WiDrive DX-325 Manual de usuario
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
User’s Manual
Wireless 802.11n Multi-functional Storage Router
DX-325
Version 0.4
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
ii
Table of Contents
Declaraons, disclaimers, instrucons of guidings iii
Safety and care instrucons iv
1 Understand Your WiDRIVE 1
Overview of Your WiDRIVE DX-325 1
Package Content 2
The LED Status Indicators 2
Understand the LED indicators 3
Power on Your WiDRIVE 3
Shutdown Your WiDRIVE 3
Mode Selecon 3
2 Setup Your WiDRIVE 5
HDD Installaon 5
AP Mode Setup 6
Client Scan Mode Setup 7
USB Mode Setup 8
3 WiDRIVE Utility 9
Install your WiDRIVE Ulity 10
To search and operate your WiDRIVE through Ulity 10
4 WiDRIVE Web Control 11
Login 11
Overview of WiDRIVE Web Control 11
My Folder (Disk Management) 12
Working with Folders and Files 13
Quick Connecon 16
BitTorrent 17
System Seng 19
Account Seng 23
System Status 24
Maintenance 26
5 WiDRIVE Applications 28
The Default Applicaons in your WiDRIVE 28
6 Specification 30
7 Regulatory Information 31
FCC Compliance 31
CE Compliance 31
8 Trouble Shooting 33
9 Contact Information 34
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
iii
Declarations, disclaimers, instructions of guidings
Note, Noce, Cauon symbols among the user manual
NOTE!
Provides extra informaon for beer use of the products.
Noce!
Indicates behaviours that might cause a potenal data loss on WiDRIVE or on the device that con-
nects to it.
Cauon!
Indicates behaviours that might cause damage on product, human injury, or death.
Declaraon
Informaon in this document is subject to change without noce or obligaon.
Copyright © 2010 EDSLAB Technologies Inc. All rights reserved.
Disclaimer
Any loss, corrupon or destrucon of data while using a WiDRIVE is the sole responsibility of the
user, and under no circumstances will EDSLAB be held liable for the recovery or restoraon of this
data. To help prevent the loss of your data, EDSLAB highly recommends that you at least keep one
copy of your data. For example, you can save the copy either on your internal hard disk or portable
storage media.
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
iv
Safety and care instructions
Please read the following safety informaon prior to using WiDRIVE.
• Only qualied personnel should service WiDRIVE. Faulty installaon or service may be dangerous
and may invalidate any warranty applicable to WiDRIVE.
• WiDRIVE can cause interference to pacemakers, hearing aids, and medical equipment. Keep safe
distances from medical devices when operang in such environments.
• Do not store or carry ammable liquids, gases, or explosive materials in the same compartment as
WiDRIVE.
• Switch your WiDRIVE o when in any area with a potenally explosive atmosphere, and obey
all signs and instrucons. Sparks can cause an explosion or re resulng in bodily injury or even
death.
• Do not drop or knock WiDRIVE. Rough handling can damage the electronics board and hard drive
in WiDRIVE.
• Do not expose WiDRIVE to extreme temperature. Do not put WiDRIVE on heang devices such as
microwave oven, stove, or radiator. The device may explode when overheated.
• Clean WiDRIVE surface with so damp cloth. Do not use any cleaning agent.
• Keep WiDRIVE dry. Any precipitaon, humidity, and liquids can corrode electronic circuits in WiD-
RIVE.
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
1
1 Understand Your WiDRIVE
Overview of Your WiDRIVE DX-325
• LED status indicators
• Antenna
• Power buon
• WAN port
• DC power input
• Mini USB port
• AP /Client Scan mode switch
• Reset
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
2
Package Content
Your WiDRIVE DX325 has shipped along with the following content. Ensure you have all the
following items.
WiDRIVE DX-325 Quick Start Guide Ulity CD with Manual
5V 2A power adapter Ethernet cable (40cm) Mini USB to USB cable (40cm)
The LED Status Indicators
• System indicator
• LAN indicator
• WiFi indicator
• HDD indicator
G
G
B
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
3
Understand the LED indicators
Indicator Status Indicaon
Power on Green
Boong up Flashing between orange and green
System ready Green
Shung down Flashing between orange and green
Not ready Flashing between orange and green
WiFi ready Green
WiFi on work Flashing green
LAN port plugged in Green
Data transferring Flashing green
Data transferring Flashing between orange and green
Power on Your WiDRIVE
Press the Power buon to power on your WiDRIVE.
Shutdown Your WiDRIVE
Normal shutdown
You can click Shutdown buon on Maintenance page in web control or shortly press the Power
buon to normal shutdown your WiDRIVE.
Force shutdown
Long press the Power buon to force shutdown your WiDRIVE.
Noce!
Performing force shutdown might cause potenal data damage to HDD installed in your WiDRIVE.
Mode Selection
You can connect your device with WiDRIVE in three ways: Access Point (AP) mode, Client Scan
mode, and USB mode.
Access Point (AP) Mode
Your WiDRIVE performs as a wireless storage router in AP mode.
Slide the mode switch down and power on your WiDRIVE.
Connect WiDRIVE and router/modem with an ethernet cable, and then
wirelessly connect your PC to WiDRIVE (See “AP Mode Setup” on page 6 to
setup AP mode).
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
4
Client Scan Mode
Your WiDRIVE performs as a driverless 802.11N wireless adapter in Client Scan
mode.
Slide the mode switch up and power on your WiDRIVE. Connect your computer
with WiDRIVE by an ethernet cable, and then wirelessly connect your WiDRIVE
to a router (See “Client Scan Mode Setup” on page 7 to setup Client Scan mode).
USB Mode
Connect WiDRIVE and your computer with an USB cable, your WiDRIVE is behaved as an external
storage device in USB mode.
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
5
2 Setup Your WiDRIVE
HDD Installation
Please follow these 3 steps to install a HDD.
1. Dissemble the HDD side cover.
i. Press the back of the middle frame to loosen the hook.
ii. Take apart the HDD side cover.
2. Slide HDD into SATA connector (ensure HDD is fully inserted into connector).
3. Hook on and then push the side cover toward the middle frame unl you hear a click.
WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
6
AP Mode Setup
In AP mode, your WiDRIVE connects to and shares the internet. Your devices connects to
WiDRIVE wirelessly:
1. Slide the mode switch to AP mode.
2. Connect your WiDRIVE with internet/DSL/modem with an ethernet cable.
3. Connect the power cable to your WiDRIVE and power on your WiDRIVE.
4. Now your WiDRIVE behaves like an wireless router. Connect your WiDRIVE by Windows XP.
i. Open Windows Start Menu, select “Connect To”, le-click “Wireless Nerwork
Connecon”.
3
1
2
4
CLIENT SCAN
AP
Internet/modem/DSL
Otros manuales para DX-325
1
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de WiDrive
