Woxcon TPUH630 Manual de usuario

TPUH630

HDMI2.0 HDBaseT Extender

Version: TPUH630_2018V1.0

User Manual

HDMI2.0 HDBaseT Extender

Preface

Read this user manual carefully before using this product. Pictures shown in this

manual is for reference only, different model and specifications are subject to real

product.

This manual is only for operation instruction only, not for any maintenance usage. The

functions described in this version are updated till April 2017. In the constant effort to

improve our product, we reserve the right to make functions or parameters changes

without notice or obligation. Please refer to the dealers for the latest details.

All product function is valid till 2017-4-13.

Trademarks

Any other trademarks mentioned in this manual are acknowledged as the properties of

the trademark owner. No part of this publication may be copied or reproduced without

the prior written consent.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

HDMI2.0 HDBaseT Extender

SAFETY PRECAUTIONS

To i n s u r e t h e best from the product , p l e a s e read all instr u c t i o n s carefully before u s i n g

the device. Save this manual for further reference.

l Unpack the equipment carefully and save the original box and packing material for

possible future shipment

l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

l Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

l Using supplies or parts not meeting the products’ specifications may cause

damage, deterioration or malfunction.

l Refer all servicing to qualified service personnel.

l To prevent f i r e o r shock hazard, do not e x p o s e t h e un it to rain, m o i s t u r e or install

this product near water.

l Do not put any heavy items on the extension cable in case of extrusion.

l Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

l Install the device in a place with fine ventilation to avoid damage caused by

overheat.

l Keep the module away from liquids.

l Spillage into the housing may result in fire, electrical shock, or equipment damage.

If an object or liquid falls or spills on to the housing, unplug the module immediately.

l Do not twist or pull by force ends of the optical cable. It can cause malfunction.

l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

l Unplug the power cord when left unused for a long period of time.

l Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

HDMI2.0 HDBaseT Extender

Contents

1. Introduction .................................................................................................................. 1

1.1 Brief Introduction ................................................................................................ 1

1.2 Features ............................................................................................................. 1

1.3 Package List ....................................................................................................... 1

2. Panel Description ........................................................................................................ 2

2.1 Transmitter ......................................................................................................... 2

2.2 Receiver ............................................................................................................. 3

3. System Connection ..................................................................................................... 5

3.1 Usage Precautions ............................................................................................. 5

3.2 System Diagram ................................................................................................. 5

4. Specification ................................................................................................................ 8

5. Troubleshooting & Maintenance .................................................................................. 9

6. After-sales Service ..................................................................................................... 11

HDMI2.0 HDBaseT Extender

1. Introduction

1.1 Brief Introduction

This product is an ultra-thin HDMI2.0 HDBaseT Extender, includes Transmitter and

Receiver. It extends 3840x2160@60Hz 4:4:4 (Max) HDMI signal up to 100m via

Cat5e/6 based on HDBaseT technology, providing a good solution for long-distance

transmission application.

Flexible power design (24V PoC) allows this extender to be powered at either the

Transmitter or Receiver end, and only one power supply is required.

The extender boasts 3 Ethernet ports to work as Ethernet Switch, with any one

connecting to LAN, other ports access Ethernet.

The bidirectional wideband IR, bidirectional RS232 pass-through capabilities make the

extender compatible with most control systems. Furthermore, this product supports

ARC function, making it more flexible.

1.2 Features

§ Support HDMI 2.0, 3840x2160@60Hz 4:4:4, HDR.

§ HDCP2.2 pass-through.

§ Extends 3840x2160@60Hz 4:4:4 (Max) signal up to 100m.

§ Supports bi-directional IR/RS232 pass-through.

§ Supports bi-directional 24V PoC.

§ Works as Ethernet Switch.

§ LEDs indicate the system status.

1.3 Package List

§ 1 x Transmitter

§ 1 x Receiver

§ 1 x Power Adapter (DC24V 1.25A)

§ 2 x 3-pin Phoenix Connector

§ 4 x Mounting Ears & 4 x Screws

§ 8 x Plastic Cushions

§ 1 x User Manual

Confirm if the product and the accessories are all included, if not, please contact

with the dealers.

HDMI2.0 HDBaseT Extender

2. Panel Description

2.1 Transmitter

No.

Name

Description



Power LED

RED when DC power present.



IR IN

Connect with IR Receiver to collect infrared signal, work with

far-end IR OUT port.



IR OUT

Connect with IR Emitter to send infrared signal, work with

far-end IR IN port.



RS232

Serial port, supports bi-directional RS232 pass-through.



RS232 MODE

switcher

§ CTRL: RS232 pass-through control mode;

§ UPDATE A: Update Valens IC program, connect a PC

to the RS232 port, and then double-click the update file

(.bat).

§ UPDATE B: Update compression IC program, the

upgrade method is the same as the above UPDATE A.



ARC Switcher

ON: Enable ARC function; OFF: Disable ARC function



HDMI IN

Connect with HDMI source.



SPDIF OUT

Digital audio output port.



L+R OUT

Stereo analog audio output port.



ETHERNET

Ethenet port, work as Ethernet Switch together with the 2

Ethenet ports of Receiver. Connect router to any one port,

the others are able to access LAN.

IR IN IR OUT

ARC

OFF

UPDATE A UPDATE B

CTRL

Tx Rx

123456

78910 11 12

HDMI2.0 HDBaseT Extender

⑪

HDBT OUT

Connect to the Receiver via Cat5e/6 cable.

⑫

DC 24V

Connect with the included power adapter.

2.2 Receiver

No.

Name

Description



Power LED

RED when DC power present.



IR IN

Connect with IR Receiver to collect infrared signal, work

with far-end IR OUT port.



IR OUT

Connect with IR Emitter to send infrared signal, work with

far-end IR IN port.



RS232

Serial port, supports bi-directional RS232 pass-through.



RS232 MODE

switcher

§ CTRL: RS232 pass-through control mode;

§ UPDATE A: Update Valens IC program, connect a PC

to the RS232 port, and then double-click the update

file (.bat).

§ UPDATE B: Update compression IC program, the

upgrade method is the same as the above UPDATE



ARC Switcher

ON: Enable ARC function; OFF: Disable ARC function.



HDMI OUT

Connect with HDMI display.



SPDIF IN/TO TX

Tosli n k audio input port, connect with audio source.

IR IN IR OUT

ARC

OFF

UPDATE A UPDATE B

CTRL

Tx Rx

123456

78910 11

HDMI2.0 HDBaseT Extender

Coaxial audio input port, when this port is connected with

audio sourcethe Tosli n k a u d i o i n p u t p o r t shouldn’t be

connected.



ETHERNET

2 Ethenet ports, work as Ethernet Switch together with the

Ethenet port of Transmitter. Connect router to any one port,

the others are able to access LAN.



HDBT IN

Connect to the Transmitter via Cat5e/6 cable.

⑪

DC24V

Connect with the included power adapter.

This extender to be powered at either the Transmitter or Receiver end, and only

one power adaptor is required.

HDMI2.0 HDBaseT Extender

3. System Connection

This extender has a good application in occasions where high-definition AV distribution,

long-distance transmission, Ethernet Switch are needed, such as computer realm,

monitoring, big screen displaying, meeting room, education and bank & securities

institution etc.

3.1 Usage Precautions

§ System should be installed in a clean environment and has a prop temperature

and humidity.

§ All of the power switches, plugs, sockets and power cords should be insulated

and safety.

§ All devices should be connected before power on.

3.2 System Diagram

This extender boast ARC (Audio Return Channel) function, which enables a display via

a single audio/ HDMI cable, to send (upstream) audio to amplifiers/ speakers,

increasing user flexibility.

Mode

ARC Switcher Status

Description

Transmitter

Receiver

①

The audio signal can be transmitted from the

HDTV display back to HDMI IN, SPDIF OUT

and L+R OUT ports.

②

OFF

The audio signal can be transmitted from the

SPDIF IN to SPDIF OUT and L+R OUT ports.

HDMI2.0 HDBaseT Extender

①

Transmitter: ARC ON; Receiver: ARC ON

Figure 3-1 System Diagram (ON ON)

②

Transmitter: ARC OFF; Receiver: ARC OFF

Figure 3-2 System Diagram (OFF OFF)

§ When using ARC feature, please connect the amplifier via HDMI cable.

§ All utilized devices including the HDMI cable should support ARC.

§ System Diagram shown in this manual are for reference only, more specific

schemes depend on real devices.

4K 100m 1080P 150m,

Router

4K Blu-R ay

Laptop

IR Emitt er

ARC ON

IR Rec ei ve r TV Remot e HDTV

IR Emitt er

IR Recei ve r

Laptop Laptop

Amplifier

Speaker

SpeakerSpeaker

ARC

PoC

Blu-Ray

Remote

HDMI:

IR:

RS232:

CATx:

Power:

ARC

4K 100m 1080P 150m,

Router

4K Blu -Ra y

Laptop

IR Emi tter

IR Rec eiv er TV R emo te HDTV

IR Emi tter

IR Rec eiv er Blu-Ray

Remote

Laptop Laptop

HDMI:

IR:

RS232:

CATx:

Power:

AmplifierSpeaker

ARC

PoC

ARC OFF

Tabla de contenidos

Otros manuales de Extensor de Woxcon

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario