WOWME SOS Band+ Manual de usuario
SOS Band+
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –17
Čeština
18 –32
Slovenčina
33 –47
Magyar
48 –62
Deutsch
53 –78
Français
79 –94
3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Getting Started
Preparation Before Putting Into Operation
Check, if you have all accessories in the package.
•Instruction manual
•Charging cable
•EU charging adaptor
Prepare the SIM card according to the following instructions.
•SIM card must be in the NANO size (see the image below).
•PIN code must be deactivated. You can deactivate the PIN when you insert the
SIM card into your mobile phone.
•For the correct function of the device, internet and call services must be activated
on the SIM card.
Note: Average data consumption of the device is about 100 MB per month. Ensure that
the SIM card is fully compatible with 4G network.
Warning: If there is no data plan active or enough money on your prepaid card, watch
will rapidly discharge as it repeatedly tries to start the corresponding connection.
Location and communication services are not available.
Fully charge your device with the supplied USB cable. Connect the USB cable into the
power adapter enclosed in the package and connect the magnetic charging pins to your
device. After few moments, screen will turn on automatically and you will see the
charging indicator turn on. Use power adapter (5V/1A) included in package to ensure
correct charging .Do not use any faster charger.
5
Inserting the SIM Card into Your Device
The device must be turned off before inserting the SIM card. You can long press the
power button to turn it off. Unscrew and remove the SIM card cover and insert your SIM
card in direction shown on the picture below. Gently push the SIM card into the device
until it clicks. Then close the cover and tighten screw carefully.
Turn on the Device
After the device is fully charged and the SIM card is inside, you can turn on the device
using the main button. It takes approximately three minutes to load GSM or GPS signal.
It is possible that the GPS signal will not load inside of the building. We recommend
taking the device out before the first use.
6
Pairing
Download the WowME Tracker app
Full functionality and all settings of the device are available in the
WowME Tracker app. Use the following QR code to download the
app or search WowME Tracker on App Store or Play Store.
Register Your Device
After the first registration in the app, you will be asked to register your device. Scan the
QR code with registration code or type in the registration number. You can find the
registration number and the QR code on a code tag included in the package. Then you
can log into the app again and start using all its functions.
Scan the QR code from the tag with
registration codes (included in the
package) or type in the code shown
below the QR code.
7
Know Your Device
Key Functions
SOS Button/Power Button
•Turn the device on by pressing the button for five seconds when the device is
turned off.
•After pressing for five seconds, you can start SOS call for 3 SOS numbers. More
details about this function are in the “Safety Features” chapter.
Please note: It is not possible to turn off the device when it is synced and connected to
your account at WowME Tracker app (you can use “Remote Shutdown” function in the
WowME Tracker app instead). If the device turns off instead of beginning SOS call, it can
be caused by the following:
oThe device is in an area without mobile network coverage.
oThe device is not paired with any account in the WowME Tracker app.
Please see the chapter “Pairing” for instructions on how to pair your
devices.
Speed Dial Buttons
By pressing one of the speed dial options, the user can quickly dial saved phone
number.Under button number 1 you can call phone number saved as number 1 SOS
number in the WowME Tracker app. The same goes for number 2.
Speaker
Speed dial
SOS / Power button
Voice message
Microphone
SIM slot
8
Voice Message Button
•Press briefly to listen to the last voice message.
•Press and hold for recording of a new voice message. Green light lights up during
voice recording. Message will be sent automatically after releasing the green
button.
Indication Light
Colour
Status
Meaning
Powered on
Red (network)
Slow flash
Signal searching
Fast flash
Signal received
Blue (GPS)
Slow flash
Positioning
Fast flash
Position uploaded
Charging
Red indicator
Slow flash
Charging
Always on
Fully charged
Blue indicator
Slow flash
Charging
Slow flash
Fully charged
Low battery: The red indicator flashes slowly.
9
Device Functions
All settings are available in the WowME Tracker app or also directly in the menu of your
device.
App Menu
All settings listed below, and others can be selected in the WowME Tracker app.
Location Services
For first use of the GPS watch, we recommend testing the device outdoors to ensure
correct synchronization with the GPS position from satellites and get correct local
coordinates in the WowME Tracker. Device tracking will be more accurate when you
later bring it back inside.
If you control more devices in the WowME Tracker app (maximum of 50 devices on one
account), you need to log out and log in again. All settings will be automatically updated
regarding possibilities of each device.
By clicking on your
device name, you
can choose from
the list of devices
in case you use
more than one
WowME GPS
Tracking watch or
SOS band.
Quick access to
Contacts, voice
and text messages
and direct dial the
device.
Easily check the
last update of
location of
theguarded device
on the home
screen.
10
Device can track position in three modes:
•Normal mode (once every ten minutes)
•Saving mode (once an hour)
•Sleep mode (position is updated by manual activation in the WowME Tracker app
only)
Chosen mode influences the battery consumption. For basic overview about the location
of your loved one, we recommend using longer update frequencies to ensure longer
service of your device without charging. In saving mode, battery life of the device is
approximately two days, while in normal mode it lasts for about one day.
After clicking on map on the main screen of WowME Tracker app, you can see the
position of your watch. You can check when this position was updated for the last time
and what type of location service was used (GPS, WiFi or LBS).
By pressing manual location button (green mark, as seen on the screenshot below), you
can manually refresh real-time location. Firstly, you will get quick update using GPS and
after less than a minute you shall get more accurate GPS position when available. If your
device isn’t receiving GPS signal, only LBS location will be displayed.
List of devices
Location of selected device
Your location
Safety zone set-up
Device tracking history
Switch map type
Update location manually
Detailed information about
device location and battery
status
Tabla de contenidos
Idiomas:
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario