Wolfcom Vision Manual de usuario
WOLFCOM ENTERPRISES
Wolfcom Vision
Body Worn Camera User Manual
Junior Sutitanom 1/15/2015
The contents of this page are protected by copyright laws. This user manual is not to be posted online
on any website or forum without written authorization from Wolfcom Enterprises.
2 | Page
Table of Contents:
Overview ………………………………………..………………………………..…………………….
Wolfcom Vision Body Camera Layout ……………………………………………………………
Getting to know the Wolfcom Vision Police Body Worn Camera System …………………
Featured Technologies in Wolfcom Police Body Worn Cameras …………………………...
Administrator set up section:
Installing the Wolfcom Vision LE Edition Configuration Software……………………………………….........
Installing the Wolfcom Vision USER Software………………………………………......................................
Configuring the Wolfcom Vision…………………………………………………………………………………...
Configuration Setup and User guide for Normal Mode…………………………………………………………
Configuration Setup and User guide for Easy Mode……………………………………………………………
Configuration Setup and User guide for Pre Record Mode…………………………………………………….
User instruction guide:
User guide for Normal Mode ……………………………………………………………….
How to Start Recording Video ……………….…………………..………………………………….…..
How to Activate Video Recording ……………………………………………………..………………..
How to Deactivate Video Recording ……………………………………...…………………………….
How to Take Digital Photos ……………………………………………………………………………...
How to use the Voice recorder …..……………………………………………………………………...
How to charge ………………………………………..…………….....................................................
How to playback files …………………………………………………………………………………….
How to extract files……………………………………………...………………………………………...
How to use the Flashlight………………………………………………………………………………...
How to use as Car DVR…………………..………………………………………………………………
How to reboot the unit………………….…………………………………………………………………
User guide for Easy Mode …………………………………………………………………..
How to Start Recording Video ……………….…………………..………………………………….…..
How to Activate Video Recording ……………………………………………………..………………..
How to Deactivate Video Recording ……………………………………...…………………………….
How to charge ………………………………………..…………….....................................................
How to playback files …………………………………………………………………………………….
How to extract files……………………………………………...………………………………………...
How to use the Flashlight………………………………………………………………………………...
How to reboot the unit………………….…………………………………………………………………
User guide for Pre Record Mode …………………………………………………………..
How to Start Recording Video ……………….…………………..………………………………….…..
How to Activate Video Recording ……………………………………………………..………………..
How to Deactivate Video Recording ……………………………………...…………………………….
How to charge ………………………………………..…………….....................................................
How to playback files …………………………………………………………………………………….
How to extract files……………………………………………...………………………………………...
How to use the Flashlight………………………………………………………………………………...
How to reboot the unit………………….…………………………………………………………………
How to use the Wolfcom Vision User PC software: ……………………………….…………..
Wolfcom Vision Set Up Manager Settings Guide ………………………………….…………...
Wolfcom Vision User PC software Guide …………………………………………….………...
World Time zone Guide ……………………………………………………………………………..
Wolfcom Vision Docking Station Manual ………………………………………………………..
3
4
4
5
6-10
11-16
17
18-22
23-26
27-30
18-22
19
19
20
20
20
21
21
21
21
22
22
23-26
24
24
24
25
25
25
26
26
27-30
29
29
29
29
29
30
30
30
31
32-34
35
36
37-43
Trouble Shooting Guide …………………………………………………………………...………..
44
3 | Page
Overview
The Wolfcom Vision™ main unit is an all-in-one, self-contained digital video recorder with a rotating
camera head, built-in rechargeable battery, and 32GBs of internal memory. The unit can be used
alone as a fully functioning body worn camera. If so desired, an external clip on camera can be
plugged into the main unit for Point of View (POV) recording. The main unit has auxiliary input and
output ports allowing the unit to be connected to a PC or external battery. The unit weighs only 2.2
ounces with a dimension of 2.9 inches high by 1.5 inches wide by 0.6 inches thick, making it one of
the smallest and lightest police body worn cameras in the world.
The Wolfcom Vision™ can record and store over 18 hours of video, can take over 28,000 digital
photos, and can record over 180 hours of audio. In short, the unit is a video camera, a digital camera,
and a voice recorder, combined into one single lightweight unit. The Wolfcom Vision has a high
quality 120° degree wide angle camera lens that can be rotated up or down allowing the officer to
point the camera in the correct direction according to his or her height or stature. Video recording
quality is exceptional and configurable with selectable recording quality from 1080P true HD all the
way down to 640x480 resolution allowing police departments the ability to adjust the camera
resolution according to their memory storage capacity.
4 | Page
Wolfcom Vision Body Camera Layout
Front View
Front View
Top View
Back View
Getting to know the Wolfcom Vision Police Body Worn Camera System.
1. One Touch Record switch (OTR) is used to start and stop recording or to power on the unit.
2. Snap Shot Button is used to snap photos or to start recording if in Pre-Record Operating Mode.
3. Public Awareness Light is used to alert the public that recording is in progress.
4. Super Bright LED used for Digital camera flash or as a flashlight.
5. 120 degrees up and down rotating camera head. 120 Degrees wide angle view.
6. Function Switch switched between Normal Function, Video Out Function, and Car Mode Function.
7. 10 pin USB Port is used to attach optional accessories, charging, and transferring files.
8. Reset Button is used to reset or reboot the unit.
9. First of 2 microphones
10. Second of 2 microphones
11. A/V input for external camera. Features Critical Re-Connect Technology (CRC).
12. Mode Switch is used to switch between Video Mode, Digital Camera Mode and Voice Recorder Mode.
13. Recording Status indicator can be seen by the officer but not by the public.
14. Flashlight Activation switch. (Works only when the unit is powered on or recording)
15. Lanyard Loop is used as a secondary safety harness to prevent accidental loss.
Note* Function description for the switches are printed on the back of the unit.
5 | Page
Developed by Wolfcom Enterprises, this patent Pending technology protects the user from
loss of audio and video recording should the external camera or POV (Point of View)
camera become detached from the main recording unit.
Critical Re-Connect Technology (CRC).
Point of View (POV) body cameras are worn on the head of the user so that audio and
video from the camera records the users point of view perception. Point of view body
cameras normally consist of two parts. The main recording unit and the external POV
camera.
The main recording unit typically contains a battery and memory for storage and is worn
on the belt or chest area of the user. The external POV camera typically has a built-in
microphone and is connected or plugged into the main unit via a cord. When recording is
activated, audio and video signals from the external POV camera are sent to the main unit
and recorded onto the memory.
The Problem
In the event the external POV camera is disconnected from the main unit, all audio and
video recordings will cease and the body camera will become inoperable. Some police
officers wear POV cameras and will at times find themselves in a physical altercation with
a suspect. During a struggle or pursuit, the POV camera may be yanked and disconnected
from the main unit resulting in loss of audio and video recording from that point on.
The Solution
Wolfcom Enterprises Critical Re-Connect technology addresses this problem.
Our POV camera system also consist of 2 parts. The main recording unit and the external
POV camera with built-in microphone. However, our main recording unit also has a built-in
camera and microphone. In the event the external POV camera is disconnected from the
main recording unit, the built-in camera and microphone of the main unit will activate and
audio and video recording will resume.
Alerts
As soon as the main recording unit senses that the external POV camera has been
disconnected, it will vibrate and chirp to alert the user that the external POV camera has
been disconnected and will then activate its built-in camera and microphone to resume
audio and video recording.
Anti Video Deactivation (AVD) Technology (Patent Pending)
With other body cameras, in the event of a fight or struggle with a suspect, the video
deactivation switch or button might be accidently pressed or bumped resulting in the unit
being powered off. With the Wolfcom Vision patent pending Anti Video Deactivation
Technology, The unit will continue to record no matter what.
The last thing your department needs is video that is lost from an unreliable body camera.
Always look for the AVD symbol when purchasing a body camera.
Future Technology Ready (FTR)
The Wolfcom Vision is Future Technology Ready. We designed our body camera to be
ahead of its time and ready to integrate with future technology that either doesn't exist yet
or is still at its infancy stage. This means that it will be several years before the Wolfcom
Vision becomes outdated.
6 | Page
Instructions for Installing the Wolfcom Vision LE Admin Edition Configuration Software
For
-------------------------------------------------------------------------------------------------------------------------------------
Important! Do not connect your Wolfcom Vision to your computer. Follow Direction below:
Download the Wolfcom Vision LE Admin Edition Software and save to Desktop.
Double click on the Set up icon:
Welcome window will pop up:
Click on "Next" Button
7 | Page
Select and accept the agreement, then click on "Next" button.
Enter the Password that is provide to you from your Account representative and click "Next" button
(If you do not have a pass word please contact your representative)
Click on "Next" button
8 | Page
Click on "Next" button
Select the additional task and click on "Next" button
Click on "Install" button
9 | Page
"Windows Security" window may pop up. Click on "Install this driver software anyway"
Click on "Install" button
The "Wolfcom Vision Set Up Manager Software" window will pop up.
Plug the included USB cable to your computer.
10 | Page
Plug the other end of the USB to your Wolfcom vision.
Power "ON" the Wolfcom Vision by sliding DOWN the OTR Switch.
A bubble will pop up at the bottom right of your screen. Allow your Windows operating system to install the drivers.
You will see the Settings populate in the data log on the set up manager window.
Your Wolfcom Vision is ready to connect to your computer or change any settings.
Please refer to Wolfcom Vision user manual to learn how to use and configure the Wolfcom Vision Set Up Manager.
Tabla de contenidos
