WiebeTech RTX100-SJ Manual de usuario
RTX100-SJ User’s Manual - 1 -
RTX100-SJ™
USER’S MANUAL
Revised October 19, 2007
Features
•TrayFree™ technology! RTX-100-SJ doesn’t force you to install your
hard drives into trays. Simply slide in a SATA drive and shut the
door.
•The specially-designed SATA drive interface is built to withstand
thousands of drive insertions.
•Fast eSATA connection, plus USB 2.0 for wide compatibility.
•Sturdy aluminum case provides excellent heat dissipation and
rugged durability.
•Fanless design for silent operation.
•Built-in lock to keep your drives secure.
Before Installation
1. Check the accessories with your RTX100-SJ. Please contact WiebeTech if any parts are missing
or damaged. The box should contain the following items:
Accessories Quantity
RTX100-SJ unit 1
eSATA cable 1
USB cable 1
AC adapter & power cord 1
Tool for lock 1
Manual and Warranty Information (on CD)
USB cable
eSATA cable
WiebeTech LLC
RTX100-SJ User’s Manual - 2 -
2. Take a moment to familiarize yourself with the parts of the RTX100-SJ™.
This will help you to better understand the remaining instructions.
USB Port
Power Connection
Port
eSATA Port
Power Switch
Ejection Handle
Front View
Lock
Rear View
Hardware Setup
1. Install your hard drive. RTX100-SJ features TrayFree™ technology, so installing a hard drive
couldn’t be easier! Simply pull the ejection handle to open the door, slide a SATA drive inside, and shut
the door behind it.
Place RTX100-SJ vertically on its stand.
Pull the ejection handle to open the door.
Slide in a SATA drive. The label on the
drive should be on the same side as the
white WiebeTech logo on the RTX.
Shut the door until you hear it click.
2. Plug in the data cable and power cord. The RTX100-SJ can connect to your computer in one of
two ways. Cables for both data connection types are included for your convenience. Plug the power
adapter cable into a grounded electrical outlet.
For extra security, switch the ejection
handle to the lock position.
Connect the data and power cables. Turn it on.
Your RTX100-SJ is now ready to use! Turn on the power switch on the back of the unit. If your drive is
already formatted, you can begin using it right away. New hard drives will need to be formatted before
they can be used.
WiebeTech LLC
RTX100-SJ User’s Manual - 3 -
Usage with Macintosh Computers
Compatibility
The RTX100-SJ is compatible with Mac OS 10.2.6 or later. No drivers are needed.
Mounting and Ejecting Volumes
When you connect the unit to the Mac for the first time and turn on the power, you’ll
probably see a message saying that the disk is unreadable. This is because you
must format the volume before using it. The easiest way to do this is to use Mac OS
X’s Disk Utility. If you plan to use the unit on both Macs and PCs, select “MS DOS
File System” as the format type. If you only plan to use the unit on Macs, then select
“Mac OS Extended”. After the volume is formatted, an icon representing the drive
volume will appear (“mount”) on the desktop. You can now use the volume just like an internal hard drive.
Eject the volume before powering down the unit by dragging the volume’s icon to the trash bin, or by
selecting the volume then pressing Command-E. Shutting down the unit without first ejecting the volume
can result in data loss.
Usage with Windows Computers
Compatibility
The RTX100-SJ is compatible with Windows XP and Vista. No drivers are needed.
Formatting Volumes
Before you can use your RTX100-SJ, you must first format the drives into a volume. Use Disk
Management, which you can find by right-clicking on My Computer then selecting Manage. Select NTFS
for the format type. If you wish to format FAT-32 for cross-platform compatibility, you will need to use a
third-party utility to do so. Windows XP will not create FAT-32 volumes larger than 32GB.
After the volume is formatted, an icon representing the drive volume will appear in My Computer. You
can now use the volume just like an internal hard drive.
Ejecting Volumes
If the RTX is connected to your computer via USB, always eject the device by clicking the taskbar “eject”
icon before turning off power or unplugging the data cable. Failing to do so could result in data corruption
on the drive. When connecting via eSATA, you will not be able to eject in this way. However, it is
possible to disable the device using Device Manager. Whether or not you choose to disable the device in
this way, always make sure the drives are not being accessed before shutting off the RTX100-SJ to avoid
data loss.
Warnings and Notices
•If your drive is inserted incorrectly it may cause damage to the internal connections. Be sure to only insert 3.5″
SATA drives and to insert them properly. The top of the drive should go in on the same side as the white
WiebeTech logo on the RTX.
•Do not eject the drive while it is being accessed. Data loss could result.
WiebeTech LLC
RTX100-SJ User’s Manual - 4 -
•RTX100-SJ is made of aluminum to help with cooling. Although RTX100-SJ can be used laying flat, we
recommend that you position it vertically on its stand to aid heat dissipation. 1000GB+ drives get hotter than
smaller capacity drives, so the usage of additional external cooling (such as a fan) is recommended.
•Do not move RTX100-SJ while the drive has power.
•Although a drive can be accessed without locking the ejection handle, locking is recommended to keep from
accidentally ejecting a drive while in use. Use caution when pulling on the ejection handle so that if it is locked
you do not break the handle.
Technical Specifications
Product name/code: RTX100-SJ
Host Interfaces: eSATA, USB2
Data Interface Speeds: eSATA 3.0GHz: up to 300MB/sec
USB 2.0: up to 480 Mbps
Drive Types Supported: 3.5” SATA1 or SATA2 hard drives
TrayFree™ Technology: Yes
LED: Power/HDD Activity
Operating System
Requirements:
Windows XP, Server 2003, Vista
Mac OS X 10.2.6 or later
Linux distributions using Kernel version 2.4 or above (USB only)
Operating Temperature: 50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity: 5% to 95%, noncondensing
Power Switch: 2 position: On / Off
Power Supply: Input: 100-240VAC
Output: +12/+5 V, +2/+2 A
Certifications: CE/FCC, ROHS
External Material: Aluminum alloy case
Shipping Weights: 3lbs
Dimensions: 140mm H x 207mm L x 58mm W
Warranty: 1-year limited warranty. See warranty statement for details and limitations.
WiebeTech offers free phone support for 90 days after purchase (1-866-744-
8722). After 90 days, email support is available at support@wiebetech.com.
RTX100-SJ & TrayFree are trademarks of WiebeTech LLC. Other marks are the property of their respective owners.
© 2007 WiebeTech LLC. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that your unit is plugged into a grounded electrical outlet.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact [email protected] for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact [email protected]. We
appreciate being able to serve you!
Tabla de contenidos
Otros manuales de Almacenamiento de WiebeTech
WiebeTech
WiebeTech DU8-0 Manual de usuario
WiebeTech
WiebeTech FODD Manual de usuario
WiebeTech
WiebeTech SIS2-SJ Manual de usuario
WiebeTech
WiebeTech SIS2-SR Manual de usuario
WiebeTech
WiebeTech RTX200H-QJ Manual de usuario
WiebeTech
WiebeTech ProSATA SS8 Manual de usuario
WiebeTech
WiebeTech RTX220-QJp Manual de usuario
WiebeTech
WiebeTech CGB Manual de usuario
WiebeTech
WiebeTech RF Manual de usuario
WiebeTech
WiebeTech MGB Manual de usuario
WiebeTech
WiebeTech Forensic FRTX400H-QJ Manual de usuario
WiebeTech
WiebeTech ProSATA SS8 Manual de usuario
WiebeTech
WiebeTech MG8 Manual de usuario
WiebeTech
WiebeTech TDKEX2 Manual de usuario
WiebeTech
WiebeTech BayDock 800 Manual
WiebeTech
WiebeTech TDK Manual de usuario
WiebeTech
WiebeTech RTX400-UR Manual de usuario
WiebeTech
WiebeTech I Manual de usuario
WiebeTech
WiebeTech QBD4 Manual de usuario
WiebeTech
WiebeTech RT5E Instrucciones de instalación y funcionamiento
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario