Winix ZERO Manual de usuario

Model

ZERO (AZBU330-HWE)

User Manual

WINIX AIR PURIFIER

Use & Care

Guide

• Please readand followall safetyrulesandinstructions

in this manual beforeoperating.

• The product warranty is printed on the back of this

guide, so please keep it in a safe place for future use.

English

ZERO 2

CONTENTS

4-STAGE AIR PURIFICATION ······································································· 3

CONTROLS································································································· 4

WHERE TO USE ·························································································· 5

INSTALLING FILTERS ····························································································6

SAFETY AND CAUTIONS ············································································· 8

INITIAL OPERATION ··················································································· 9

AUTO & SLEEP·························································································· 10

MANUAL & TIMER ··················································································· 11

PLASMAWAVE® & AIR QUALITY INDICATOR ················································ 12

FILTER CARE····························································································· 13

PARTICLE SENSOR CARE··········································································· 17

CLEANING CARE······················································································· 18

FREQUENTLY ASKED QUESTIONS ····························································· 19

UNIT SPECIFICATIONS·············································································· 21

PRODUCT WARRANTY ············································································· 22

French ································································································24

Spanish·······························································································47

German ······························································································70

Italian·································································································93

▶ This product is suitable for 220 - 240 V only.

English

ZERO 3

STAGE AIR PURIFICATION

Particle

sensor ➍PlasmaWave

Light sensor

Control Panel

Display Panel

➌True HEPA filter

➋Carbon Filters

➊

Pre-filter

Power cord with plug

(This product is suitable

for 220V ~ 240V only.)

Front panel

User Manual

WINIX AIR PURIFIER

Model AZBU330-HWE

•

Pleaseread and

follow all safe ty rul e s and

Use & Care inst ru ct io ns i n t his man u al be f or e

operating.

•

The

oduc

warra

the

back

thi s gui de, so

pleasekeep itin a safe

place for future us e.

Unit

Pre-filter/

(8) Carbon Filters/

(2) True HEPA Filter

Power cord

for EU/UK

User Manual

English

ZERO 4

CONTROLS

Air

Outlet

Vent

PlasmaWave Indicator

Indicates whether

PlasmaWave is enabled or

disabled.

Mode Button

Timer Indicator

If timer has been set, the

LED light indicates the set

time of operation.

Reset Button

After replacing a filter,

press the RESET button

for at least 5 seconds.

Press to cycle through

and set the desired

mode of operation

(Auto, Sleep).

Fan Speed

Indicator

Indicates the

current fan speed.

Air Quality

Indicator

Color-codedLED

indicates one of

three levels ofair

PlasmaWave Button

Enables or disables

PlasmaWave .

Power Button

Turns the unit on

or off.

Timer Button

Press to cycle

through and set

desired length of

operation (1hr,

4hr, 8hr,[NO

TIMER])

Light Sensor

Detects the

amount of

ambient light

within the

environment,

to adjust the

brightness

of the LED

indicators.

quality.

Fan SpeedButton

Enables Manual operation of the

unit. Press to cycle through and

set the desired fan speed (Low,

Medium, High, Turbo).

Change Filter Indicator

LED light indicates when it is time to

change the filter.

English

ZERO 5

Do not place in excessively humid areas

where unit may become wet.

Do not place below any electrical outlet.

Do not have unit facing into wind or draft.

Do not place near any flammable

materials (aerosols, fuel, gases etc.).

Do not place in an area with excessive

amounts of noxiousgases.

Do not install in any sort of motor or

transport

vehicle(trucks,boats,

ships,

etc.).

Do not place around heatingelements.

Do not use around mist or fumes from

industrial

oil or around large quantities

metallic dust.

WHERE TO USE

Allow 30 - 45 cm. of space between TVs, radios, and other electronic products

electromagneticinterferencefromcertainelectronicsmaycauseproductmalfunction.

Place indoors away from direct sun light

direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

flimsy or slanted surfaces may result in abnormal noise and vibrations.

※

This unit is not intended to be used to preserve documents or in art

conservation.

10cm

30~45 cm

Follow theseinstructions toreduce the risk of serious injury

or death and to reduce risk of damaging the unit.

WARNING

INSTALLING FILTERS

English

ZERO 6

• Refer to pages 13 - 15 for details on how to replace filters.

Note

This product comes with all required filters.The protectiveplastic wrapmust be

removed from the filter before use.

※

Operating the unit without removing the plastic wrap may result in product

failure.

※ Unplug and make sure the unit is turned off before installing filter.

① Remove the front panel by grasping its

upper edge and gently pulling forward.

②Remove thefiltersfromthe unit, they are

protected inside a plasticwrap

③ Remove filters from protective plastic wrap.

• Operating the unit without removing

filters from plastic wrap may cause

abnormalnoise, deformation,or fireasa

result of overheating.

Latch

INSTALLING FILTERS

English

ZERO 7

④Install the filters until they fit securely in

place.

Filters must be installed in this order:

3 TrueHEPA Filter(rear)

2 Carbon filter(middle)

1 Pre-filter (front)

• To install the Pre-filter, insert bottom tabs

into the slots on either side of the lower part

of the unit, then rotate upward to insert the

upper tabs into the slots at the top part of

the unit until sides audibly click into place.

⑤ Replace the front panel by first inserting

the latch at the bottom edge into the base

of the unit, then rotate the panel upward

toward the top of the unit until the magnets

pull the lid closed.

⑥ When to service and replace filter:

Filter Indicator Light

When to

service When to replace

1 Pre-filter none

Clean once every

14 days Permanent

2 Carbon filter none

Can NOT be

WASHED

Replace every

3 months

3 True HEPA filter

Lasts up to

6~12 months

※ Intervals between filter replacement may vary depending on environment.

※

For optimal use, Pre-filter can be cleaned once every 14 days which can

extend the life of other filters.

To purchase replacement

Winix filters:

contact your local dealer

True

HEPA

filter

Carbon

filter

Pre-filter

Latch

this unit

compatible

with this

ﬁlter

item: 115115

FILTER

SAFETY AND CAUTIONS

English

ZERO 8

Follow these instructions to reduce the risk of serious

injury or death and to reduce risk of damaging the unit.

WARNING

※

If the supply cord is damaged, it must be replaced by a special cord or assembly

available from the manufacturer or its service agent.

※

This appliance is not intended for use by a person (including children) with reduced

physicalsensory or mental capabilities, or lackof experienceand knowledge,unless

they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety.

※ Children should be supervised to ensure that they do not play with the appliance.

Cord can become damaged by forcefully

bending, pulling, twisting, bundling,

pinching or placing heavy objects on it

Unplug unit when not in operation for

extended periods oftime

Do not touch the plug with wet hands

Do not plug additional appliances into

the same outlet or power supply

Do not unplug or move the unit while in

operation

If the unitbecomes submerged in water,

unplug it and contact customer service

Do not tie or knot power cord when unit

is in operation

Do not pull on the power cord when

unplugging the unit

Before operating this equipment, carefully read and follow these safety cautions

Ensure filters are inserted before running unit

running unit without filters can shorten the units life and cause electric shock or injury.

Be sure foreign objects are NOT inserted into the vents on the unit

objects can include pins, rods, and coins.

Do not touch any part of the interior of the unit with wet hands

the high voltage may cause electric shock.

Ensure unit intake and outlet vents do not become blocked

blockage maylead to increased internal termperatures causingproduct failure and

derformation.

Do not use the unit as a step stool or place heavy objects on it

personal injury may occur or product failure and deformation.

INITIAL OPERATION

English

ZERO 9

• InAuto mode, as the indoor air quality improves, the fan

speed will automatically be reduced to Low.

•

When the unit is running, you may hear a chirping or buzzing

sound. The sound is from large particles passing through

PlasmaWave®, it is normal and does not signify product

failure. To disable PlasmaWave

, see page 12.

Note

① Insert the power cord into an electrical

outlet.

② Press the ‘Power’ button.

③Bydefault, whentheunitfirstpowerson,the

mode will be set to Auto with PlasmaWave®

enabled.

• When in Auto mode, the fan speed will

be automatically adjusted according to

the environments airquality.

• PlasmaWave® works to removeharmful

airborne contaminants.

• During the first 30 seconds of power up, the Air Quality

Indicator will cycle through Blue,Yellow and Red colors.

The Particle Sensors take approximately 30 seconds to

gauge the air quality in the environment, after which

normal

operation will begin.

Note

AUTO & SLEEP

English

ZERO 10

• When in Auto mode the fan speed is automatically adjusted

according to the indoor air quality. As the indoor air

quality

improves, the fan speed will automatically be reduced.

If the indoor air quality decreases, the fan speed will

automatically increase.

Note

• When Sleep mode is selected, the fan speed is automatically

set to Low. The fan speed can be manually changed by

pressing the Fan Speed button, changing the unit into

manual mode.

•

WhenSleep Mode is activated, the Air Quality IndicatorLED

light is disabled.

Note

Auto Mode

Enables auto operation based on the unit's air quality Particle Sensor.

① Press the Mode button to select Auto mode.

• The LED ‘Auto’ light will indicate when

Auto mode is activated, and operation

will begin.

Sleep Mode

① Press the Mode button to select Sleep mode.

• The LED "Sleep" light will indicate when

Sleep mode is activated, and operation

will begin.

Otros manuales para ZERO

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Purificador de aire de Winix

Winix

Winix PlasmaWave WACU300 Manual de usuario

Winix

Winix ZERO 5 Manual de usuario

Winix

Winix Zero AUS-1050AZBU Manual de usuario

Winix

Winix FreshHome PlasmaWave WACP150 Manual de usuario

Winix

Winix FreshHome PlasmaWave WACP150 Manual de usuario

Winix

Winix HR950 Manual de usuario

Winix

Winix 5300-2 Manual de usuario

Winix

Winix T1 Manual de usuario

Winix

Winix HR900 Manual de usuario

Winix

Winix AZSU350-JWB Manual de usuario

Winix

Winix 5500-2 Manual de usuario

Winix

Winix HR1000 Manual de usuario

Winix

Winix T1 Manual de usuario

Winix

Winix NK300 Manual de usuario

Winix

Winix AAPU500-JLE Manual de usuario

Winix

Winix Zero AUS-1050AZBU Manual de usuario

Winix

Winix ZERO Pro Manual de usuario

Winix

Winix ZERO 360 Manual de usuario

Winix

Winix NK305 Manual de usuario

Winix

Winix FreshHome PlasmaWave WACP150 Manual de usuario

Winix

Winix AM90 Manual de usuario

Winix

Winix 5500-2 Manual de usuario

Winix

Winix D480 Manual de usuario

Winix

Winix C535 Manual de usuario

Manuales populares de Purificador de aire de otras marcas

IKEA

IKEA UPPÅTVIND Manual de usuario

Nash

Nash AP-1 PureSmart Manual de usuario

LG PH-U450 Series Manual de usuario

DeLonghi

DeLonghi DDSX 220WFA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manual de usuario

Sharp

Sharp FU-40SE Manual de usuario

Philips

Philips AC2721 Manual de usuario

Hitachi

Hitachi EP-A3000 Manual de usuario

TruSens

TruSens Z-2000 Manual de usuario

Motorola

Motorola MBP87SN Manual de usuario

Beko

Beko ATP 7100I Manual de usuario

Carrier

Carrier INFINITY 1620 Manual de usuario

AtmosAir

AtmosAir P2002 Manual de usuario

Friedrich

Friedrich C-90A Instrucciones de funcionamiento e instalación

Surgically Clean Air

Surgically Clean Air JADE2.0 Manual de usuario

Base aire

Base aire 555 Pro Manual de usuario

Champion

Champion CP25 Manual de usuario

vollara

vollara Air & Surface Pro+ Manual de usuario