WIKA S-11 Manual de usuario

Operating instructions

Betriebsanleitung

Mode d'emploi

Manual de instrucciones

Druckmessumformer mit frontbündiger Membrane Typ S-11

Flush diaphragm pressure transmitter model S-11

Transmisor de presión con membrana aflorante modelo

S-11

Transmetteur de pression à membrane affleurante type S-11

2WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d‘emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta posterior!

Operating instructions model S-11 Page 3 - 24

Betriebsanleitung Typ S-11 Seite 25 - 46

Mode d'emploi type S-11 Page 47 - 68

Manual de instrucciones modelo S-11 Página 69 - 91

3WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

1. General information 4

2. Safety 6

3. Specications 8

4. Design and function 14

5. Transport, packaging and storage 14

6. Commissioning, operation 15

7. Adjustment of zero point and span 20

8. Maintenance and cleaning 21

9. Faults 21

10. Dismounting, return and disposal 22

Contents

Declarations of conformity can be found online at www.wika.com.

4WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

1. General information

■

The pressure transmitter described in the operating instructions has been designed and manufactured using state-

of-the-art technology. All components are subject to stringent quality and environmental criteria during production.

Our management systems are certied to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instrument.Working safely requires that

all safety instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and general safety regulations for the instrument's range

of use.

■

The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and

readily accessible to skilled personnel at any time.

■

Skilled personnel must have carefully read and understood the operating instructions, prior to beginning any work.

■

The manufacturer's liability is void in the case of any damage caused by using the product contrary to its intended

use, non-compliance with these operating instructions, assignment of insuciently qualied skilled personnel or

unauthorised modications to the instrument.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PE 81.02

- Application consultant: Tel.: +49 9372 132-0

Fax: +49 9372 132-406

E-mail: [email protected]

1. General information

5WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

1. General information

Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries or damage to equipment or

the environment, if not avoided.

Information

… points out useful tips, recommendations and information for ecient and trouble-free operation.

CAUTION!

... indicates a potentially dangerous situation that can result in burns, caused by hot surfaces or liquids, if

not avoided.

Abbreviations

2-wire The two connection lines are used for the voltage supply.

The measurement signal also provides the supply current.

3-wire Two connection lines are used for the power supply.

One connection line is used for the measurement signal.

U+Positive power supply terminal

U-Reference potential

S+Analogue output

6WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

2. Safety

WARNING!

Before installation, commissioning and operation, ensure that the appropriate pressure transmitter has

been selected in terms of measuring range, design and specic measuring conditions.

Non-observance can result in serious injury and/or damage to equipment.

WARNING!

■

Open the connections only after the system has been depressurised.

■

Observe the working conditions in accordance with chapter 3 “Specications”.

■

Always operate the pressure transmitter within the overpressure limit.

Further important safety instructions can be found in the individual chapters of these operating

instructions.

2.1 Intended use

The pressure transmitter is used to convert pressure into an electrical signal indoors and outdoors.

The instrument has been designed and built solely for the intended use described here, and may only be used

accordingly. The technical specications contained in these operating instructions must be observed. Improper

handling or operation of the pressure transmitter outside of its technical specications requires the instrument to be

taken out of service immediately and inspected by an authorised WIKA service engineer.

The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.

2.2 Personnel qualication

WARNING!

Risk of injury should qualication be insucient!

Improper handling can result in considerable injury and damage to equipment.

The activities described in these operating instructions may only be carried out by skilled personnel who

have the qualications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training, knowledge of measurement

and control technology and on their experience and knowledge of country-specic regulations, current standards and

directives, are capable of carrying out the work described and independently recognising potential hazards.

Special operating conditions require further appropriate knowledge, e.g. of aggressive media.

7WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

2. Safety

2.3 Special hazards

WARNING!

For hazardous media such as oxygen, acetylene, ammable or toxic gases or liquids, and refrigeration

plants, compressors, etc., in addition to all standard regulations, the appropriate existing codes or

regulations must also be followed.

WARNING!

Residual media in the dismounted pressure transmitter can result in a risk to persons, the environment

and equipment.

Take sucient precautionary measures.

Do not use this instrument in safety or emergency stop devices. Incorrect use of the instrument can result

in injury.

Should a failure occur, aggressive media with extremely high temperature and under high pressure or

vacuum may be present at the instrument.

2.4 Labelling / safety marks

Product label

Output signal

Pin assignment

Power supply

S# Serial no.

P# Product no.

Measuring range

2D code

Approvals

If the serial number and the 2D code become illegible due to mechanical damage or overpainting, traceability will no

longer be possible.

8WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

3. Specifications

3.1 Measuring ranges

Gauge pressure

bar Measuring range 0 ... 0.1 0 ... 0.16 0 ... 0.25 0 ... 0.4 0 ... 0.6 0 ... 1 0 ... 1.6

Overload safety 1 1.5 2 2 4 5 10

Measuring range 0 ... 2.5 0 ... 4 0 ... 6 0 ... 10 0 ... 16 0 ... 25 0 ... 40

Overload safety 10 17 35 35 80 50 80

Measuring range 0 ... 60 0 ... 100 0 ... 160 0 ... 250 0 ... 400 0 ... 600

Overload safety 120 200 320 500 800 1,200

psi Measuring range 0 ... 15 0 ... 20 0 ... 30 0 ... 50 0 ... 60 0 ... 100 0 ... 150

Overload safety 145 145 145 240 240 500 500

Measuring range 0 ... 160 0 ... 200 0 ... 250 0 ... 300 0 ... 400 0 ... 500 0 ... 600

Overload safety 1,160 1,160 1,160 1,160 1,160 1,160 1,160

Measuring range 0 ... 750 0 ... 1,000 0 ... 1,500 0 ... 2,000 0 ... 3,000 0 ... 5,000 0 ... 6,000

Overload safety 1,740 1,740 2,900 4,600 7,200 11,600 11,600

Absolute pressure

bar Measuring range 0 ... 0.25 0 ... 0.4 0 ... 0.6 0 ... 1 0 ... 1.6 0 ... 2.5 0 ... 4

Overload safety 2 2 4 5 10 10 17

Measuring range 0 ... 6 0 ... 10 0 ... 16

Overload safety 35 35 80

psi Measuring range 0 ... 15 0 ... 25 0 ... 50 0 ... 100 0 ... 250

Overload safety 72.5 145 240 500 1,160

3. Specications

9WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

3. Specications

Vacuum and +/- measuring range

bar Measuring range -0.6 ... 0 -0.4 ... 0 -0.25 ... 0 -0.16 ... 0 -0.1 ... 0

Overload safety 4 2 2 1.5 1

Measuring range -1 ... 0 -1 ... +0.6 -1 ... +1.5 -1 ... +3 -1 ... +5

Overload safety 5 10 10 17 35

Measuring range -1 ... +9 -1 ... +15 -1 ... +24

Overload safety 35 80 50

psi Measuring range -30 inHg ... 0 -30 inHg ... +30 -30 inHg ... +60 -30 inHg ... +100 -30 inHg ... +160

Overload safety 72.5 240 240 500 1,160

Measuring range -30 inHg ... +200 -30 inHg ... +300

Overload safety 1,160 1,160

Vacuum tightness: Yes

3.2 Output signals

Signal type Signal

Current (2-wire) 4 ... 20 mA

Current (3-wire) 0 ... 20 mA

Voltage (3-wire) DC 0 ... 10 V

DC 0 ... 5 V

Load in Ω

Depending on the signal type the following loads apply:

Current (2-wire): ≤ (power supply - 10 V) / 0.02 A

Current (3-wire): ≤ (power supply - 3 V) / 0.02 A

Voltage (3-wire): > max. output signal / 1 mA

10 WIKA operating instructions pressure transmitter, model S-11

14043046.02 08/2019 EN/DE/FR/ES

3. Specications

3.3 Power supply

4 ... 20 mA (2-wire): DC 10 ...30 V

0 ... 20 mA (3-wire): DC 10 ...30 V

DC 0 ... 10 V: DC 14 ... 30 V

DC 0 ... 5 V: DC 10 ...30 V

3.4 Reference conditions (per IEC 61298-1)

Temperature: 15 ... 25 °C (59 ... 77 °F)

Atmospheric pressure: 860 ... 1,060 mbar (12.5 ... 15.4 psi)

Humidity: 45 ... 75 % r. h.

Power supply: DC 24 V

Mounting position: Calibrated in vertical mounting position with process connection facing downwards.

3.5 Accuracy specications

Accuracy at reference conditions

Standard ≤ ±0.5 % of span

Option ≤ ±0.25 % of span 1)

1) Only for measuring ranges ≥ 0.25 bar

Including non-linearity, hysteresis, zero oset and end value deviation (corresponds to measured error per

IEC 61298-2). Calibrated in vertical mounting position with process connection facing downwards.

Non-linearity (per IEC 61298-2): ≤ ±0.2 % of span BFSL

Non-repeatability: ≤ 0.1 % of span

Long-term stabilty at reference conditions: ≤ ±0.2 % of span/year

Temperature error in rated temperature range

Rated temperature range: 0 ... 80 °C (32 ... 176 °F)

Mean temperature coecient of zero point:

Measuring range > 0.25 bar: ≤ ±0.2 % of span/10 K

Measuring range ≤ 0.25 bar: < ±0.4 % of span/10 K

Mean temperature coecient of span: ≤ ±0.2 % of span/10 K

Otros manuales para S-11

Tabla de contenidos

Idiomas:

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario