Witter F161U Manual de usuario

# N A M E ?

W0001F161U-FIT$010802220000

Fitting

Instructions

TOWBAR

FOR Ford B-Max

2012-

F161U

MATERIALS

A 1 Cross Bar

B 2 Side Arm

C 4 M12 x 35 x 1.75 pitch Bolts, Lock Washers, Flat Washers (OD 30mm) and Witter Cage Nuts

D 4 M12 x 35 x 1.75 pitch Bolts and Serrated Flanged Nuts

E 2 M8 x 1.25 pitch Spigot Nuts and M10 Flat Washers

ZE 1 Retractable Electrical Plate

ZN 1 Neck Kit (3008 Series)

Note: This tow bar must be used with either a Witter Neck Kit (Series 3008) or Class A50-1 or A50-X tow ball, which dimensionally

conforms to A50-1 with a ‘D’ and 'S' value greater than or equal to that of the tow bar.

FITTING

1. Remove Bumper

2. Remove Steel Bumper Beam

3. Pre-assemble Witter Cage Nuts (C) to Side Arms (B) using separate Fitting Instructions. (Note the side to assemble to

as shown below)

4. Assemble Side Arms (B) into each Chassis rail and secure using fasteners (C)

5. Assemble Cross Bar (A) to the vehicle rear panel over the existing Steel Bumper Beam studs and so that the Side Arms

(B) protrude through the rectangular holes in the Cross Bar end plates.

6. Loosely secure to the vehicle using fasteners (E). (Note M10 washers fit over the spigot on M8 Nuts)

7. Loosely secure the protruding Side Arms (B) to the Cross Bar (A) using fasteners (D)

8. Assemble the chosen Neck Kit (ZN) and Retractable Electrical Kit (ZE) to Cross Bar (A) using separate instructions.

9. Fully tighten all fasteners

10. Refit bumper.

Recommended torque settings:

Grade 8.8 bolts: M8 - 24Nm, M10 - 52 Nm, M12 - 80 Nm, M14 - 130 Nm, M16 - 200 Nm

Grade 10.9: M12 –120Nm, M10 –70Nm M8- 35Nm

Notice de

Montage

ATTELAGE

Pour Ford B-Max

2012-

F161U

MATERIELS

A 1 Cross Bar Traverse principale

B 2 Side Arm Bras lateraux

C 4 M12 x 35 x 1.75 pitch Bolts, Lock Washers, Flat Washers (OD 30mm) and Witter Cage Nuts

D 4 M12 x 35 x 1.75 pitch Bolts and Serrated Flanged Nuts

E 2 M8 x 1.25 pitch Spigot Nuts and M10 Flat Washers

ZE 1 Retractable Electrical Plate

ZN 1 Neck Kit (3008 Series)

Note: This tow bar must be used with either a Witter Neck Kit (Series 3008) or Class A50-1 or A50-X tow ball, which dimensionally

conforms to A50-1 with a ‘D’ and 'S' value greater than or equal to that of the tow bar.

FITTING

11. Remove Bumper

12. Remove Steel Bumper Beam

13. Pre-assemble Witter Cage Nuts (C) to Side Arms (B) using separate Fitting Instructions. (Note the side to assemble to

as shown below)

14. Assemble Side Arms (B) into each Chassis rail and secure using fasteners (C)

15. Assemble Cross Bar (A) to the vehicle rear panel over the existing Steel Bumper Beam studs and so that the Side Arms

(B) protrude through the rectangular holes in the Cross Bar end plates.

16. Loosely secure to the vehicle using fasteners (E). (Note M10 washers fit over the spigot on M8 Nuts)

17. Loosely secure the protruding Side Arms (B) to the Cross Bar (A) using fasteners (D)

18. Assemble the chosen Neck Kit (ZN) and Retractable Electrical Kit (ZE) to Cross Bar (A) using separate instructions.

19. Fully tighten all fasteners

20. Cut bumper using the diagram below as a guide and refit to vehicle.

Recommended torque settings:

Grade 8.8 bolts: M8 - 24Nm, M10 - 52 Nm, M12 - 80 Nm, M14 - 130 Nm, M16 - 200 Nm

Grade 10.9: M12 –120Nm, M10 –70Nm M8- 35Nm

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Witter

Witter

Witter F129AU Manual de usuario

Witter

Witter R41AQ Manual de usuario

Witter

Witter VW93 Manual de usuario

Witter

Witter CL114BU Manual de usuario

Witter

Witter VW82U Guía de instalación

Witter

Witter RN89 Guía de instalación

Witter

Witter F125U Manual de usuario

Witter

Witter SK29U Manual de usuario

Witter

Witter F81A Manual de usuario

Witter

Witter KA26U-FIT Manual de usuario

Witter

Witter DT143U Manual de usuario

Witter

Witter SK27U Manual de usuario

Witter

Witter F105A Manual de usuario

Witter

Witter F144 Manual de usuario

Witter

Witter DT144AU Manual de usuario

Witter

Witter ZX702 Manual de usuario

Witter

Witter F174 Manual de usuario

Witter

Witter HY29B Manual de usuario

Witter

Witter MR49U Manual de usuario

Witter

Witter F166U Manual de usuario

Witter

Witter F159 Guía de instalación

Witter

Witter MZ60U Manual de usuario

Witter

Witter KA47U Manual de usuario

Witter

Witter SU41U Guía de instalación

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario