XCI TSZ-1 Manual de usuario
5 YEAR
LIMITED
WARRANTY*
Innovation made simple...SM
INSTRUCTION MANUAL
TSZ-1 2 HEATING + 1 COOLING
DUAL FUEL READY
WIRELESS OUTDOOR TEMPERATURE
TRANSMITTER AND RECEIVER KIT
Part No. TOS
Wireless Outdoor Temperature
Transmitter and Receiver Kit Includes:
Transmitter
Antenna
Receiver Module
2 AA Batteries
Accurately displays
current Outdoor Temperature
and enables Dual Fuel capability
on the TrueTouch™ Thermostat
TABLE OF CONTENTS
GLOSSARY OF TERMS ..................................................................................................6
SELECTING A LOCATION...............................................................................................7
MOUNTING THERMOSTAT TO THE WALL ...................................................................8
WIRING LEGEND...........................................................................................................9
HOME SCREEN............................................................................................................14
CONTROL SCREEN ......................................................................................................15
THERMOSTAT OPERATION MODES ...........................................................................16
TEMPERATURE CONTROL MODES .............................................................................17
FAN OPERATION MODES............................................................................................18
MENU SCREEN ...........................................................................................................20
DATE AND TIME SETTINGS........................................................................................22
PROGRAM SETTINGS..................................................................................................23
ENERGY WATCH.........................................................................................................24
SET SCREEN OPTIONS................................................................................................25
VACATION MODE .......................................................................................................26
FILTER MONITOR ........................................................................................................27
ADVANCED SETTINGS - FEATURES SETTINGS ..........................................................28
ADVANCED SETTINGS - SYSTEM CONFIGURATION..................................................30
ADVANCED SETTINGS - DUAL FUEL SWITCH ............................................................31
ADVANCED SETTINGS - DIFFERENTIAL SETTINGS ....................................................32
ADVANCED SETTINGS - TIMER FEATURE ..................................................................33
ADVANCED SETTINGS - HEAT PUMP ........................................................................34
ADVANCED SETTINGS - CALIBRATION ......................................................................36
SIMPLE THERMOSTAT MODE.....................................................................................38
TROUBLESHOOTING ...................................................................................................39
WARRANTY ................................................................................................................40
5
7
SELECTING A LOCATIONGLOSSARY OF TERMS
6
CYCLE RATE - Cycle rate is the frequency that heating or cooling equipment is turned
on during a certain period of time. Cycle rate is often given in units of cycles per hour
(CPH).
DIFFERENTIAL - Differential is defined as the difference between the cut-in and
cut-out points as measured at the thermostat under specified operating conditions. For
example, if the thermostat turns the heating equipment on at 70 degrees F and turns the
heating equipment off at 74 degrees F, then the differential is 4 degrees F.
PROGRAMMABLE THERMOSTAT - A thermostat with the capability of automatically
adjusting temperature set point to pre-selected settings at pre-selected times.
SETBACK - The automatic alteration of the thermostat control point(s) by means other
than manually changing the temperature set point.
SET POINT - The desired temperature setting on an electromechanical or electronic
thermostat.
Install your TrueTouch™ thermostat approximately 5 feet (1.5 meters) above the
floor in an area with good air circulation.
Avoid the following locations:
•Hot or cold air from ducts
•Radiant heat for appliances or sun such as a skylight
•Unheated or uncooled areas: for example an outside wall behind the thermostat.
•Ensure that there is no furniture directly below or beside the thermostat.
WIRING LEGEND
9
RC DH H C Y2 RH W2
OB
W1
EH
GY1
TERMINAL EQUIPMENT STANDARD COLOR
Y1 Cool 1 or Compressor (HP) Yellow
G Fan Green
W1/EH Heat 1 or Emergency Heat (HP) White
W2/OB Reversing Valve or Heat 2 Orange
RH 24VAC Heat Red
Y2 No Connection
C 24VAC Common Blue
H No Connection
DH No Connection
RC 24VAC Cool Unknown
NOTE: The above colors are semi-standard in HVAC industry.
The wiring should be confirmed on both ends before installation.
MOUNTING THERMOSTAT TO THE WALL
8
1. Make sure to turn off the power supply located at the electrical service panel.
All heating and cooling units should be OFF.
2. Separate the backplate from the thermostat by grasping the unit firmly at the
bottom lip and pulling gently until the two piece are apart.
3. Align the backplate to the wall.
4. Mark the three locations for drilling the 3/16” holes required for the plastic
screw anchors.
5. Remove the backplate and drill the three 3/16” holes in these locations.
6. Insert the plastic gyproc screws and ensure that they are snug in the wall.
7. Securely mount the backplate to the wall with the 3 supplied screws.
8. Make the appropriate wire connections based on the specifications of the
household HVAC unit(s). Please refer to Wiring Table to determine the appropriate
wire connections.
9. Place the thermostat on the backplate by firmly but gently from the top aligning
the pins with the screw terminals.
10. Turn on the electricity at the electrical service panel.
WIRING DIAGRAMS
11
WIRING DIAGRAMS
10
HEAT 2
HEAT 1
24V
FAN
COMMON
ONE STAGE COOL AND TWO STAGE HEAT
RC DH H C Y2 RH W2
OB
W1
EH
GY1
COOL
HEAT
24V
FAN
COMMON
ONE STAGE COOL AND ONE STAGE HEAT
RC DH H C Y2 RH W2
OB
W1
EH
GY1
COOL
ONE STAGE COOL
24V
FAN
COOL
COMMON
RC DH H C Y2 RH W2
OB
W1
EH
GY1
WIRING DIAGRAMS
13
WIRING DIAGRAMS
12
HEAT
REV VALVE
24V
FAN
COMPRESSORCOMMON
ONE STAGE HEAT PUMP WITH AUX/EMERGENCY HEAT
RC DH H C Y2 RH W2
OB
W1
EH
GY1
REV VALVE
24V
FAN
COMPRESSORCOMMON
ONE STAGE HEAT PUMP
RC DH H C Y2 RH W2
OB
W1
EH
GY1
HEAT
TRANSFORMER
COOL
TRANSFORMER
CUT
TWO TRANSFORMERS
RC DH H C Y2 RH W2
OB
W1
EH
GY1
HEAT
TRANSFORMER
ONE TRANSFORMER
RC DH H C Y2 RH W2
OB
W1
EH
GY1
Change the Temperature Setpoint(s) using -and +buttons. In
AUTO MODE toggle the HEAT/COOL button (HEAT or COOL will
flash once selected), then raise or lower setpoints as desired.
Select the Thermostat Operation Mode by toggling thermostat
operation mode button.
Select the Temperature Control Mode by
toggling the temperature control mode button.
Select the Fan Operation Mode by toggling the fan oper-
ation mode button.
Access MENU SCREEN to enter into all thermostat features and settings.
Displays Installer Message to review important information.
CONTROL SCREEN
15
>> To access the CONTROL SCREEN, simply touch the HOME SCREEN Screen…
>> From the CONTROL SCREEN, you can:
Current Room
Temperature
Current Outdoor
Temperature
Current Thermostat Operation
Mode
Current Temperature
Control Mode
Current Fan
Operation Mode
Fan Operation Indicator
Vacation Mode Indicator
Security Indicator
Heat setpoint
Cool setpoint
Date
Time
HOME SCREEN
14
>> To return to the HOME SCREEN, simply touch icon at any time!
>> The HOME SCREEN displays the following information:
TEMPERATURE CONTROL MODES
17
>> Based on your HVAC equipment TrueTouch™ thermostat can operate in the
following temperature control modes - AUTO or HEAT or EMERGENCY HEAT
or COOL or OFF.
AUTO - Keeps the room temperature between the selected HEAT
and COOL setpoints by using both the cooling and heating HVAC
units.
HEAT - Only turns on the heating units to regulate room temperature.
EMERGENCY HEAT - Enables the emergency heat (if required).
COOL - Only turns on the air conditioning to regulate room
temperature.
OFF - Will not control temperature. The thermostat will continue to
display the current room temperature, current room humidity and
outdoor temperature.
THERMOSTAT OPERATION MODES
16
>> TrueTouch™ thermostat can operate in PROGRAM MODE or can HOLD a fixed
temperature.
RUN PROGRAM: Initiates the 7-day Programmable Temperature
Control Program with 4 independent events per day. To set up a
custom temperature control program with customizable
Temperature Setpoint and Fan operation mode, refer to Section
PROGRAM SETTINGS (page 27).
HOLD TEMPERATURE: Regulates the room temperature as
determined by the selected Temperature Setpoint.
19
>> TrueTouch™ thermostat can operate the fan in one of the following three modes:
FAN AUTO: The fan runs only when there is a demand for heating
or cooling.
FAN ON: The fan runs continuously
FAN INTERMITTENT: The fan runs 10 minutes per 1/2 hour
providing a convenient way to improve air quality and save energy.
When the fan is running, the animated fan icon will
appear on the HOME SCREEN.
18
FAN OPERATION MODES
Otros manuales para TSZ-1
1
Tabla de contenidos
Otros manuales de Termostato de XCI
Manuales populares de Termostato de otras marcas
EWELLY
EWELLY EW-181 Manual de usuario
Prolon
Prolon T1100 Instrucciones de instalación
Computherm
Computherm Q20 Manual de usuario
Heatmiser
Heatmiser neoStat Manual de usuario
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario
