Williams Sound DL102 Hoja de especificaciones

PDF provided by Conference Room AV

Williams Sound DL 102 SY2 Counter Loop Amplifier for T-Coil Enabled Devices

DL102

Counter Loop Amplifier

QUICK START GUIDE

Thank you for purchasing a DL102 Counter Loop Ampliﬁer. For additional information on this

product, including speciﬁcations and user manuals, please visit williamsav.com.

System Includes

DL102

DL102 ampliﬁer

Power supply

AC line cord

Loop notice stickers

Set of adhesive cable clips

MIC 103 - Microphone

DL102 SY1

DL102 ampliﬁer

Power supply

AC line cord

Loop notice stickers

Set of adhesive cable clips

MIC 103 - Microphone

PLW 037 (120ft Spool of wire)

PLM 001 - Loop Pad

Safety Information

Servicing or attempting to service this device will void the warranty

Refer servicing to qualiﬁed personnel. Servicing is required when the system has been damaged

in any way: if liquid has been spilled or objects have fallen into the unit, if the unit has been

exposed to moisture, if the unit does not operate normally, or if the unit has been dropped.

Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

that produces heat.

Use only attachments/accessories speciﬁed by the manufacturer.

Unplug the ampliﬁer during lightning storms or when unused for long periods of time.

Be advised that dierent operating voltages require the use of dierent types of line cord and

attachment plugs. Check the voltage in your area and use the correct type.

Use only the power supply provided by Williams AV. Other power supplies may have similar

speciﬁcations, but may not be equivalent in emissions ratings, in-rush current, etc. Use of an

unapproved power supply may leave the device partially or completely inoperable, and will void

the warranty.

CAUTION: The line cord must be disconnected BEFORE any audio connections are made

to the loop ampliﬁer. To completely disconnect the system from the line cord, please remove the

line cord plug from the wall socket.

CAUTION: The surface of the ampliﬁer may become hot when operating this system con-

tinuously. Do not touch the surface during use or block the ventilation holes.

DL102

Counter Loop Amplifier

QUICK START GUIDE

Quick Setup

1. Check the contents of package.

2. Place the ampliﬁer near the sound source.

3. Connect audio leads and/or microphone between the sound source and the loop ampliﬁer.

4. Place the loop cable or pad in position and connect both ends of wire to the loop cable

connectors on the rear of the loop ampliﬁer.

5. Connect the line cord to the power supply unit.

6. Plug the power supply unit lead into the ampliﬁer.

7. Switch on audio equipment and the loop ampliﬁer.

8. If you have a ﬁeld strength meter, adjust the loop ampliﬁer to a ﬁeld strength of 400mA/m in

the looped area to meet the IEC 60118-4 speciﬁcation.

9. Switch your hearing device to be in T-coil mode (follow instructions for your speciﬁc hearing

device).

For instructions on how to connect a microphone, setting up the loop wire, and more, please view

the full user manual online at williamsav.com.

info@williamsav.com / www.williamsav.com

800-843-3544 / INTL: +1-952-943-2252

Otros manuales para DL102

Tabla de contenidos

Otros manuales de Amplificador de Williams Sound

Williams Sound

Williams Sound CFM 801 Guía de solución de problemas

Williams Sound

Williams Sound PLA-240 Manual de usuario

Williams Sound

Williams Sound DL102 Manual de usuario

Williams Sound

Williams Sound Pocketalker Pro Guía

Williams Sound

Williams Sound Pocketalker Pro Guía

Williams Sound

Williams Sound PKT 2.0 Manual de usuario

Williams Sound

Williams Sound PLA-215 Guía

Williams Sound

Williams Sound Pocketalker PKT E1 Manual de usuario

Williams Sound

Williams Sound Digi-Loop DL107 NET Manual de usuario

Williams Sound

Williams Sound Pocketalker Ultra PKT D1 Manual de usuario

Williams Sound

Williams Sound pocketalker 2.0 Manual de usuario

Williams Sound

Williams Sound POCKETALKER Ultra D1 Guía

Williams Sound

Williams Sound PLA-215 Manual de usuario

Williams Sound

Williams Sound Pocketalker Ultra PKT D1 Manual de usuario

Williams Sound

Williams Sound POCKETALKER ULTRA Guía

Williams Sound

Williams Sound PLA DL210NET-D Manual de usuario

Williams Sound

Williams Sound Pocketalker Pro Guía

Williams Sound

Williams Sound Pocketalker Pro Guía

Williams Sound

Williams Sound Pocketalker Pro Guía

Williams Sound

Williams Sound PLA DL210NET Manual de usuario

Williams Sound

Williams Sound Pocketalker Pro Pocketalker Pro Personal... Manual de usuario

Williams Sound

Williams Sound Pocketalker PRO PKT C1 Manual de usuario

Williams Sound

Williams Sound Pocketalker 2.0 PKT E1 Manual de usuario

Williams Sound

Williams Sound SoundFocus CFM 300 Manual de instrucciones

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario