WiebeTech FOD Manual de usuario

Forensic Office Dock User’s Manual - 1 -

Forensic Office Dock™

USER’S MANUAL

Revised September 26, 2006

Features

•Patented write-blocking technology – Uses the

same, proven technology found in our other popular

Forensic products. Write-blocking prevents

corruption of evidence and maintains the integrity of

evidentiary drives. Office Dock is compatible with

forensic acquisition and analysis software.

•Easy, read-only access to suspect drives –

Forensic Office Dock fits right in your desktop

computer bay and gives you convenient access to

power and an IDE port from the front of the unit.

•A snap to install and use – Office Dock features a SafeEject™ IDE connector to save on wear and

tear. SafeEject's special ejection levers help prevent bending IDE pins. An on/off switch and

power/access LEDs make operation easy.

•Hot-swappable – No need to restart the computer between data acquisitions. Just connect the drive,

turn on the dock, and you’re ready to go!

•Optional adapters allow access to all kinds of drives – Office Dock comes ready for use with 3.5"

IDE drives, and works with many other drives (including SATA drives) via WiebeTech's lineup of Combo

Adapters.

•Aluminum design – Both durable and attractive.

Forensic Device User Advisory

We recommend that you perform a final check on this product.

Prior to first use, please verify that the write-blocking function of this product is working properly. This is

easily done: attach a known good formatted drive, and verify that the drive mounts properly on your

computer. Use a drive that has data on it that you are willing to overwrite. Transfer files to the drive. The

files will appear to transfer to the drive. Thereafter, unmount the drive and remount the drive. The files

that you wrote to the drive should not appear after the drive is remounted. If they do appear, there is a

problem with your Forensic Device, and you should contact our support department for further

instructions.

WiebeTech support may be reached at:

(866) 744-8722 (toll free)

(316) 744-8722 (international)

(316) 744-1398 (fax)

[email protected] (email)

WiebeTech LLC

Installation Instructions

1.Check the accessories with your Forensic Office Dock. Please contact WiebeTech if any items

are missing or damaged. The box should contain:

Forensic Office Dock 1

IDE cable 1

Power cable 1

Case mounting screws 6

Metal bottom plate 1

Hard drive screws 4

Rubber bumpers 4

Manual and Warranty information (on CD)

2. Take a moment to familiarize yourself with the parts of your new DriveDock. This will aid you in

the remaining steps.

Forensic Office Dock User’s Manual - 2 -

front back

A4-pin power connector

BIDE connector

CPower Switch (On / Off)

LEDs

Power

Drive Access

a4-pin power input (from computer’s PSU)

bFireWire 800 ports

cPower Switch

3. (Optional) Install a FireWire host card inside your computer. If you already have an internal

FireWire host, you may skip this step. The following general steps will work for most PCI expansion

cards. Instructions for individual cards may vary, so consult your host card’s user manual.

a) Make sure the computer is powered down. Unplug it from the

electrical outlet.

b) Remove the retaining screw and blank slot cover for the

expansion slot you wish to use. You may use any available slot.

c) Insert the expansion card into the slot. Do not force it, but it will

take firm pressure to insert it. It may help to rock the card gently

back and forth while pushing into place.

d) Make sure the card is fully seated in the slot. Use the retaining

screw to secure the card in place.

e) Most FireWire cards are Plug and Play, but if your card requires drivers, install them turning the

computer back on.

WiebeTech LLC

4. Connect one end of the FireWire cable to the internal FireWire host.

5. Mount the Office Dock into an empty 5 ¼” Bay inside

your computer. Do not screw it into place until all the cables

have been connected. Connect the other end of the FireWire

cable to the rear side of the Office Dock.

Forensic Office Dock User’s Manual - 3 -

6. Connect a free power cable from your computer’s power supply to the rear side of the Office

Dock.

WiebeTech LLC

7. Position the Office Dock within the bay until it reaches the depth you prefer. There are two

possible positions: you can mount it so that the face is flush with the case, or extending outward about

half an inch. When the dock is in position, secure it in place with screws.

8. Attach the IDE and power cables to the front of the Office Dock. The IDE interface uses a

SafeEject™ IDE connector to save on wear and tear. SafeEject's special ejection levers help prevent

damage to IDE pins. Make sure the levers are in the outward position before plugging in the IDE cable.

As you push the IDE connector into position, the levers will automatically close and lock it in place.

Levers in the

outward position

9. Attach metal bottom plate to your 3.5” hard drive. This step is

optional but recommended. The purpose of the bottom plate is to provide

protection to your drive electronics and aid heat dissipation. Attach the

bottom plate to your drive using the four screws supplied. Attach a rubber

bumper to each corner. Extra bottom plates are available from WiebeTech.

