Xantech HDMI3X1 Manual de usuario

- 1 -

HDMI3X1

User Manual

www.xantech.com

- 2 -

INTRODUCTION

Congratulations on your purchase of the HDMI3X1 Switcher. The HDMI3X1 Switcher allows access

to three HDTV devices, using one HDTV display. The line offers solutions for Home Theater, AV

installation, data center, information distribution, conference room presentation, school and corporate

training environments.

The HDMI3X1 Switcher allows three HDTV HDMI devices to be switched easily in to one HDTV

HDMI compatible monitor or projector. Simply connect your HDTV display to the Switcher’s display

output. The HDMI3X1 Switcher can also be placed at the end of a long HDMI cable to regenerate the

HDMI signal.

•Switches easily between any three HDMI sources

•Maintains 480p, 720p, 1080i, and 1080p resolutions

•Maintains highest HDMI single link video resolution

•Maintains highest HDMI digital audio signal

•Supports HDCP compliant devices

•HDMI or DVI to HDMI cables are used to connect the inputs and switcher output

•Inputs can be switched with the IR remote control

•Installs in seconds

The HDMI3X1 consists of:

(1) 3x1 HDMI Switcher

(3) 6’ HDMI cables (M-M)

(1) 5V DC Power Supply

(1) RMT3-IR

(1) Users Manual

- 3 -

INSTRUCTIONS

1) Connect the supplied cables from the HDTV HDMI sources into the 3x1 HDMI Switcher inputs.

2) Connect the cables from your display (monitor or projector) into the HDMI out of the 3x1 HDMI

Switcher.

3) Plug the 5VDC power supply into the 3x1 HDMI Switcher.

How to Control the 3x1 HDMI Switcher

Use the RMT3-IR remote control to toggle between sources.

RMT3-IR INSTRUCTIONS

1) Remove battery cover from the back of the RMT3-IR remote.

2) Verify that dip switches 1 & 2 are in the down (OFF) position.

3) Insert the battery, hold the battery so that you can see the positive side facing up. The side that is

not marked must be facing down.

4) Test the RMT3-IR remote by pressing ONLY one button at a time. The indicator light on the remote

will flash once each time you press a button. WARNING: Do not press multiple buttons

simultaneously and do NOT press buttons rapidly. These actions will cause the remote to reset and

steps 1-4 will have to be repeated.

Note: The RMT3-IR ships with two batteries. One battery is required for operation, the second battery

is complimentary.

The optional IR extender allows you to relocate your HDMI Switcher and still have IR control of the

HDMI Switcher

RMT3-IR CODE CONFLICTS

There are matching pairs of dip switches underneath the Switcher unit and under the remote battery

cover. Switch 1 & 2 on the Remote and Switch 1 & 2 underneath the unit are the matching switches.

These switches need to be matched for the remote to communicate with the switcher. There are 4

possible sets of IR codes and at least one of these sets should be able to resolve any IR conflicts with

other home theater devices.

- 4 -

- 5 -

IREXTENDER

1) Plug the IR extender into the Remote port on the front of the Switcher Unit

2) Flip the Dip Switch 1 underneath the unit to the ON position

SPECIFICATIONS

Video Amplifier Bandwidth 1.65 Gbps

Input Video Signal 1.2 volts p-p

Input DDC Signal 5 volts p-p (TTL)

Single Link Range 1080p / 1920 x 1200

Input Connector Type HDMI type A 19 pin female

Output Connector Type HDMI type A 19 pin female

Power Supply 5V DC

Power Consumption 5 watts (max)

Dimensions 9.375”W x 1”H x 2.75”D

Shipping Weight 4 lbs.

Technical Support

Hours: 7AM-5PM Pacific

Phone: 800.843.5465

press 2 for Tech Support

Fax: 800.492.6832

email: [email protected]

Mailing Address

Xantech Corporation

13100 Telfair Avenue, 2/F

Sylmar, CA 91342

This document is copyright protected. No part of this manual may be copied or reproduced in any

form without prior written consent from Xantech Corporation.

Document Number 08905127A

Tabla de contenidos

Otros manuales de Cambiar de Xantech

Xantech

Xantech IRS232A Manual de usuario

Xantech

Xantech D5SH4 Manual de usuario

Xantech

Xantech 599-00 Manual de usuario

Xantech

Xantech AC1 Manual de usuario

Xantech

Xantech 680-10 Manual de usuario

Xantech

Xantech SPLCDCB100 Manual de usuario

Xantech

Xantech D5SH Manual de usuario

Xantech

Xantech D5RH Manual de usuario

Xantech

Xantech XT-HDMI-MX42-4K18G Manual de usuario

Xantech

Xantech HD44C Manual de operación y mantenimiento

Xantech

Xantech 686-10 Manual de usuario

Xantech

Xantech AC2 Manual de usuario

Xantech

Xantech HDMI4X1 Manual de usuario

Xantech

Xantech XT-SW21-4K18G Manual de usuario

Xantech

Xantech XT-SW41-4K18G Manual de usuario

Xantech

Xantech RS232IR Manual de usuario

Xantech

Xantech RS41AV Manual de usuario

Xantech

Xantech DCH4 Manual de usuario

Xantech

Xantech D5XH Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario