Wistron NeWeb LV55 Manual de usuario
5G Internet Gateway
Outdoor Mounting Kit
Installation Guide (LV55IHP)
Version 1
i
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
ii
RF Exposure Statement
To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter
must be installed to provide a separation distance of at least 20cm from all persons (indoor), at least
48cm from all persons (outdoor), and must not be co-located or operating in conjunction with any
other antenna or transmitter.
Safety Warnings
Adapter
Do not use any other power adapter except the one that accompanies this unit or a power adapter
identified in the list below.
Use of another adapter could result in damage to the unit.
The following power adapter is qualified for use with this Verizon 5G Internet Gateway:
This unit must be powered by Delta Electronics, model ADH-90AR BCA or equivalent UL listed power
adapter rated @ output 56Vdc, Maximum 1610mA.
Caution
Ensure to connect the power cord of the power adapter to a socket outlet with an earthing connection.
iii
Table of Contents
Chapter 1 Introduction ..................................................................................................................................... 1
1.1 Unboxing Information........................................................................................................................... 1
1.2 Key Features ......................................................................................................................................... 1
1.3 Bottom Panel (without Enclosure) ..................................................................................................... 2
1.4 Bottom Panel (with Enclosure) ........................................................................................................... 3
1.5 Waterproof Enclosure .......................................................................................................................... 3
1.6 LED Notification Guide ........................................................................................................................ 4
Chapter 2 Installing the 5G Internet Gateway (Outdoor) ......................................................................... 5
2.1 Ground Installation ............................................................................................................................... 5
2.2 Wall Installation .................................................................................................................................. 11
Chapter 3 Connecting the 5G Internet Gateway ...................................................................................... 16
3.1 Setting up the 5G Internet Gateway. ............................................................................................... 16
3.2 Connection Scenario for the 5G Internet Gateway ....................................................................... 16
Chapter 4 Product Specifications................................................................................................................ 17
1
Chapter 1
Introduction
Verizon’s 5G Internet Gateway provides Verizon’s customers with a better solution for 5G home
service. The innovative design of the 5G Internet Gateway allows customers to connect their favorite
devices to Verizon’s 5G/LTE Network.
1.1 Unboxing Information
Inside the product package for the 5G Internet Gateway outdoor mounting kit, you should find the
following items:
• Outdoor housing for 5G Internet Gateway × 1
• Outdoor mounting bracket for 5G Internet Gateway × 1
• PoE power injector (PSE) × 1
• AC power cord × 1
• Surge protection device (SPU) × 1
• Screw bag × 2
• Cable gland × 1
1.2 Key Features
• Innovative and robust LTE/5G IHP/OHP CPE design provides significantly improved signal coverage
and quality over the previous generation resulting in greater customer satisfaction and increased unit
sales.
• Supports full range of 4G bands B2/B5/B13/B66/B48 (CAT 16), 5G NR FR2, and 5G NR FR1 to
ensure maximum coverage.
• Supports Wi-Fi 6 5GHz 4x4, 2.4GHz 2x2 coverage.
2
1.3 Bottom Panel (without Enclosure)
Part Description
RJ45-Outdoor Connect the Gateway to the surge protection unit (SPU) via
an Ethernet cable.
LED-Outdoor The LED will light up in different ways to indicate the
connectivity status of the 5G Internet Gateway.
LED-Outdoor
RJ45-Outdoor
3
1.4 Bottom Panel (with Enclosure)
1.5 Waterproof Enclosure
4
1.6 LED Notification Guide
Status Bottom LED
Device is powering up
Soft fade in-out blue
Bluetooth® pairing mode
(INSTALLATION MODE)
Pairing starts automatically once the device is
powered on.
Bluetooth® is paired
LED stops blinking blue
Activation complete
(INSTALLATION MODE)
The device has successfully activated and
established an LTE connection, and will start
searching for a 5G signal.
No 5G signal
(INSTALLATION MODE)
The Gateway did not immediately detect a 5G
signal after activation.
Poor 5G signal
(INSTALLATION MODE)
A 5G signal is detected after activation, but
signal strength is inadequate.
Acceptable 5G signal
(INSTALLATION MODE)
The detected 5G signal is good enough for
installation to continue.
Firmware update/factory reset in progress
The device is in the process of
updating/resetting software.
Error (Fault)
A hardware/software issue has occurred
Possible issues:
• CPE is broken
• Firmware is faulty
• Internet connection has been lost
Device is operating normally
(REGULAR USAGE MODE)
Device setup is complete and an Internet
connection has been established. The LED is
solid blue.
5
Chapter 2
Installing the 5G Internet Gateway
This section describes how to install the 5G Internet Gateway in an outdoor configuration, which is
adopted when the indoor configuration is unable to detect a usable 5G signal. Outdoor installations
must be carried out by professional, trained technicians.
2.1 Ground Installation
Step 1:
Pry off the I/O cap covering the bottom of the Gateway’s mounting collar.
Step 2:
Unscrew the four M2 screws securing the mounting collar to the Gateway.
6
Step 3:
Grab the front end of the collar and pull it off the Gateway.
Step 4:
Use a screwdriver to press down on the two snap-fits pictured below to allow the front cover to be
removed from the Gateway.
Tabla de contenidos
Manuales populares de Puerta de otras marcas
LST
LST M500RFE-AS Manual de usuario
Kinnex
Kinnex Media Gateway Manual de usuario
2N Telekomunikace
2N Telekomunikace 2N StarGate Manual de usuario
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario
Telsey
Telsey CPVA 500 - SIP Manual de usuario
