Wiha DHT0002 Manual de usuario

INSTRUCTION MANUAL

Item No.: DHT0002 / D810401

4V CORDLESS SCREWDRIVER

4V AKKU-SCHRAUBENDREHER

EN ............. 2

DE ............. 22

BEDIENUNGSANLEITUNG

DEEN

Overview of Contents

1 Generalsafetywarnings................................................................................................ 3

2 Symbolsandexplanationofterms............................................................................... 9

3 Contents......................................................................................................................... 11

4 Knowyourtool............................................................................................................... 11

5 Technicaldata................................................................................................................ 13

6 Use.................................................................................................................................. 14

7 Storage,cleaningandmaintenance............................................................................. 19

8 Troubleshooting............................................................................................................ 20

9 Wastedisposal............................................................................................................... 20

10 Warranty......................................................................................................................... 21

4VCordlessScrewdriver-DHT0002-EN-01

General safety warnings

1 General safety warnings

Toreducetheriskofinjury,theusermustreadandunderstandthisinstructionmanual.

WARNING: Read all safety warnings, instructions, illustrations and speci󽘀cations

provided with this tool.Failuretofollowallinstructionslistedbelowmayresultinelectric

shock,󽘀reand/orseriousinjury.

Keep all warnings and instructions for future reference.

NOTE:Thechargermentionedinthesafetyinstructionsisnotincluded/partofthescope

ofsupply.

1.1 Work area safety

› Keep work area clean and well lit.Clutteredordarkareasinviteaccidents.

› Do not operate power tools in explosive atmospheres, such as in the presence of

󽘁ammable liquids, gases or dust.Powertoolscreatesparks,whichmayignitethedust

orfumes.

› Keep children and bystanders away while operating a power tool.

Distractionscancauseyoutolosecontrol.

08/01/21 Original instruction manual

General safety warnings

1.2 Electrical safety

› Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools.Unmodi󽘀edplugsand

matchingoutletswillreduceriskofelectricshock.

› Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ran-

ges and refrigerators.Thereisanincreasedriskofelectricshockifyourbodyisearthedor

grounded.

› Do not expose power tools to rain or wet conditions. Waterenteringapowertoolwill

increasetheriskofelectricshock.

› Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damagedorentan-

gledcordsincreasetheriskofelectricshock.

› When operating a power tool outdoors, use an extension cord suitable for outdoor

use. Useofacordsuitableforoutdoorusereducestheriskofelectricshock.

› If operating a power tool in a damp location is unavoidable, use a RESIDUAL CURRENT

DEVICE (RCD) protected supply.UseofanRCDreducestheriskofelectricshock.

1.3 Personal safety

› Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool if you are tired or under the in󽘁uence of drugs, alcohol

or medication. Amomentofinattentionwhileoperatingpowertoolsmayresultinserious

personalinjury.

› Use personal protective equipment. Always wear eye protection.Protectiveequip-

mentsuchasadustmask,non-skidsafetyshoes,hardhat,orhearingprotectionusedfor

appropriateconditionswillreducetheriskofinjury.

4VCordlessScrewdriver-DHT0002-EN-01

General safety warnings

› Prevent unintentional starting. Ensure the switch is in the o󽗿-position before con-

necting to a power source and/or BATTERY pack, picking up or carrying the tool.

Carryingpowertoolswithyour󽘀ngerontheswitchorenergisingpowertoolsthathave

theswitchoninvitesaccidents.

› Remove any adjusting key or wrench before turning the power tool on. Awrenchor

akeyleftattachedtoarotatingpartofthepowertoolmayresultinpersonalinjury.

› Do not overreach. Keep proper footing and balance at all times. Thisenablesbetter

controlofthepowertoolinunexpectedsituations.

› Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Looseclothes,jewelleryorlonghaircanbecaughtin

movingparts.

› If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used.Useofdustcollectioncanreducedust-

relatedhazards.

› Do not let familiarity gained from frequent use of tools allow you to become compla-

cent and ignore tool safety principles. Acarelessactioncancausesevereinjurywithina

fractionofasecond.

1.4 Power tool use and care

› Do not force the power tool. Use the correct power tool for your application.Thecor-

rectpowertoolwilldothejobbetterandmoresafelyattherateforwhichitwasdesigned.

› Do not use the power tool if the switch does not turn it on and o󽗿. Anypowertoolthat

cannotbecontrolledwiththeswitchisdangerousandmustberepaired.

08/01/21 Original instruction manual

General safety warnings

› Disconnect the plug from the power source and/or remove the BATTERY pack, if deta-

chable, from the power tool before making any adjustments, changing accessories,

or storing power tools.Suchpreventivesafetymeasuresreducetheriskofstartingthe

powertoolaccidentally.

› Store idle power tools out of the reach of children and do not allow per-

sons unfamiliar with the power tool or these instructions to operate the

power tool.Powertoolsaredangerousinthehandsofuntrainedusers.

› Maintain power tools and accessories. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may a󽗿ect the power tool's

operation. If damaged, have the power tool repaired before use.Manyaccidentsare

causedbypoorlymaintainedpowertools.

› Keep cutting tools sharp and clean.Properlymaintainedcuttingtoolswithsharpcut-

tingedgesarelesslikelytobindandareeasiertocontrol.

› Use the power tool, accessories and tool bits etc. in accordance with these instruc-

tions, taking into account the working conditions and the work to be performed. Use

ofthepowertoolforoperationsdi󽗿erentfromthoseintendedcouldresultinahazardous

situation.

› Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery

handlesandgraspingsurfacesdonotallowforsafehandlingandcontrolofthetoolin

unexpectedsituations.

4VCordlessScrewdriver-DHT0002-EN-01

General safety warnings

1.5 Battery tool use and care

› Recharge only with the charger speci󽘀ed by the manufacturer. Achargerthatissuitable

foronetypeofBATTERYpackmaycreateariskof󽘀rewhenusedwithanotherBATTERY

pack.

› Use power tools only with speci󽘀cally designated BATTERY packs.Useofanyother

BATTERYpacksmaycreateariskofinjuryand󽘀re.

› When the BATTERY pack is not in use, keep it away from other metal objects such

as paper clips, coins, keys, nails, screws or other small metal objects that can make

a connection from one terminal to another.ShortingtheBATTERYterminalstogether

maycauseburnsora󽘀re.

› Under abusive conditions, liquid may be ejected from the BATTERY; avoid contact.

If contact accidentally occurs, 󽘁ush with water. If liquid contacts eyes, additionally

seek medical help.LiquidejectedfromtheBATTERYmaycauseirritationorburns.

› Do not use a BATTERY pack or tool that is damaged or modi󽘀ed. Damagedormodi󽘀ed

batteriesmayexhibitunpredictablebehaviourresultingin󽘀re,EXPLOSIONorriskofinjury.

› Do not expose a BATTERY pack or tool to 󽘀re or excessive temperatures. Exposureto

󽘀reortemperaturesabove130°Cmaycauseexplosion.

› Follow all charging instructions and do not charge the BATTERY pack or tool outside

the temperature range speci󽘀ed in the instructions.Chargingimproperlyorattempe-

raturesoutsidethespeci󽘀edrangemaydamagetheBATTERYandincreasetheriskof󽘀re.

08/01/21 Original instruction manual

General safety warnings

1.6 Service

› Have your power tool serviced by a quali󽘀ed repair technician using only identical

replacement parts. Thiswillensurethatthesafetyofthepowertoolismaintained.

› Never service damaged BATTERY packs.ServiceofBATTERYpacksshouldonlybeper-

formedbythemanufacturerorauthorisedserviceproviders.

1.7 Speci󽘀c safety rules for cordless screwdriver

› Hold the power tool by insulated gripping surfaces when performing an operation where

the fastener may contact hidden wiring.Fastenerscontactinga“live”wiremaymakeexpo-

sedmetalpartsofthepowertool“live”andcouldgivetheoperatoranelectricshock.

› Be sure to hold this tool 󽘀rmly. Whentighteningandlooseningscrews,theremaybea

briefstrongkickback.

› Secure the workpiece.Clampingdevicesoravisewillholdtheworkpieceinplacebetter

andmoresafelythanholdingitbyhand.

› Keep your hands away from the working part of the bits to avoid injury.Donotremo-

vedust,debrisorwastebyhandnearthebitsduringoperating.

› Be sure to turn o󽗿 the switch and wait for the tool to stop completely before putting

it down.

› Do not touch bits and screws immediately after use. Theymaybeveryhotandcould

burnskinwhentouchingthemafteruse.

› Do not expose this tool to rain or snow.

› Do not burn this tool or leave it in the 󽘀re; it will cause explosion.

› Before turning screws on walls, 󽘁oors, and ceilings, carefully check whether there

are wires, cables, natural gas pipes, or water pipes that may be damaged.

4VCordlessScrewdriver-DHT0002-EN-01

Symbols and explanation

Originalinstructionmanual

WARNING: ALWAYS useSAFETYEQUIPMENTsuchassafetyglasses,hearingprotection

andbreathingprotectionduringoperating.

1.8 Important safety rules for the charger

› Do not expose the charger to rain or wet conditions. Waterenteringwillincreasetherisk

ofelectricshock.

› Do not abuse the cord. Neverusethecordforcarrying,pullingorunpluggingthepower

tool.

› Keep the cord away from heat, oil, sharp edges or moving parts.Damagedorentangled

cordsincreasetheriskofelectricshock.

› Make sure children don't play with the charger.

› Check the charger, charging cord and plug before charging.Donotuseadamagedchar-

gerorchargingcord,whichmaycauseashortcircuitandelectricshock.

› Do not disassemble the charger. Takeittoaservicecenterwhenserviceorrepairisrequi-

red.Incorrectreassemblymayresultinariskofelectricshock,electrocutionor󽘀re.

› When not in use, remove the charger from the power supply to reduce the risk of elect-

ric shock.

› To prevent electric shock, do not touch the uninsulated part of the socket.

2 Symbols and explanation of terms

Someofthefollowingsymbolsmaybeusedonthistool.Pleasefamiliariseyourselfwiththem

andlearntheirmeaning.Properinterpretationofthesesymbolswillallowyoutooperatethe

toolbetterandmoresafely.

08/01/21 Original instruction manual

V volts ~ alternatingcurrent

A amperes directcurrent

Hz hertz Ah ampere-hours

Wwatts Li-ion lithium-ionbattery

n0no-loadspeed Ø diameter

/min revolutionsperminute safetyalertsymbol

Toreducetheriskofin-

jury,theusermustread

theinstructionmanual

(thismanual).

Intertek

IndicatesGSmarkconformance

andcompliancewithrelevantstan-

dards

Alwaysweareyepro-

tection. WARNING Readcarefully.Warningsmustbefol-

lowed–notdoingsocouldendanger

yourandothers'livesandhealth.

Donotthrowitin󽘀re. CAUTION Readcarefully–whenusingthe

tool,thisinformationcouldbe

importantwithregardtohealth,

safetyandregionalregulations.

Symbols and explanation

4VCordlessScrewdriver-DHT0002-EN-01

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Destornillador eléctrico de Wiha

Wiha

Wiha Mi x Manual de usuario

Wiha

Wiha speedE Industrial Manual de usuario

Wiha

Wiha Zai Hauce D810401 Manual de usuario

Manuales populares de Destornillador eléctrico de otras marcas

Makita

Makita DFT085F Manual de usuario

Parkside

Parkside 345138 2004 Manual de usuario

Makita

Makita DFL650F Manual de usuario

AEG

AEG BST 18BLX2-0 Manual de usuario

Ingersoll-Rand

Ingersoll-Rand D5000 Series Manual de usuario

BGS technic

BGS technic 956 Manual de usuario

Hilti

Hilti SD 6000 Manual de usuario

Parkside

Parkside PEPS 3 A1 Manual de usuario

Festool

Festool TI 15 Manual de usuario

Makita

Makita DWT190 Manual de usuario

Matatakitoyo Torque Tools

Matatakitoyo Torque Tools MTD Manual de usuario

Skil

Skil 2346 Instrucciones de montaje

DeWalt

DeWalt XR LI-ION DCD931 Manual de usuario

Festool

Festool DWC 18-2500 Manual de usuario

EINHELL

EINHELL TE-CD 12/1 Li Series Manual de usuario

Makita

Makita BFT043F Manual de usuario

Stanley

Stanley SCD2 Manual de usuario

Atlas Copco

Atlas Copco LUM12 SR Hoja de instrucciones