XAiOX TrapScout SiRF III Manual de usuario
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -1-
User’s Manual
Bluetooth GPS Receiver
XAiOX TrapScout SiRF III
Speed Camera Detector Functionality and Voice Prompt
Copyright©2007 XAiOX Technologies, USA
All rights reserved
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -2-
Table of contents
1. Introduction ……………………………………………….…………………………………………………………. 3
1.1 Read Me First ……………………….………………………………………………………………………. 3
1.2 Overview ……………………..……..…………………………………………………………………………. 3
1.3 Features ……………………………………………………………………………………………………………………… 4
2. Hardware Description ………..………………………………………..……………………………………… 5
3. Box Contents ……………………..………………………………………………………………………………… 7
4. Volume control/Database update …………………………………………..………………………….. 8
5. Auto Power ON/OFF ………………………………………………………………………..…………………… 9
6. Power OFF XAiOX TrapScout ………………….………………………………………………………….. 9
7. General Important Notes …………………………………………………………………………………….. 10
8. Software-Installation – Pocket PC CE ……………………………………………………………….. 11
9. Working Modes ………………………………………………….…………………………….. 17
Modus A: GPS + Bluetooth + Speed Camera Detector ………….…………………………. 17
Modus B: GPS + Speed Camera Detector (Bluetooth OFF) …………………………………. 19
Modus C: G-Maus + Speed Camera Detector (Bluetooth OFF) …………………………. 20
10. Technical Specifications …………………………………………….………………….………………….. 21
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -3-
1. Introduction
1.1 Read Me First
•The battery must be charged for at least 8 hours for ‘INITIAL’ use. The LED2 (GREEN) will
turn off after 3 hours’ charging, please keep on charging for 5 more hours. Thereafter, for
each time charging the battery, please fully charge for 3 hours.
•We strongly recommend that remove the battery if the device will not be used for over 2
weeks.
•For fast data tracking purpose staying still before get fixed is recommended.
(first FIX then GO!!)
•Please note that the device will only receive the signal under open sky. Therefore, putting
the device under the windshield is recommended.
1.2 Overview
TrapScout Bluetooth GPS receiver, a total solution of GPS Bluetooth wireless technology, is high
quality design dedicated to the user who is usually carrying a portable device such as PDAs/smart
phones all the time.
TrapScout allows 22 hours continuous use with a single battery charge. TrapScout uses GPS
technology to provide accurate warnings to fixed and mobile speed cameras in the road ahead.
The unit also includes some nice features, such as vibration sensor for power management and
POI update.
The TrapScout does not only transmit satellite information to the PDA or smart phone via
Bluetooth but also become a G-Mouse GPS receiver through a data cable to deliver satellite
information to the device without Bluetooth interface.
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -4-
1.3 Features
•16-Channel-Tracking
•Cold-/Warm-/Hot-Start: 45/38/6 seconds
•Reacquisition-Time: 1 second
•Supported Standard NMEA-0183
•Compatible with Bluetooth-Devices with Serial Port Profile (SPP)
•Small, slim and lightweight device that fits well in your hand
•Voice-Announcement for GPS-, Bluetooth- und Battery-Status
•Auto-on-/off-function: The device switches into sleep-mode if the GPS-coordinates do
not change for 15 Minutes. It re-engages approx. 3 seconds after the device
recognised a vibration
•Loudspeaker
•Three LEDs on the upper side of the device display Bluetooth- and GPS-reception. A
on/off switch is located on the upper side, too.
•Portable Navigation (PDA, Pocket PC etc.)
•With fully recharged Battery (1100mA Lithium-Ion-Battery) up to 22 hours and
approx. 200 hours standby
•High sensitive -152 dBm build in GPS-Receiver, active antenna and Bluetooth-
Receiver
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -5-
2. Hardware Description
Status-Tabelle
LED Colour Status
RED OFF GPS not yet fixedLED1
SAT RED FLASHING GPS fixed. Will transfer data, when BT connection is on.
GREEN ON Unit is switched on (flashing 1 x per second)
GREEN ON Unit is in charging process (flashing 2 x per second)
LED2
Akku
GREEN OFF Unit is fully charged
BLUE ON Flashing very quickly (in pairing mode)LED3
BT BLUE ON Bluetooth connected (flashing 1 x per second)
Low battery: Notified by voice “battery low”
when battery low.
Battery empty: Notified by “beep” sound and
device switches off.
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -6-
GPS Bluetooth operates on OS with Bluetooth function that supports SPP
In order to avoid any unexpected problem,
DO NOT attempt to change the default baudrate
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -7-
3. Box Contents
•XAiOX TrapScout Bluetooth GPS-Receiver
•AC Adapter (220V/110V)
•Car Charger
(Input 12V, Output 5V)
•1100mA Lithium-Ion rechargeable battery
•User’s manual (CD-ROM)
•Gel Pad Holder
Gel Pad Holder
Car charger AC Adapter 1100mA Li-Ion-Battery
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -8-
4. Volume control/Database update
1. Volume up/Add data
a. Volume up: press shortly the “volume up” button (notified by “beep” sound)
b. Add data: press “volume up” button for 3 seconds
2. Volume down/Erase data
a. Volume down: press shortly the “volume down” button (notified by “beep” sound)
b. Erase data: press “volume down” button for 3 seconds
Remarks:
A. Add/Erase data has to be made under GPS positioned status
B. User can edit database via dedicated software (User_DB_modify.exe, please refer to
appendix A) in document CD
C. Notified by voice “data add complete”/”data delete complete” if add/erase is completed
D. Notified by voice “data add failed” if TrapScout is not under positioned status
E. Notified by voice “data delete failed” if database is empty
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -9-
5. Auto Power ON/OFF
The TrapScout equipped with vibration sensor for power management (auto power on or goes to
sleep mode)
a. Auto power on/off function is available under all working modes except G-mouse mode
b. Goes to sleep mode if vehicle stays still for 15 minutes
c. Auto power on in 3 sec. when detecting vibration (back to previous working mode)
6. Power OFF the XAiOX TrapScout
Press power button for 1 second second to switch off the TrapScout.
We strongly recommend that close the E-map before turning off the XAiOX TrapScout,
in order to avoid any possible PDA /Smart phone freeze
User’s Manual XAiOX TrapScout SiRF III Bluetooth GPS Receiver -10-
7. General Import Notes
Car Charger
At the tip of the car charger you find a removable cover (screw able). Behind this cover there is a
changeable 1.5A-fuse. If you detect any malfunction please check this fuse first and replace it if
necessary
Installing your GPS Receiver to a PDA, Pocket-PC, Smart-Phone, etc.
The following instructions how to install the GPS receiver to your device is based on iPaq HP. It is
possible that the images shown differ to the screen of your device. Unfortunately we cannot show
samples of all different devices because there are too many on the market.
Please refer to the user’s manual of your device if you need further help.
Tabla de contenidos
