro
Xoro HRK 7560 Manual de usuario
Xoro
Xoro HRT 7622 Manual de usuario
Xoro
Xoro HRT 7500 Manual de usuario
Xoro
Xoro HRS9190 Manual de usuario
Xoro
Xoro HRM 8760 CI+ Manual de usuario
Xoro
Xoro HRS 8588 Manual de usuario
Xoro
Xoro HRS 8525 Manual de usuario
Xoro
Xoro HRT 7610 Manual de usuario
Xoro
Xoro HRS 8530 Manual de usuario
Xoro
Xoro HRS 8670 LAN Manual de usuario
Xoro
Xoro HRS 8600 CI Manual de usuario
Xoro
Xoro HRS 2600 Manual de usuario
Xoro
Xoro HRS 8580 Manual de usuario