10. Configure the jumpers on your hard drive. The drive must be set to the Master setting. Consult

the instructions for your drive (some drives display configuration information on the drive’s label). A few

drives have both “Master with Slave Present” and “Master without Slave” options. Choose the latter in

this case. In rare cases, if the Master setting does not work then try Cable Select.

(Example)

Forensic Office Dock User’s Manual - 4 -

WiebeTech LLC

11. Connect the IDE and power cables to your hard drive.

A. Attach the free end of the IDE ribbon

cable to the back of the hard drive. The

connector is keyed to insert only one way.

The IDE pins on the hard drive are fragile, so

be very careful when inserting or removing

the IDE connector.

B. Attach the 4-pin power connector from

the dock into the back of the hard drive. As

with the IDE cable, the power connector will

only fit one way.

Your Dock is now ready to use! Use the power switch to turn on the unit. The red LED access indicator

will light briefly after the unit is powered up, indicating that the FireWire bridge has successfully

established communication with the drive. Thereafter, it will light whenever the drive is accessed. If the

access LED does not blink shortly after drive spin up, it may indicate a problem with the drive or the dock.

If the access LED blinks at a steady rate, this also may be indicative of a problem or an incorrectly

jumpered drive. Contact technical support for further assistance if necessary.

Technical Specifications

Product Code FOD

Interface FireWire 800 using OXFW922

Power Input Standard 4-pin Molex power jack (+12V / +5V) from computer’s PSU

Power Output +12V / +5V to hard drive

Power Switch On / Off

LED Indicators 1. Power ON/OFF

2. HDD activity

Operating Temperature 50 – 85° Fahrenheit (10 – 30° Celsius)

Operating Humidity 5% to 95%, noncondensing

Compatibility 3.5-inch IDE drives (can be used in conjunction with WiebeTech’s Combo

Adapters for a variety of other drive types)

Operating System Windows XP

Mac OS 9.2, OS X

Linux distributions supporting FireWire

Shipping Weight 3 pounds

Dimensions 5.6” x 3.1” x 1.5” (143mm x 78mm x 39mm)

Dimensions are exclusive of attached plates, drives, and cables.

Warranty 2-year limited warranty. See warranty statement for details and limitations.

WiebeTech offers free phone support for 90 days after purchase (1-866-744-

8722). After 90 days, email support is available at [email protected].

Forensic Office Dock User’s Manual - 5 -

WiebeTech LLC

Forensic Office Dock is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.

FCC Compliance Statement. “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.”

Forensic Office Dock

Tested to comply

with FCC standards

FOR HOME OR OFFICE USE

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

1) Ensure that the bottom plate and case of your attached drive is grounded, either to the DriveDock case or to an Earth ground.

2) Use a FireWire cable with RFI reducing ferrites on each end.

3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

If you have any questions or problems, please contact [email protected] for technical support. If you are

interested in purchasing more WiebeTech products, check our website or contact sales@wiebetech.com. We

appreciate being able to serve you!

Forensic Office Dock User’s Manual - 6 -

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de WiebeTech

WiebeTech

WiebeTech MJ 1 Manual de usuario

WiebeTech

WiebeTech SIS4-SJ Manual de usuario

WiebeTech

WiebeTech RTX200H-QR Manual de usuario

WiebeTech

WiebeTech RT5 Manual de usuario

WiebeTech

WiebeTech Forensic FRTX400H-QJ Manual de usuario

WiebeTech

WiebeTech SIS 1 Manual de usuario

WiebeTech

WiebeTech ProSATA SS8 Manual de usuario

WiebeTech

WiebeTech RT5E Instrucciones de instalación y funcionamiento

WiebeTech

WiebeTech G5J Manual de usuario

WiebeTech

WiebeTech TDKES2 Manual de usuario

WiebeTech

WiebeTech TDKEX2 Manual de usuario

WiebeTech

WiebeTech Forensic UltraDock FUDv6 Manual de usuario

WiebeTech

WiebeTech ToughTech FS Mini 500GB Manual de usuario

WiebeTech

WiebeTech DU8-0 Manual de usuario

WiebeTech

WiebeTech SIS2-FH Manual de usuario

WiebeTech

WiebeTech SIS5-SJ Manual de usuario

WiebeTech

WiebeTech SDGB Manual de usuario

WiebeTech

WiebeTech RT8 Manual de usuario

WiebeTech

WiebeTech CGB Manual de usuario

WiebeTech

WiebeTech MG8 Manual de usuario

WiebeTech

WiebeTech RT5 Manual de usuario

WiebeTech

WiebeTech FODDP Manual de usuario

WiebeTech

WiebeTech RTX400-NJ Manual de usuario

WiebeTech

WiebeTech SIS2-SR Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario